Full Answer
How long does a pixel laser treatment session last?
A Pixel laser treatment session lasts anywhere from 30 minutes to two hours, depending on the size of the treated area. Afterward, your provider will apply an ointment and bandage your skin, which may look raw and be mildly oozing. Follow their instructions on how to care for your skin during healing.
What is the recovery time for pixel CO2 laser treatment?
Unlike other lasers within the same category, the Pixel CO2 laser does not require patients to undergo a lengthy recovery period. Most ablative skin resurfacing treatments require up to 3 weeks of recovery time, whereas with a Pixel treatment, patients can return to most normal activity within 1 week.
Can pixel perfect be performed on all skin types?
Yes, Pixel Perfect can be performed on all skin types; however, it is a good idea to consult with your physician, as some skin conditions can interfere with proper treatment. How long will it take?
How many treatments do I need with pixel® 2940?
Multiple treatment sessions are required with Pixel® 2940 to obtain optimal results. A treatment programme of 3 – 5 treatments, spaced 1 – 4 weeks apart is recommended by the manufacturers to achieve the best results for indications such as sun damage, acne scars, enlarged pores and rough skin texture, fine lines and pigmentation.
How often can you do Pixel laser?
While one Pixel Laser Resurfacing treatment will show noticeable results, optimal results are achieved with a series of treatments. Generally we recommend 3 treatments at 3-4 week intervals although this amount is dependent on the condition of your skin.
How long does Pixel laser take to heal?
For facial pixel treatments, the area is usually healed after about 5 days. For pixel treatments elsewhere on the body, healing can take longer because the skin turns over more slowly and not as many oil glands are present. It is important to keep your skin moisturized and safe from sun exposure.
How long does Pixel treatment last?
It leaves the surrounding skin cells intact to serve as a reservoir for rapid healing. The laser stimulates new collagen growth to smooth and tighten the skin. You will continue to make new collagen for 6 months after a Pixel treatment.
How do you make a Pixel laser heal faster?
We recommend Biafine, Aquaphor, Dermatix or Cetaphil lotion. These creams aid in the healing process of your skin by locking in moisture, reducing the chance of any bacterial infection, soothe, and reduce redness and irritation. These products can be used 2-6 times per day, as needed.
Does Pixel laser really work?
Pixel skin resurfacing treatments are effective at improving skin texture and signs of aging. The treatment is relatively painless, thanks to a numbing cream that's applied in advance. Recovery time can be significantly shorter than you'd experience with ablative laser treatments.
Which is better Fraxel or Pixel?
Fraxel Laser: Fraxel lasers are CO2 lasers that deliver more heat to skin tissue. This results in greater collagen stimulation for a more dramatic improvement. Pixel Laser: Pixel lasers are Erbium lasers, which penetrate skin tissue less deeply than a Fraxel laser.
Is Pixel laser good for acne scars?
i-Pixel is a particularly effective laser treatment for individuals with scars from acne, as well as active acne, enlarged pores, rough skin textures, hyperpigmentation and photo damaged skin, fine lines, wrinkles, and stretch marks. This treatment can be performed on any skin type.
What happens after CO2 laser resurfacing?
You'll have some redness and swelling. You may also experience itching or stinging for a few days after the procedure. Depending on the treatment, some people may have what looks like a severe sunburn. The skin will be raw, oozing and may even blister.
Is laser better than Microneedling?
Laser treatments can often provide quicker, more dramatic and long lasting results than microneedling treatments. Because lasers deliver heat to the skin we see more side effects (such as temporary darkening or bruising) and longer downtime due to post-treatment swelling and redness.
Can I use Vitamin C after laser?
Do not use anything abrasive over the treatment area for 3-5 days. Avoid heat – hot tubs, saunas, etc. for 3-5 days. If treating the face continue to avoid skin irritants or sensitizing agents (such as retinol, tretinoin, glycolic or, salicylic acid, benzoyl peroxide, astringents and Vitamin C) 3-5 days post-treatment.
How long does laser resurfacing results last?
On average, most patients get to enjoy silky-smooth skin that lasts for anywhere between three and five years after undergoing laser therapy. Many patients maintain treatments by returning every so often for a touch-up or supplementary skin treatment.
Can I use hyaluronic acid after laser treatment?
Skincare After Several Days A lotion with hyaluronic acid is often ideal during this period. Hyaluronic acid helps your skin cells hold and regulate moisture, keeping your skin appearing hydrated and plump. Makeup can cover any persistent redness, but only if your skin is no longer peeling.
What is a Pixel laser treatment?
The Pixel laser is an FDA-cleared in-office skin-rejuvenation treatment. It uses fractional resurfacing to refresh sun-damaged skin and reduce the...
What are the pros and cons of Pixel laser treatment?
