Add one pint (16 oz.) of TRANS TUNE to the transmission filler. When adding before a fluid change, drive at least 30 miles to circulate and clean before replacing fluid. When used as a cleaner or conditioner, add TRANS TUNE for the life of the fluid interval. Compatible with all fluid flushing machines.
Can I use sea foam Hydra Trans Tune to condition my transmission?
It can be used to condition your power steering system, as a pre-flush, or even in hydraulic jacks and other hydraulic fluid systems. With proper use, Sea Foam Hydra Trans Tune will keep your transmission in top shape for many miles to come. We also added some Sea Foam Hydra Trans Tune to the power steering pump for good measure.
How to use Trans Tune transmission fluid?
Directions 1 With transmission at operating temperature, check the fluid level to make sure the fluid volume does not exceed the manufacturer’s recommendation. 2 Add one pint (16 oz.) of TRANS TUNE to the transmission filler. ... 3 When used as a cleaner or conditioner, add TRANS TUNE for the life of the fluid interval. ...
What is Trans Tune?
TRANS TUNE works fast to dissolve harmful deposits and control the moisture that impairs fluid systems. TRANS TUNE will help restore shift quality by cleaning sticky varnish from valve bodies and shift solenoids. TRANS TUNE is compatible with all conventional and synthetic petroleum and mineral-based automatic transmission fluids.
How much trans fluid do I put in my transmission?
With transmission at operating temperature, check the fluid level to make sure the fluid volume does not exceed the manufacturer’s recommendation. Add one pint (16 oz.) of TRANS TUNE to the transmission filler. When adding before a fluid change, drive at least 30 miles to circulate and clean before replacing fluid.
How do you use seafoam Hydra Trans tune?
Add one pint (16 oz.) of TRANS TUNE to the transmission filler. When adding before a fluid change, drive at least 30 miles to circulate and clean before replacing fluid. When used as a cleaner or conditioner, add TRANS TUNE for the life of the fluid interval.
How much Hydra Trans Tune can you add to the transmission fluid?
Add 4 to 6 ounces of HYDRA TRANS TUNE to steering fluid reservoir to clean and condition system parts for the life of the fluid. Can be added to fluid reservoir at any time!
What does seafoam TRANS TUNE do?
TRANS TUNE is an excellent hydraulic fluid system cleaner and conditioner that works safely and quickly to clean sticky pressure valves, solubilize moisture, and dissolve varnish formations in hydraulic fluid. Can add any time as a pre-flush cleaner or to help keep systems clean over the life of the hydraulic fluid.
How do you use automatic transmission treatment?
Directions For Use Trucks use 1 bottle for every 10 litres oil capacity. Shake well before use. With engine running and vehicle in park, add contents to transmission via dipstick tube or oil filler. Drive for approximately 5 minutes to circulate the product.
What is the best additive for transmission slipping?
Our pick for the best transmission additive is the Prolong Super Lubricants PSL15000. It is one of the best transmission additives on the market. It reduces leaks, shudders, slippage, and sludge buildup. For a less pricey option, consider the Lucas LUC10009.
Can you put seafoam in hydraulic fluid?
It's safe for use in all types of petroleum-based hydraulic fluid and will not harm gaskets and O-rings or swell seals.
How do you fix a slow shifting transmission?
0:313:04How to Fix Transmission Shifting Problems in Your Car (Fluid Change)YouTubeStart of suggested clipEnd of suggested clipPull off the dipstick. Hey. It's really dirty supposed to be red it's black. So we're going toMorePull off the dipstick. Hey. It's really dirty supposed to be red it's black. So we're going to change the filter and the fluid in the transmission a lot of times that will fix it.
When should I use SeaFoam?
For maintaining the health of a vehicle that's driven regularly, it's a good idea to add one or two cans of Sea Foam to the fuel for every 2,000 to 5,000 miles that are driven. If you use your vehicle less frequently, it's recommended that you add Sea Foam to every tank of fuel.
What can I use for a slipping transmission?
8 Great Additives to Reduce Automatic Transmission SlippingLucas Transmission Fix.Hot Shot's Secret Shift Restore.Prolong Super Lubricants Transmission Treatment.Lubegard Instant Shudder Fixx.Sea Foam Trans Tune.Liqui Moly ATF Additive.XADO Revitalizant EX120.zMAX Transmission Formula.
How long does it take for transmission additive to work?
After adding it to your transmission, you should drive around for 15 – 20 minutes in order for it to fully blend with the existing fluid. You should notice the effects almost immediately.
How can I make my automatic transmission shift smoother?
There are 6 ways to improve automatic transmission performance and reliability. These are servicing the transmission, changing driving habits, driving with lower gears when loaded, maintaining engine performance, having proper alignment of tires, and having the correct tire size.
