What is the process of wastewater treatment?
ne of the most common forms of pollution control in the United States is wastewater treatment. The country has a vast system of collection sewers, pumping stations, and treatment plants. Sewers collect the wastewater from homes, businesses, and many industries, and deliver it to plants for treatment. Most treatment plants were built to clean wastewater for discharge into …
How is wastewater treated and reused?
There are three main phases of treatment undertaken in Wastewater Treatment Plants: Preliminary treatment (Pre-treatment)consists of putting the raw sewage through mechanically raked screens to break up the sewage and remove large solids, oily scums and floating material.
What are the basic components of a wastewater treatment plant?
Jun 18, 2018 · As solid material decays, it uses up oxygen, which is needed by the plants and animals living in the water. "Primary treatment" removes about 60 percent of suspended solids from wastewater. This treatment also involves aerating (stirring up) the wastewater, to put oxygen back in. Secondary treatment removes more than 90 percent of suspended solids.
What happens when wastewater reaches the treatment plant?
Oct 08, 2009 · About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators ...
How is waste water treated?
Four common ways to treat wastewater include physical water treatment, biological water treatment, chemical treatment, and sludge treatment. Let us learn about these processes in detail. In this stage, physical methods are used for cleaning the wastewater.Feb 8, 2018
How is waste water created?
Wastewater comes from ordinary living processes: bathing, toilet flushing, laundry, dishwashing, etc. It comes from residential and domestic sources. Commercial wastewater comes from non-domestic sources, such as beauty salon, taxidermy, furniture refinishing, musical instrument cleaning, or auto body repair shops.
What are the 3 stages of wastewater treatment?
There are three main stages of the wastewater treatment process, aptly known as primary, secondary and tertiary water treatment.Dec 6, 2018
What are the 5 steps of water treatment?
The 5 major unit processes include chemical coagulation, flocculation, sedimentation, filtration, and disinfection (described below). There are chemicals added to the water as it enters the various treatment processes.
What is wastewater made up of?
Domestic Sewage It can include the water that is flushed down the toilet, used in a shower, washing machine, dishwasher, through sinks, and rubbish disposal. It will often consist of organic material, hair, shampoo, bits of food, soaps, the list goes on as well as water.
Why do we treat waste water?
The major aim of wastewater treatment is to remove as much of the suspended solids as possible before the remaining water, called effluent, is discharged back to the environment. As solid material decays, it uses up oxygen, which is needed by the plants and animals living in the water.
What is denitrification in wastewater treatment?
In the context of wastewater treatment, the United Nations Environment Programme explained: Denitrification is the process whereby nitrogen is removed from water. When employed in water quality improvement technologies, denitrification treats water to reduce its nitrate-nitrogen content to potable levels.May 6, 2019
How is sewage water purified?
Most wastewater undergoes secondary treatment as well as primary treatment. The most common method is to sprinkle or trickle the water over a bed of sand or gravel. As the water filters downward, it is put into contact with oxygen and microorganisms, which work together to break down the organic matter in the water.
What are the 7 methods of water treatment?
Top 7 Methods of Water TreatmentCoagulation / Flocculation. Coagulation is adding liquid aluminum sulfate or alum and/or polymer to raw or untreated water. ... Sedimentation. When water and flocs undergo the treatment process, they go into sedimentation basins. ... Filtration. ... Disinfection. ... Sludge Drying. ... Fluoridation. ... pH Correction.Nov 7, 2015
What is first step of raw water treatment?
Coagulation. Coagulation is often the first step in water treatment. During coagulation, chemicals with a positive charge are added to the water. The positive charge neutralizes the negative charge of dirt and other dissolved particles in the water.
Why Treat Wastewater?
It's a matter of caring for our environment and for our own health. There are a lot of good reasons why keeping our water clean is an important priority:
Wastewater treatment
The major aim of wastewater treatment is to remove as much of the suspended solids as possible before the remaining water, called effluent, is discharged back to the environment. As solid material decays, it uses up oxygen, which is needed by the plants and animals living in the water.
What is the process of removing large items from the influent?
Removal of large items from the influent to prevent damage to the facility’s pumps, valves and other equipment .#N#The process of treating and reclaiming water from wastewater (any water that has been used in homes, such as flushing toilets, washing dishes, or bathing, and some water from industrial use and storm sewers) starts with the expectation that after it is treated it will be clean enough to reenter the environment.#N#The quality of the water is dictated by the Environmental Protection Agency (EPA) and the Clean Water Act, and wastewater facilities operate to specified permits by National Pollutant Discharge Elimination System (NPDES). According to the EPA, The Clean Water Act (CWA) establishes the basic structure for regulating discharges of pollutants into the waters of the United States and regulating quality standards for surface waters. Under the CWA, EPA sets wastewater standards for industry. The EPA has also developed national water quality criteria recommendations for pollutants in surface waters. EPA's National Pollutant Discharge Elimination System (NPDES) permit program controls discharges.#N#As an example of expected standards, the Biochemical Oxygen Demand (BOD) of average wastewater effluent is 200 mg/L and the effluent after treatment is expected to be >30 mg/L. It is crucial a wastewater facility meets these expectations or risk stiff penalty.#N#The physical process of wastewater treatment begins with screening out large items that have found their way into the sewer system, and if not removed, can damage pumps and impede water flow. A bar screen is usually used to remove large items from the influent and ultimately taken to a landfill.
