What are the best facial treatments?
Nov 11, 2020 · The Pixel laser is an FDA-cleared in-office skin-rejuvenation treatment. It uses fractional resurfacing to refresh sun-damaged skin and reduce the appearance of acne scars, large pore size, age spots, uneven skin tone, and fine lines. Pixel laser resurfacing also delivers some mild skin tightening, but it’s not recommended to treat moderate to severe sagging skin …
What is the best facial treatment for skin?
Pixel Laser Resurfacing is a state-of-the art skin rejuvenation treatment that is commonly referred to as the next generation of fractional laser treatments. It helps to improve skin texture, lighten pigmentation, soften wrinkles, reduce pore size, and smooth out scars (including acne scars) and stretch marks without the recovery time and discomfort associated with other resurfacing lasers.
What is the best facial treatment for aging?
Sep 28, 2021 · The Pixel CO2 laser is an ablative, fractional skin resurfacing device that improves the appearance of scars, skin discolorations, fine lines, and other imperfections. Here is a quick guide for what to expect before, during, and after a Pixel CO2 laser treatment. Before Treatment A retinol cream or hydrocortisone pretreatment may be prescribed
What is pixel treatment?
Pixel® is an FDA-approved resurfacing treatment that makes microscopic holes to the skin’s surface via targeted laser energy. The process leads to new collagen growth for firmer, smoother, and more youthful skin. Treatments are customized to suit your individual needs and address your unique concerns.
How long do Pixel laser results last?
Improvements in fine lines and wrinkles and looseness of the skin normally takes multiple sessions to see. Since Pixel promotes continuous new collagen growth, improvements will continue to be seen up to about four to six months after your final treatment. will yield brighter, fresher, and more relaxed skin.
Does Pixel laser really work?
Pixel skin resurfacing has been shown to improve or eliminate extensive scars from surgeries or accidents, eliminate acne scars, and reduce or eliminate age spots. This type of treatment has been reported to even correct the most heavily photo damaged skin by improving skin tone and texture within a few days.
Is Pixel laser painful?
Is it painful? The Pixel laser treatment is very well tolerated and has almost no discomfort - a significant advantage over some other fractional resurfacing devices.
Is Pixel better than Fraxel?
Fraxel Laser: Fraxel lasers are CO2 lasers that deliver more heat to skin tissue. This results in greater collagen stimulation for a more dramatic improvement. Pixel Laser: Pixel lasers are Erbium lasers, which penetrate skin tissue less deeply than a Fraxel laser.
How often can you do Pixel laser?
Multiple treatments are required to get the best results. We usually suggest a treatment program of 3–5 treatments, normally spaced 4 weeks apart. The number of treatment sessions that you require will vary depending on what we problem we are addressing.
Can I wash my face after Pixel laser?
Cleanse your newly lased skin with warm or cool water only during the first 12 hours. You may begin using a gentle cleanser such as Cetaphil liquid cleanser at that time. Be sure the product you use contains none of the above mentioned ingredients that can irritate your skin.
What is Pixel procedure?
Pixel is a revolutionary FDA-approved skin treatment that utilizes a fractional laser to clear years of sun damage, acne scarring, fine lines and wrinkles, and shrink pores. It can also heal blotchy pockmarks to return your skin to a healthy, youthful looking radiance.
What are the side effects of laser treatment on face?
RisksRedness, swelling, itching and pain. Treated skin may swell, itch or have a burning sensation. ... Acne. Applying thick creams and bandages to your face after treatment can worsen acne or cause you to temporarily develop tiny white bumps (milia) on treated skin.Infection. ... Changes in skin color. ... Scarring.Mar 2, 2022
Does Pixel laser cause hyperpigmentation?
While fractional lasers are considered safe for patients with darker skin tones, they are at an increased risk for having erythema and pigmented areas with resulting post inflammatory hyperpigmentation. The darker your skin tone, the more difficult it can be to lighten this epidermal melanosis.
Is pixel a CO2 laser?
Pixel CO2 Fractional Laser Skin Resurfacing precisely removes outer layers of damaged skin to reveal the underlying skin which is softer, smoother, and younger looking.
What is ResurFX laser?
ResurFX is a non-ablative, fractional laser skin resurfacing treatment. That just means it's gentle and only affects a portion, or a fraction of your skin. Because the laser is fractional and can target cells directly, it can provide a noticeable improvement to your skin with minimal discomfort and downtime.