ProsPixel skin resurfacing treatments are effective at improving skin texture and signs of aging. The treatment is relatively painless, thanks to a...
How much does the Pixel laser cost?
The price you pay for your Pixel laser treatment will depend on your provider's level of experience, their practice location, and how many treatmen...
What happens during a Pixel laser treatment?
Before the procedure begins, your doctor will cleanse your skin and numb the area with a local anesthetic or numbing cream. You’ll put on goggles t...
How long does it take to heal from Pixel laser?
Recovery from a Pixel laser treatment can take one to two weeks, less than half of the recovery time expected with a typical ablative laser treatme...
Does Pixel skin resurfacing work?
Pixel skin resurfacing works to even out skin texture, tone, and pigmentation. "You will see initial results in seven days and, as long as the trea...
Does Pixel skin resurfacing help with stretch marks?
It can, but it's not usually the best option. For new stretch marks that look red or purple, a pulsed dye laser should be considered as a first-lin...
Pixel laser vs. Fraxel laser: What’s the difference?
Fraxel is another brand of ablative fractional resurfacing laser that uses intense, focused light to treat sun damage, reduce wrinkles, and improve...
What is pixel laser?
What is the Pixel laser? The Pixel laser is an FDA-cleared in-office skin-rejuvenation treatment. It uses fractional resurfacing to refresh sun-damaged skin and reduce the appearance of acne scars, large pore size, age spots, and uneven skin tone. Pixel laser resurfacing also tightens skin, smoothing out fine lines and wrinkles.
Why should I avoid Pixel?
People with very dark skin ( Fitzpatrick skin type VI) should avoid Pixel because of the risk of hyperpigmentation.
What is the best laser for acne scars?
Fraxel is another brand of ablative fractional resurfacing laser that uses intense, focused light to treat sun damage, reduce wrinkles, and improve the appearance of acne scarring.
How long does it take to recover from a laser?
Recovery from a Pixel laser treatment can take one to two weeks, less than half of the recovery time expected with a typical ablative laser treatment (which removes the entire surface of the skin).
How long does a laser treatment last?
A Pixel laser treatment session lasts anywhere from 30 minutes to two hours, depending on the size of the treated area.
How to treat redness on face?
You can use ice packs to ease swelling, take over-the-counter pain relievers, and moisturize the treated area. If your skin crusts, apply more moisturizer. “Always cover the treated area with moisturizer, to decrease healing time and the extent of redness,” says Dr. Gary Motykie, a plastic surgeon in West Hollywood, California.
What do you put on your eyes before a cataract surgery?
Before the procedure begins, your doctor will cleanse your skin and numb the area with a local anesthetic or numbing cream. You’ll put on goggles to protect your eyes.
Dramatically Revitalize Your Skin
Now there’s a brand new way to reverse the signs of aging and ensure your inner radiance shines through. It’s called Pixel Perfect™, and it can dramatically revitalize your skin.
Treatment FAQs
Your face is an important part of who you are. Learn more about what happens with Pixel Perfect™ treatments, here.
Testimonials
Dr Hoffman and his entire staff were very friendly and informative. They are easy to talk to and very caring. They spent alot of time with me, answered all my questions and made me feel very comfortable...
How Does Pixel Perfect Work?
Pixel Perfect works by creating thousands of microscopic perforations, but the skin around each of these perforations remains intact. This allows your skin’s top layer to heal from the edge of these tiny holes very rapidly, which significantly improves your complexion.
Great Results, Faster Healing
The Pixel® technology in Pixel Perfect™ represents an evolved solution for skin rejuvenation, compared to earlier laser skin resurfacing techniques that involved more traumatic side effects.
Am I a good Pixel Perfect candidate?
Anyone whose skin shows signs of aging is a candidate for Pixel Perfect. The most dramatic results are seen on people who have tried non-invasive therapies and are looking for something more aggressive. The best candidates have moderate sun damage, are in good health, have good health habits and typically take good care of their skin.
Does Pixel Perfect work on all skin types?
Yes, Pixel Perfect can be performed on all skin types; however, it is a good idea to consult with your physician, as some skin conditions can interfere with proper treatment.
How long will it take?
Pixel skin rejuvenation treatments usually take less than 30 minutes, but could be longer if your condition is more advanced. Your exact treatment regimen will depend on your individual condition.
Is it safe?
Pixel Perfect treatments are safe and effective, without injections or surgery. You can expect your skin to be flushed and red after the treatment, but this is completely normal and short-lived. As long as you carefully follow your post-treatment instructions, this will be the limit of the difficulties you might experience.
Will it hurt?
How much the procedure hurts varies from person to person. In general, the procedure can feel similar to a sunburn. Your doctor may prescribe an over-the-counter pain medicine to make you more comfortable. The sunburn sensation is likely to continue after the treatment.