What happens after a wastewater treatment plant meets all permit specifications?
After meeting all permit specifications, clean water is reintroduced into the environment. Although testing is continuous throughout the wastewater treatment process to ensure optimal water flow, clarification and aeration, final testing is done to make sure the effluent leaving the plant meets permit specifications.
Why is wastewater pumped into a secondary clarifier?
Treated wastewater is pumped into a secondary clarifier to allow any remaining organic sediment to settle out of treated water flow. As the influent exits the aeration process, it flows into a secondary clarifier where, like the primary clarifier, any very small solids (or fines) sink to the bottom of the tank.
What is activated sludge?
These small solids are called activated sludge and consist mostly of active bacteria. Part of this activated sludge is returned to the aeration tank to increase the bacterial concentration, help in propagation, and accelerate the breakdown of organic material. The excess is discarded.
What is the function of an aeration tank?
The primary function of the aeration tank is to pump oxygen into the tank to encourage the breakdown of any organic material (and the growth of the bacteria), as well as ensure there is enough time for the organic material to be broken down.
Why is chlorine added to water?
Chlorine is added to kill any remaining bacteria in the contact chamber. With the enhanced concentration of bacteria as part of the aeration stage, there is a need to test the outgoing effluent for bacteria presence or absence and to disinfect the water.
What is a bar screen in wastewater treatment?
A bar screen is usually used to remove large items from ...
What is wastewater treatment?
Wastewater treatment is the process of converting wastewater into water that can be discharged back into the environment. According to the U.S. EPA, one of the most common forms of pollution control in the U.S. is wastewater treatment. The purpose of wastewater treatment is to speed up the natural processes by which water is purified.
How is wastewater formed?
Wastewater is formed by a number of activities such as bathing, washing, using the toilet, and rainwater runoff. Wastewater is essentially used water that has been affected by domestic, industrial and commercial use. Some wastewaters are more difficult to treat than others, according to the Safe Drinking Water Foundation.
What is activated sludge?
People tend to use the activated sludge process instead of trickling filters, since the activated sludge process speeds up the work of the bacteria. After the sewage leaves the settling tank in the primary stage, it is pumped into an aeration tank.
What is the primary stage of wastewater treatment?
In the primary stage, solids are allowed to settle and be removed from wastewater. The secondary stage uses biological processes to further purify wastewater. Sometimes these stages are combined, and in some cases additional treatment such as tertiary treatment and advanced wastewater treatment are used.
What is the process of removing chlorine from sedimentation tanks?
Many states now also require the removal of excess chlorine before discharge to surface waters by a process called dechlorination, according to the EPA.
What is primary treatment?
Primary Treatment. Primary treatment removes material that will either float or readily settle out by gravity. This treatment includes the physical processes of screening, comminution—the act of reducing a material to minute particles or fragments—grit removal and sedimentation. As wastewater enters a plant for treatment, it flows through a screen.
What happens if wastewater is not treated?
If wastewater is not properly treated, then the environment and human health can be negatively impacted, reported the United States Geological Survey (USGS). Among the impacts are harm to fish and wildlife populations, oxygen depletion, beach closures and other restrictions on recreational water use. Advertisement.
How is wastewater pumped?
Wastewater is pumped or carried by gravity along our sewer mains through to our wastewater treatment plants . Once it reaches the treatment plant, we begin our rigorous treatment processes. In this article we explain how we treat wastewater and where the water goes once it's treated.
What is the process of sludge being broken down into water and biosolids called?
The bacteria, in turn, breaks down the sludge into water and biosolids —this process is called anaerobic digestion. The biosolids are trucked off site to be made into fertilizer or used for agriculture. Methane gas is a primary by-product of the anaerobic digestion process.
Why is the end of a wastewater pipe important?
The end of the pipe contains small holes to ensure the wastewater is evenly dispersed into the sea. This is the most cost effective option as the process uses very little energy, instead relying on gravity to transport the water. Sunlight, oxygen and ocean currents combine to continue the wastewater treatment process.
What is aeration process?
The aeration process is a natural alternative to chemical processing. If we relied on chemicals to treat wastewater, we'd also need a process to remove them before returning the water back to the environment. When the activated sludge flocks have done their job, the water flows through to secondary sedimentation tanks.
Where does sludge go in a sedimentation tank?
Where does the sludge go? The sludge collected in the sedimentation tanks is pumped into huge tanks called ‘digesters’. These tanks are 8 meters high and go down another 8 meters into the ground. Each tank holds around 4 million litres of sludge. We heat the tanks to encourage the growth of bacteria.
What is the purpose of aeration in wastewater?
