Our famous, award-winning Rislone Engine Treatment does just that. This product contains high quality penetrating oil, combined with protective engine additives and special cleaning agents. Its multi-grade formula allows oil to flow freely and provides protection over a broader temperature range.
How does rislone engine treatment work?
The ingredients in Rislone engine treatment are made to flow through piston rings, bearings surfaces and valve seats. The additives loosen any varnish or sludge that may have accumulated inside the engine and deposits them into the oil pan.
Is rislone a good fuel additive?
Use Rislone for general maintenance every oil change or so, quiet your loud engine idle, slowly remove sludge and to make you and your car happy. I am satisfied with Rislone and I hope that if you try Rislone that you’ll have excellent results. Believe me when I say I think a lot of fuel additives don’t do much.
What is rislone used for?
What I find it to be... Rislone is a comparable product to Lucas, STP and other additives using a sticky, honey-like base to make oil thicker.
Should I put rislone in my car?
I recommend a full bottle of Rislone in your crankcase if you’re looking to perhaps improve the performance of an old car like mine, or your new car. Use Rislone for general maintenance every oil change or so, quiet your loud engine idle, slowly remove sludge and to make you and your car happy.
Does Rislone Engine Treatment Really Work?
1:056:40Rislone Engine Treatment - Product Review (Andy's Garage - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this is pretty safe. And it's good for removing sludge and harmful deposits improving oilMoreSo this is pretty safe. And it's good for removing sludge and harmful deposits improving oil circulation for longer engine. Life quiets the noisy lifters and valves.
What does Rislone do for engines?
Rislone Engine Treatment gradually dissolves and removes harmful deposits of varnish, sludge and gum from the internal metal parts without plugging oil passages. These deposits form within engines and can alter tolerances, stick valves and rings, cause noisy valves and lifters, and plug oil screens and passages.
Does Rislone Engine Treatment contain zinc?
Rislone Engine Oil Supplement with Zinc Treatment is a petroleum oil performance supplement “booster” containing high levels of ZDDP (zinc dialkyldithiophosphate) Zinc and Phosphorus additives to help better protect internal engine components including pistons, flat tappet camshafts, lifters and the valvetrain.
Does Rislone have ZDDP?
Rislone Engine Oil Supplement with Zinc Treatment uses proven ZDDP technology along with our 90 plus years of oil additive knowledge to protect the moving parts of your engine to be used after break-in.
How long does it take for rislone to work?
How long does it take to start working? Rislone Engine Repair starts working the minute you install and start driving the vehicle. You will usually see results in about 150 km or two (2) days of driving.
Will rislone quiet lifters?
In addition to putting in new oil, there are proven additives you can add to your oil to improve performance and quiet your lifters and engines. High-quality products such as our legendary Rislone Engine Treatment serve this purpose and can significantly quiet noisy engines.
What is rislone made of?
Chemical Composition/IngredientsHydrotreated light naphthenic distillate solvent extract064742-53-625.0-50.0Zinc dialkyldithiophosphate068649-42-3<5maleic acid000110-16-7<5Dec 3, 2013
Can you add Zinc to synthetic oil?
It is compatible with all conventional and synthetic oils intended for automotive use. By adding a small 4 ounce bottle of it at every oil change, an adequate amount of Zinc and Phosphorus will continue to protect your engine.
What is Zinc oil additive?
In lubricant formulas, zinc additives typically come as an organic compound that contains zinc and phosphorus known as zinc dialkyldithiophosphate (ZDDP). This additive is a polar substance that can provide several benefits to engine oils as well as many other lubricant applications.
Is break in oil thinner than regular oil?
Our break in period is roughly 5,500 miles. Synthetic oil's lubricity is thinner than standard oil and will not allow the rings and gaskets to seat properly. If you use a synthetic the rings won't seat properly and you'll burn oil and will never get full compression.
Does Hyper lube oil work?
1:543:06What does Hy-per Lube Oil Supplement do? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich essentially reduces friction and wear and will reduce noise and noisy.MoreWhich essentially reduces friction and wear and will reduce noise and noisy.