What is Deep FX laser treatment?
A: Deep FX is a fractional laser procedure used to improve the appearance of aged, sun-damage or scarred skin. The Deep FX laser penetrates deeper into the dermal layers of the skin than the Active FX and is a better treatment for deeper wrinkles.
What is a Pixel laser treatment?
The Pixel laser is an FDA-cleared in-office skin-rejuvenation treatment. It uses fractional resurfacing to refresh sun-damaged skin and reduce the...
What are the pros and cons of Pixel laser treatment?
ProsPixel skin resurfacing treatments are effective at improving skin texture and signs of aging. The treatment is relatively painless, thanks to a...
How much does the Pixel laser cost?
The price you pay for your Pixel laser treatment will depend on your provider's level of experience, their practice location, and how many treatmen...
What happens during a Pixel laser treatment?
Before the procedure begins, your doctor will cleanse your skin and numb the area with a local anesthetic or numbing cream. You’ll put on goggles t...
How long does it take to heal from Pixel laser?
Recovery from a Pixel laser treatment can take one to two weeks, less than half of the recovery time expected with a typical ablative laser treatme...
Does Pixel skin resurfacing work?
Pixel skin resurfacing works to even out skin texture, tone, and pigmentation. "You will see initial results in seven days and, as long as the trea...
Does Pixel skin resurfacing help with stretch marks?
It can, but it's not usually the best option. For new stretch marks that look red or purple, a pulsed dye laser should be considered as a first-lin...
Pixel laser vs. Fraxel laser: What’s the difference?
Fraxel is another brand of ablative fractional resurfacing laser that uses intense, focused light to treat sun damage, reduce wrinkles, and improve...
What is pixel laser resurfacing?
What does Pixel Laser Resurfacing Treat? This treatment is ideal for softening fine lines and rough skin texture, minimizing large pores, reducing brown pigment and evening out skin tone, lessening the presence of melasma (mask of pregnancy), and improving the appearance of acne scars, surgical scars, and stretch marks.
What does it feel like to beep with a pixel laser?
You may feel a prickling sensation and hear the beeping sound of the Pixel Laser. After the treatment is completed, a topical anesthetic will be applied to alleviate any sensation remaining (be sure to alert us if you have any allergy or sensitivity to topical anesthetics).
Does pixel laser work?
Pixel laser treatment also tightens loose skin by stimulating new collagen formation, ...
How many treatments are needed for Pixel 2940?
Multiple treatment sessions are required with Pixel® 2940 to obtain optimal results. A treatment programme of 3 – 5 treatments, spaced 1 – 4 weeks apart is recommended by the manufacturers to achieve the best results for indications such as sun damage, acne scars, enlarged pores and rough skin texture, fine lines and pigmentation.
When was the Pixel 2940 FDA approved?
The Pixel® 2940 was cleared by the FDA (Food & Drug Administration) for fractional ablative laser skin resurfacing in 2006 and also recieved the European CE Mark in September 2006.
What does a laser do to the skin?
Every time the laser passes over the skin, some of the outermost layers of the skin are removed in a precise and controlled way to the appropriate depth. The Pixel® 2940 hand piece is designed to be incorporated as ...
When was the Pixel 2940 laser made?
Launched in the US in April 2006, the Pixel® 2940 laser device from Alma Lasers (distributed in the UK by Advanced Beauty Cosmetics Ltd) uses fractional ablative technology for the treatment known as fractional laser skin resurfacing , aimed at rejuvenating aged and sun damaged skin with less downtime than normally associated with traditional ablative laser skin resurfacing procedures.
What is a Pixel 2940?
The Pixel® 2940 machine is used for the treatment known as skin rejuvenation , which includes; the reduction and possible removal of fine lines and wrinkles, improvement of deeper wrinkles, repair of sun damaged skin, the reduction of age spots and blemishes, acne scars and hyperpigmentation (areas of darker pigment or brown patches in the skin).
How to recover from pixel laser?
Recovery following a Pixel CO2 laser skin resurfacing treatment consists of keeping the skin moisturized during the healing process. Patients will be instructed to use a thick ointment such as petroleum jelly or Aquaphor as needed to keep the skin hydrated. Do not peel or pick at any flaking skin. Once the skin has peeled, apply a sunscreen daily. Skin may be pink or red for several days.