Should I put an additive in my transmission?
As long as the owner of the vehicle takes the time to makes sure there is enough transmission fluid in it and they change the transmission fluid when it is dirty there should be no need for an automatic transmission fluid additive.
What happens to transmission fluid over time?
Transmission fluid is very thin and very slippery, but over time, the fluid picks up residue, clutch material, and dirt and over time can start to form varnish which then flow through the transmission and can start to restrict flow in critical passageways. This leads to buildup on the solenoids and valves in the regulation system ...
How to check transmission fluid on a suburban?
You need to check the transmission fluid using the dipstick. The Suburban has a locking lever on the end of the dipstick. Refer to your owner’s’ manual for the exact fluid check procedure. The fluid is clear and the right deep cherry red color. If the fluid is milky, brown, or murky, you likely need a change.
What is automatic transmission?
Automatic transmissions are complicated components; in fact they are one of the most complicated devices in your car. Before computer-controls, automatic transmissions were even more complicated. Inside every automatic transmission is an amalgam of parts that use transmission fluid to not only shift gears, but also regulate ...
How much does it cost to rebuild an automatic transmission?
The average cost of an automatic overdrive transmission rebuild is nearly $2,000 or more, including install.
Does Hydra Trans Tune last longer?
Hydra Trans Tune is not just for transmissions either.
Does Hydra Trans Tune change transmission fluid?
Hydra Trans Tune is 100% petroleum-based and does not alter the viscosity of the transmission fluid. Using a funnel, half of the can was poured into the dipstick tube.
Does sea foam trans tune really work?
Yes. Sea foam trans hydra tune does work. You must know where to use it though for you to get the result that you want. As has been mentioned earlier, trans tune works for three main systems in your car. These systems are namely the automatic transmission system, hydraulics system, and power steering system.
What are the benefits of using sea foam hydra trans tune?
Before you learn how to use sea foam hydra trans tune, you must first know about its benefits for your car. The best thing about trans tune is that it is safe for the hydraulic system. Here is a list of the things you will gain from using sea foam hydra trans tune.
How to use sea foam hydra trans tune for cleaning?
There are several things you have to know in order to use the trans tune more effectively. In the previous section, you have learned that the trans tune can be used for different system fluids. Aside from knowing how to use sea foam hydra trans tune, you must also know the right amount to use for different purposes.
How do you use seafoam before an oil change?
When it comes to oil change, the right amount of sea foam hydra trans tune to apply is an ounce for every quart of oil. Do not apply sea foam hydra trans tune needlessly. Adding trans tune to the oil change after every 100 to 300 miles drive is highly recommended for more effective fuel system clean up.
How do I add a trans tune to power steering?
Trans tune products usually contain a manufacturer’s instructions to guide you on how you should use it in power steering fluid systems or how to use sea foam hydra trans tune for other purposes.
When should I use Sea foam?
Preceding the question of how to use sea foam hydra trans tune is when to use it. Timing is also a key part in achieving desirable results to any product so you must consider incorporating sea foam to your vehicle at least once every three months. This frequency is recommended for vehicles that have smaller engines.
Does sea foam clean power steering?
Yes. Sea foam can clean power steering. As mentioned in the section above, one of the ways on how to use sea foam hydra trans tune is for cleaning the power steering reservoir. This keeps the steering fluid clean and free from residues that may contaminate it as well as improves the quality of the fuel to make it last longer.
HELP YOUR TRANSMISSION SHIFT SMOOTHER AND LAST LONGER
Helps restore shift quality by cleaning sticky varnish from valve bodies & shift solenoids.
FIRST AID FOR HYDRAULICS!
Use Trans Tune in hydraulic fluid systems to help solve & prevent problems caused by sticky residues & moisture in fluid. Help your fluid system work better & last longer!
How does trans tune work?
Trans Tune Works to dissolve harmful contaminates and moisture that impairs system performance. It's formula is compatible with all common petroleum, mineral, and synthetic-based hydraulic and transmission fluids. Trans Tune does not harm or swell seals and will not alter the viscosity of fluids. Trans Tune Works to dissolve harmful contaminates ...
What is trans tune?
Petroleum-based additive that is safe for internal components. Trans Tune Works to dissolve harmful contaminates and moisture that impairs system performance. It's formula is compatible with all common petroleum, mineral, and synthetic-based hydraulic and transmission fluids.
Does trans tune harm seals?
It's formula is compatible with all common petroleum, mineral, and synthetic-based hydraulic and transmission fluids. Trans Tune does not harm or swell seals and will not alter the viscosity of fluids. Safely cleans varnish, deposits and moisture. Petroleum-based additive that is safe for internal components.