How much HTH shock do I need for a 5000 gallon pool?
Typically for granular shock, you'll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn't a one-size-fits-all answer.
How long after HTH ultimate shock Can you swim?
within 24 hoursThe fast-dissolving formula found in HTH shock treatments acts quickly to restore clarity to your water so you can be back in the swimming pool within 24 hours.
How do you use HTH ultimate chlorinating granules?
USE: Apply directly to pool water, broadcasting it evenly over a wide area in the deepest part of the pool. Add granules while filter pump is running during the evening. Use clean, dry scoop only used for this product.
How do you shock a 5000 gallon pool?
0:431:24How to shock your pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo be sure to add shock in the evening. Make sure your pump is running just snip the corner off theMoreSo be sure to add shock in the evening. Make sure your pump is running just snip the corner off the package and sprinkle it in along the deepest end of your pool. If any granules settle in the bottom.
How much shock do I need for a 1000 gallon pool?
Answer: The best thing to do is to take the reading for free chlorine first; then you can use pool calculator to find the amount of chlorine to add. Your free chlorine should always read 3 ppm. A 1000 gallon pool may just need 0.13 ounces or a little higher.
What happens if you swim in a shocked pool?
What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.
How much HTH do you put in a pool?
Shock treat with three cups of HTH granular or a sachet of HTH Shock It, following the instructions on the pack. Set the pool on filter for 24 hours. Backwash the pool for two minutes and rinse for 20 seconds.
How much HTH do I need?
SKIMMER NOTES: Calculate your total pool volume first, then check the package of shock for dosing recommendations by volume. Typically for granular shock, you'll need one pound for every 10,000 to 13,500 gallons of pool water.
Can you use HTH in a plastic pool?
Apparently HTH is too aggressive for the plastic pools. The Synergy System is only for when the water is not clear.
How much shock do I need for a 6000 gallon pool?
Oxidize (shock) weekly using 1 lbs. of Burn Out 35®, per 6,000 gallons of water. NOTE: Be sure to remove your cover before shocking and leave it off at least 8 hours.
How much shock do I need for a 10000 gallon pool?
One poundOne pound of shock treats up to 10,000 gallons of pool water. Also, keep the pool filter and pump running for at least 10 hours during and after you shock.
Can I swim 12 hours after shocking pool?
After Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
Why use our products?
Led by our hth ® Calcium Hypochlorite pool sanitiser - recognised worldwide, our range of pool maintenance products, compact equipment and experienced support teams can help you keep your pool water clean, clear, healthy and ultimately enhance bathers’ experience. Compare hth ® Calcium Hypochlorite with alternative disinfection methods:
Why talk to us?
Are you a pool manager for a hotel, leisure complex, or campsite? Not satisfied with your existing pool maintenance program? Let us help you find the most appropriate treatment. Our dedicated sales and technical teams have a wealth of industry experience and can offer a 'no obligation' site survey to assess your needs.