How long does it take for a pixel to work?
Most ablative skin resurfacing treatments require up to 3 weeks of recovery time, whereas with a Pixel treatment, patients can return to most normal activity within 1 week. While many patients will see improvement in their skin concerns after 1 treatment, a series of up to 4 treatments may be needed for optimal results.
What are the side effects of pixel laser?
Side effects from Pixel CO2 laser skin resurfacing may include burns or other injuries from the laser's heat, scarring, changes in skin pigmentation, cold sore blemishes, bacterial infection, and milia.
What is a Pixel CO2 laser?
The Pixel CO2 laser is an ablative, fractional skin resurfacing device that improves the appearance of scars, skin discolorations, fine lines, and other imperfections. Here is a quick guide for what to expect before, during, and after a Pixel CO2 laser treatment. Previous.
What is a fractional laser?
Fractional lasers direct laser energy into precise columns for targeted treatment as opposed to non-fractional lasers which treat an overall area. The Pixel CO2 laser is an ablative, fractional laser. Unlike other lasers within the same category, the Pixel CO2 laser does not require patients to undergo a lengthy recovery period.
What is laser resurfacing?
There are a number of skin resurfacing treatments available to lessen the appearance of skin blemishes such as melasma, acne scarring, sun damage, and fine lines. Chemical peels, microneedling, and dermabrasion treatments can all improve these imperfections, however, laser resurfacing remains a patient ...
How long does it take to get a laser face treatment?
Typically, full face treatment can be completed in less than 15 minutes. Patients will likely experience a sunburned sensation as well as redness in the treated area.
How Does It Work?
Pixel® is an FDA-approved resurfacing treatment that makes microscopic holes to the skin’s surface via targeted laser energy. The process leads to new collagen growth for firmer, smoother, and more youthful skin. Treatments are customized to suit your individual needs and address your unique concerns.
Am I A Good Candidate?
If you are seeking a long-term solution with little downtime for fine lines, wrinkles, or shallow acne scars on your face, you may be a good candidate for Pixel® fractional resurfacing. Pixel® is safe and effective for most skin types, textures, and tones. Consultation required prior to treatment.
Is There Any Downtime?
Because Pixel® only targets the skin’s surface, it makes the healing time much faster. Unlike traditional resurfacing lasers which can cause rawness and swelling, Pixel® promises skin improvements with relatively little or no downtime. Treatment is described only as a mild warming sensation and requires no downtime post-procedure.
What is pixel laser?
Pixel laser resurfacing is a type of laser skin treatment that is used for cosmetic rejuvenation. It differs from other types of laser resurfacing in that the recovery period is neither as long or as obvious.
Where can I use pixel laser resurfacing?
Pixel laser resurfacing can be used on the neck, chest, and hands, in addition to the face, which are all areas that commonly show signs of age.
How does laser resurfacing work?
The laser works in two ways, it removes the outer layers of the skin that are damaged, and it stimulates the skin to produce collagen. The production of collagen smooths fine lines and wrinkles so well that it makes a suitable replacement for Boto x injections. Pixel laser resurfacing may reduce the appearance of stretch marks.
How long does it take for pixel laser resurfacing to clear?
While some mild redness is common after a pixel laser resurfacing treatment, it is not nearly as extensive as with more traditional laser treatments, and typically clears up within a day or so. Pixel laser resurfacing can be used to reduce the size of pores.
How much of the skin is covered by laser?
It uses ablative fractional technology, where the small pieces of the skin are removed in a random pattern. Roughly 35 percent of the skin's surface is covered by the laser. The untouched areas speed the healing of the treated spots.
Can laser resurfacing reduce stretch marks?
Pixel laser resurfacing may reduce the appearance of stretch marks. It's important to protect skin with sunscreen following pixel laser resurfacing. Pixel laser resurfacing may be considered a viable replacement for Botox injections. Intense pulsed light photorejuvenation may be used safely with laser resurfacing.
Is sunscreen good after pixel laser?
It's important to protect skin with sunscreen following pixel laser resurfacing. Results from pixel laser resurfacing include firmer, tighter and smoother skin, and a more even complexion. The results from this type of laser resurfacing may be apparent after one treatment.
What is a pixel laser?