The microbes form ‘activated sludge’ flocks and feed on the organic matter remaining in the wastewater. The microbes remove contaminants and convert organic matter into carbon dioxide, nitrogen gas and more activated sludge. The aeration process is a natural alternative to chemical processing.
What happens when activated sludge flocks are done?
When the activated sludge flocks have done their job, the water flows through to secondary sedimentation tanks. This is the final stage of the wastewater treatment. We don't need to cover these tanks because by this stage, the water is clear and doesn’t smell.
What is the process of removing pollutants from water?
Another natural method is called rapid infiltration, which is a process where a basin is filled with wastewater, which has already gone through a pre-treatment. The ground acts as a filter and removes the pollutants from the water. This method is similar to what happens in a septic system.
What is tertiary wastewater treatment?
Tertiary (or advanced) treatment removes dissolved substances, such as colour, metals, organic chemicals and nutrients like phosphorus and nitrogen.
How to reduce pressure on septic system?
Following some water conservation practices can greatly reduce pressure on your septic system. For more information about conserving water, see the fact sheet about Water Consumption. Here are a few things that you can do to care for your septic system: 1 Do not use your drain or toilet as a garbage disposal; avoid putting dental floss, diapers, coffee grounds and paper towel down the drain, as they can clog up your septic system. 2 Spread your loads of laundry out over the week. When too much water is added to the septic tank, it does not have time to treat wastes, and you could be flooding your drainfield with wastewater. 3 Plant grass on your drainfield, but keep trees and shrubs away from it, because roots can clog the system and cause damage. 4 Do not drive on your drainfield, because this can compact the soil and damage the septic system components.
Why is oxygen important in wastewater treatment?
The oxygen helps the bacteria to digest the pollutants faster. The water is then taken to settling tanks where the sludge again settles, leaving the water 90 to 95 percent free of pollutants. The picture below shows the settling tanks in the Winnipeg Wastewater Treatment Plant.
What are the different levels of wastewater treatment?
There are several levels of wastewater treatment; these are primary, secondary and tertiary levels of treatment. Most municipal wastewater treatment facilities use primary and secondary levels of treatment, and some also use tertiary treatments.
What is the process of tertiary treatment?
One of the biological treatment processes is called Biological Nutrient Removal (BNR). This diagram shows the treatment steps that Saskatoon wastewater goes through. Biological Nutrient Removal Process.
What does the provincial government do?
Provincial and territorial governments generally assist municipal governments with funds to build and maintain infrastructure. Municipal governments directly oversee the wastewater treatment process, and are able to pass additional by-laws.
Stage One — Bar Screening
Stage Two — Screening
- Removal of grit by flowing the influent over/through a grit chamber. Fine grit that finds its way into the influent needs to be removed to prevent the damage of pumps and equipment downstream (or impact water flow). Too small to be screened out, this grit needs to be removed from the grit chamber. There are several types of grit chambers (horizontal, aerated or vortex) which control t…
Stage Three — Primary Clarifier
- Initial separation of solid organic matter from wastewater. Solids known as organics/sludge sink to the bottom of the tank and are pumped to a sludge digestor or sludge processing area, dried and hauled away. Proper settling rates are a key indicator for how well the clarifier is operating. Adjusting flow rate into the clarifier can help the operator adjust the settling rates and efficiency…
Stage Four — Aeration
- Air is pumped into the aeration tank/basin to encourage conversion of NH3 to NO3 and provide oxygen for bacteria to continue to propagate and grow. Once converted to NO3, the bacteria remove/strip oxygen molecules from the nitrate molecules and the nitrogen (N) is given off as N2↑ (nitrogen gas). At the heart of the wastewater treatment process is ...
Stage Five — Secondary Clarifier
- Treated wastewater is pumped into a secondary clarifier to allow any remaining organic sediment to settle out of treated water flow. As the influent exits the aeration process, it flows into a secondary clarifier where, like the primary clarifier, any very small solids (or fines) sink to the bottom of the tank. These small solids are called activated sludge and consist mostly of active …
Stage Six — Chlorination
- Chlorine is added to kill any remaining bacteria in the contact chamber. With the enhanced concentration of bacteria as part of the aeration stage, there is a need to test the outgoing effluent for bacteria presence or absence and to disinfect the water. This ensures that higher than specified concentrations of bacteria are not released into the environment. Chlorinationis the m…
Stage Seven — Water Analysis & Testing
- Testing for proper pH level, ammonia, nitrates, phosphates, dissolved oxygen, and residual chlorine levels to conform to the plant’s NPDES permit are critical to the plant’s performance. Although testingis continuous throughout the wastewater treatment process to ensure optimal water flow, clarification and aeration, final testing is done to make sure the effluent leaving the p…
Stage Eight — Effluent Disposal
- After meeting all permit specifications, clean water is reintroduced into the environment. Although testingis continuous throughout the wastewater treatment process to ensure optimal water flow, clarification and aeration, final testing is done to make sure the effluent leaving the plant meets permit specifications. Plants that don`t meet permit discharge levels are subject to fines and po…