Should you seal new pressure treated wood?
However, most pressure-treated wood should have periodic sealing against moisture, preferably every year or so. Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water.
When should you seal a new pressure treated deck?
A newly built deck that uses pressurized wood will need time to dry completely before a sealer can be applied. The chemicals used to treat the wood leave moisture behind, and depending on the climate, it can take anywhere from a few weeks to a few months until it's dry enough to seal.
What do you put on a new pressure treated deck?
ULTRAVIOLET PROTECTION If you're looking to maintain the original color of pressure-treated wood longer, you will need to not only clean your deck periodically, but also apply a water-repellent finish with an ultraviolet stabilizer. The stabilizer will not prevent eventual discoloration, but will slow the process.
What is the best thing to put on pressure treated wood?
The easiest way to protect your treated wood underground is to seal pressure-treated wood with an all-weather wood sealer. This, of which, you can apply one coat of the sealer with a pump garden sprayer. Allow about two hours for the first layer to dry and soak into the wood grain.
Should I use Thompson water seal on pressure treated wood?
Some, like Thompson's® WaterSeal® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's® WaterSeal® Waterproofing Stain, can be applied immediately to new pressure treated lumber.
How do you seal new pressure treated wood?
0:081:23Caring for Pressure Treated Lumber Decks | Thompson's WaterSealYouTubeStart of suggested clipEnd of suggested clipIf you're building a new deck with pressure treated lumber use hot-dip galvanized stainless steel orMoreIf you're building a new deck with pressure treated lumber use hot-dip galvanized stainless steel or coated fasteners.
How do you stain pressure treated wood for the first time?
You need to sand the pressure treated wood's surface and apply latex primer before painting. But in staining pressure treated lumber, you only need to clean the wood with soap and water. After the lumber has air dried, you can apply the stain.
How do I stain my new deck for the first time?
Stain New Deck 1-2 Months after Install.Not the most common approach but can be done if you prep properly.Apply a wood deck cleaner and thoroughly scrub and or pressure wash lightly. Neutralize with a wood deck brightener. ... Apply a deck stain that is "thin" in viscosity.
How long should you wait before sealing pressure treated wood?
The new rule of thumb is 30 days, but your project could be ready in less time depending on factors like weather conditions and how long the material was in the lumber yard before you purchased it. The best course of action is to test the surface yourself. Splash some water on the deck boards.
Can you stain green pressure treated wood?
Yes, it's ok to stain pressure-treated wood, but you'll want to wait until the wood is completely dry.
What happens if you don't stain pressure treated wood?
Pressure-treated wood is a porous material. Without stain, any type of paint or sealant, rainwater, dew or snow can easily penetrate the decking. The wood will then swell until it dries when it will shrink again.
Should I stain pressure treated wood?
So, even though the wood is treated, it is best to apply a stain--or at least a water repellent--as soon as your project is dry enough. The first tip for working with pressure-treated lumber is to let it dry before using it.