The Pixel Laser is a fractional ablative laser that represents the best of both worlds for skin resurfacing: it combines the proven effectiveness of an ablative approach with the patient comfort level and convenience of a non-ablative approach. The new Pixel Laser allows you to go right back to work the same or next day.
How does pixel laser work?
How Pixel Laser Works On Your Skin. A preprogrammed laser beam passes through the patented Pixel micro optics lens and penetrates the skin. It creates an ablative and thermal effect at the pixel area - a micro-injury - without disturbing the surrounding tissue.
How long does it take for epidermal skin to heal?
Typically patients can return to work the following day. New epidermal skin develops immediately, within 24 hours. This process of skin repair involves various stages. Your skin will have a bronze appearance that lasts anywhere from three to fourteen days, depending on the treatment level.
Can you use a pixel laser on your face?
The new Pixel Laser allows you to go right back to work the same or next day. The Pixel Laser can be used on the face, neck, chest, arms and hands - a much wider scope than traditional ablative technologies.
What is a Pixel8 RF?
PiXel8-RF is a minimally invasive fractional. bi-polar, Radio Frequency system that will disperse microneedles deep within the dermis to produce dramatic skin tightening and skin rejuvenation and can be used on all areas of the body.
How long does a RF microneedling treatment last?
The treated area may be red for up to 24 hours.
Does Pixcl8 use radio frequency?
Yes. Unlike laser treatments. the PiXcl8-RF uses only radio frequency energy. The micro. needles precisely deliver the RF energy into. the dermis tissue. There is virtually no thermal. damage to the epidermis and almost eliminates the risk of PIH in darker skin types.
Product Summary
Technical Specifications
- The Pixel® 2940 is a laser hand piece (see photo) which emits a 2940nm Er:YAG (Erbium Yag) ablative laser. Ablative or skin resurfacing lasers, such as carbon dioxide (CO2) and Er:YAG lasers, briefly direct an intense burst of laser energy onto the surface of the skin. This energy heats water within the surface layers of the skin, causing both the water and the tissue of the skin to turn to …
How Does It Work?
- The Pixel®’s 2940nm Er:YAG ablative laser is delivered to the skin through a micro optics lens. This creates 49 (7x7) or 81 (9x9) pixel sized ablation dots on the skin (see photo), within an 11mm x 11mm treatment zone, which each penetrate between 20 – 50 microns deep, (a micron is one millionth of a metre). The practitioner can decide between the 49 and 81 pixel configuration…
License Status
- The Pixel® 2940 was cleared by the FDA (Food & Drug Administration) for fractional ablative laser skin resurfacing in 2006 and also recieved the European CE Mark in September 2006.
What Can It Be Used to Treat?
- The Pixel® 2940 machine is used for the treatment known as skin rejuvenation, which includes; the reduction and possible removal of fine lines and wrinkles, improvement of deeper wrinkles, repair of sun damaged skin, the reduction of age spots and blemishes, acne scars and hyperpigmentation (areas of darker pigment or brown patches in the skin). Unlike traditional abl…
How Long Does It Last?
- The longevity of results is comparable to ablative laser resurfacing and as always is dependent on future ageing, the effects of gravity and sun exposure.
Side Effects & Risks
- The Pixel® 2940 machine offers speedy healing and minimal to no downtime. Treatment is generally considered to be well tolerated and almost pain free, with a light flicking or ‘elastic band’ feeling on the skin as the laser is fired, and some sensation of warmth felt during treatment. The treatment of deeper wrinkles and scars may produce more discomfort and heat effect, but your …
Treatment Regime
- Multiple treatment sessions are required with Pixel® 2940 to obtain optimal results. A treatment programme of 3 – 5 treatments, spaced 1 – 4 weeks apart is recommended by the manufacturers to achieve the best results for indications such as sun damage, acne scars, enlarged pores and rough skin texture, fine lines and pigmentation. The number of treatment sessions required depe…
Cost of Treatment
- Costs forPixel® 2940 treatment depend on the area(s) being treated and can start from approximately £300.00 per session for a full face treatment.
Clinical Results
- Courtesy of: Guilherme Olsen de Almeida, M.D. Hospital Sirio-Libanes, São Paulo, Brazil Images provided courtesy of ABC Ltd. Images provided courtesy of MediZen Ltd. All before and after photographs are real patients, your results may differ.