What happens after pixel laser treatment?
Dermatology provider can discuss with you. Following a Pixel laser treatment session, patients may experience varying degrees of redness over the next day or two. Unlike chemical peels, Pixel aftercare does not include messing with bandages, ointments or confining yourself to your home until your skin doesn’t look ravaged anymore. Right after a session, you can return to your usual activities without dealing with pain, itching or risk of infection. At the most, patients have the warm sensation that comes with a light sunburn, which can be alleviated by using special creams provided by Mayoral Dermatology.
What is pixel perfect?
Pixel Perfect™. To restore your skin’s natural tone, diminish the appearance of age spots and other discolorations and smooth fines lines and wrinkles, Pixel laser resurfacing is a quick method for eliminating a variety of skin imperfections that can add years to your appearance.
How many times does a laser go over skin?
The dermatologist will typically pass the laser over skin zones three times to remove the skin’s outer layers responsible for creating the visibility of wrinkles, scars and discolorations. As heat energy enters the skin, collagen production is stimulated as well as release of new, fresh skin cells. Another benefit of Pixel laser therapy is ...
What is a fractional laser?
Fractional lasers emit laser beams that are split microscopically before touching the skin. This produces the extremely small “pixel” treatment areas that are also called MTZs, or “micro-thermal zones”. The dermatologist will typically pass the laser over skin zones three times to remove the skin’s outer layers responsible for creating ...
Why do people still use pixel lasers?
Even after having a surgical face-lift, people still seek Pixel laser treatment because their skin retains discolorations, textural unevenness and scarring from acne or keloids that cannot be removed by invasive cosmetic procedures .
What is a Pixel laser?
As a newer type of resurfacing device, Pixel laser is a “non-ablative” laser treatment capable of minimizing laxity or sagging of the neck, eyelids and jawline as well as enhancing the overall quality of the skin.
Why is pixel laser resurfacing called pixel laser?
Pixel laser resurfacing is aptly named because it treats very tiny, “pixel” sized areas of the skin while leaving skin and tissue surrounding the zone untouched . In fact, this is the secret behind the efficacy of Pixel technology–the intact skin contains a reservoir of chemicals that promotes collagen production and rapid healing ...
Can anyone suggest a frugal way to correct I-Pixel skin damage?
I had RF pixel and I pixel around my eyes a month ago. The former disrupted my filler and has caused patches of broken capillaries, crepey skin, and extremely dry. Ive had to get fillers redone 2x since to correct and am so upset. I am not comfortable and feel filler is pushing these spots out.
After pixel, the lady put pads of water on to my face. Does this not counteract the benefits of it?
this is my third session - and was with a different lady but same clinic - usually I'm red for a few days and a bit of discomfort but nothing that I can't handle. This time straight after she put pads of water on my face - next day my face is nearly back to normal and this was higher then last time.
Are there any ways to reverse the effects of hyperpigmentation due to iPixel laser?
16 days post treatment each day I seem to be developing darker pigmentation around my mouth area.. I had slight pigmentation before but now its darker.
How Long Should I Wait After Pixel and a Photofacial Before Getting Botox and Juvederm?
I had microdermabrasion, IPL and pixel last Thursday. It is Monday and my skin looks good/mostly healed. Is it ok to get Botox and a filler this week?
Post treatment of pixel laser treatment?
hi doctor i have done pixel laser treatment before one month my open pores appeared again and large didn't reduce and now my dark spots appear more brighter,can you help me?
Extremely swollen after RX Pixel, normal?
Hey there, I just had the RF Pixel two days ago and look sooo swollen and like a burn victim. Im moisturizing and following protocol but is this normal?? My under eyes are very puffy and I dont see much grid work as I do like almost mosquito bite bumps all over. Just hoping this is to be expected? Thank you.
White patch (like vitiligo) 4 days after AFT, clearlift, and pixel lasers. What can be done to treat this?
It resembled a brown, scabbed burn which I treated with neosporin until day 4 when it appeared white! Is this hypopigmentation? The lasers were performed for a huge boil in between the eyebrows shown at the bottom of the photo however the white vitiligo type spot appeared above the boil.
How long does it take for a pixel to work?
Most ablative skin resurfacing treatments require up to 3 weeks of recovery time, whereas with a Pixel treatment, patients can return to most normal activity within 1 week. While many patients will see improvement in their skin concerns after 1 treatment, a series of up to 4 treatments may be needed for optimal results.
How to recover from pixel laser?
Recovery following a Pixel CO2 laser skin resurfacing treatment consists of keeping the skin moisturized during the healing process. Patients will be instructed to use a thick ointment such as petroleum jelly or Aquaphor as needed to keep the skin hydrated. Do not peel or pick at any flaking skin. Once the skin has peeled, apply a sunscreen daily. Skin may be pink or red for several days.
What is a Pixel CO2 laser?
The Pixel CO2 laser is an ablative, fractional skin resurfacing device that improves the appearance of scars, skin discolorations, fine lines, and other imperfections. Here is a quick guide for what to expect before, during, and after a Pixel CO2 laser treatment. Previous.
What is a fractional laser?
Fractional lasers direct laser energy into precise columns for targeted treatment as opposed to non-fractional lasers which treat an overall area. The Pixel CO2 laser is an ablative, fractional laser. Unlike other lasers within the same category, the Pixel CO2 laser does not require patients to undergo a lengthy recovery period.
How long does it take for pixel CO2 to show results?
The results of a Pixel CO2 procedure will not be immediately visible following the treatment, but will evolve over a few weeks as skin heals. A few sessions may be required to achieve desired results. Patients should reduce excessive sun exposure and wear sunscreen during recovery to mitigate the risk of irregular patchy skin pigmentation. Age related changes and sun damage will become evident as patients continue to age.
How long does it take to get a laser face treatment?
Typically, full face treatment can be completed in less than 15 minutes. Patients will likely experience a sunburned sensation as well as redness in the treated area.
How long does it take for a syringe to heal?
1-7 Days After Treatment and Beyond 1 Keep skin moisturized 2 Avoid sun exposure 3 Do not pick or peel any flaking skin 4 Skin may be pink or red 5 Most patients resume normal activity within 1 week
How long does it take for pixel laser to heal?
Depending on the aggressiveness of treatment, skin can remain red and tender for several days following a Pixel laser session. Patients should apply a gentle non-irritating moisturizer as needed to encourage healing.
What is the best serum for skin after a laser?
Vitamin-C Serum. After skin has completely healed, patients are encouraged to maintain results with a prescription-strength Vitamin C serum, according to the Dermotique Skin and Laser Clinic.
Can you get sensitive after pixel laser?
Warning. Skin can be sensitive following Pixel laser treatment. Patients should avoid harsh cleaners and products and refrain from picking or scrubbing at dry skin patches, which can lead to scarring. 00:00. 00:00 00:00.
Does pixel laser work?
Pixel laser treatments effectively treat aged or damaged skin. However, to get the full benefits of a Pixel treatment, proper aftercare is crucial. Before your treatment, ask your skincare specialist for instructions about how best to care for post-Pixel skin and what to expect in the coming days.
Product Summary
Technical Specifications
- The Pixel® 2940 is a laser hand piece (see photo) which emits a 2940nm Er:YAG (Erbium Yag) ablative laser. Ablative or skin resurfacing lasers, such as carbon dioxide (CO2) and Er:YAG lasers, briefly direct an intense burst of laser energy onto the surface of the skin. This energy heats water within the surface layers of the skin, causing both the water and the tissue of the skin to turn to …
How Does It Work?
- The Pixel®’s 2940nm Er:YAG ablative laser is delivered to the skin through a micro optics lens. This creates 49 (7x7) or 81 (9x9) pixel sized ablation dots on the skin (see photo), within an 11mm x 11mm treatment zone, which each penetrate between 20 – 50 microns deep, (a micron is one millionth of a metre). The practitioner can decide between the 49 and 81 pixel configuration…
License Status
- The Pixel® 2940 was cleared by the FDA (Food & Drug Administration) for fractional ablative laser skin resurfacing in 2006 and also recieved the European CE Mark in September 2006.
What Can It Be Used to Treat?
- The Pixel® 2940 machine is used for the treatment known as skin rejuvenation, which includes; the reduction and possible removal of fine lines and wrinkles, improvement of deeper wrinkles, repair of sun damaged skin, the reduction of age spots and blemishes, acne scars and hyperpigmentation (areas of darker pigment or brown patches in the skin). Unlike traditional abl…
How Long Does It Last?
- The longevity of results is comparable to ablative laser resurfacing and as always is dependent on future ageing, the effects of gravity and sun exposure.
Side Effects & Risks
- The Pixel® 2940 machine offers speedy healing and minimal to no downtime. Treatment is generally considered to be well tolerated and almost pain free, with a light flicking or ‘elastic band’ feeling on the skin as the laser is fired, and some sensation of warmth felt during treatment. The treatment of deeper wrinkles and scars may produce more discomfort and heat effect, but your …
Cost of Treatment
- Costs forPixel® 2940 treatment depend on the area(s) being treated and can start from approximately £300.00 per session for a full face treatment.
Clinical Results
- Courtesy of: Guilherme Olsen de Almeida, M.D. Hospital Sirio-Libanes, São Paulo, Brazil Images provided courtesy of ABC Ltd. Images provided courtesy of MediZen Ltd. All before and after photographs are real patients, your results may differ.