how to replace ultraviolet water treatment

How to Replace a UV Water Treatment Lamp.

• Turn off the water supply and close all faucets.
• Press the pressure button to release the pressure from the cartridges.
• Unplug the power. There may be an alarm that goes off as a warning.
• Cool System. Check to make sure the UV system is not too warm. You may want to allow the system to cool down for 10 minutes.
• Carefully remove safety cap or protective cover (at the top of the UV system) by squeezing the tabs, but make sure the VU lamp plug wires remain ...
• Remove the lamp plug, but make sure the strain relief wires remain connected.

Full Answer

How to install an ultraviolet water treatment system?

How to Replace a UV Water Treatment Lamp. Turn off the water supply and close all faucets. Press the pressure button to release the pressure from the cartridges. Unplug the power. There may be an alarm that goes off as a warning. Cool System. Check to make sure the UV system is not too warm. You may ...

How does ultraviolet water treatment work?

Nov 14, 2014 · Replacement UV Bulbs, Quartz Sleeves, and UV/Sleeve Combos can be found on our website here: https://www.uswatersystems.com/parts/ultraviolet-parts-and-acces...

How does ultraviolet water purification work?

2. Clean Your UV Quartz Sleeve Annually (and replace sleeve every 2 years) Water running through a UV system often carries minerals, sediment, and other debris. These contaminants will eventually build up on the UV quartz sleeve that protects the UV lamp. This build up will cloud the sleeve and inhibit the UV light from penetrating the water – allowing microorganisms to pass …

How does ultraviolet light disinfect water?

Feb 07, 2015 · When you’re investing in water filtration for your family, you need to know, what’s available to solve your concern, how it works, how to install & …

How do I change my UV light in my water system?

How often should you change your UV light in a water system?

Do UV lights need to be replaced?

How do I change a UV sterilizer bulb?

How long does a UV water filter last?

How much does a UV water system cost?

How can you tell if your UV light is working?

How do I know if my UV light is still good?

When should I change my pond UV light?

How long do UV sterilizer bulbs last?

How do I reset my UV light?

How much does UV light cost?

Why is it important to maintain a UV water filter?

The most important aspect of maintaining a UV water filter system is changing the lamp regularly. A UV Lamp is the heart of the UV sterilizer system and it needs to be well maintained to ensure the UV system can keep harmful viruses and bacteria out of your water.

What happens when water runs through a UV light?

Water running through a UV system often carries minerals, sediment, and other debris. These contaminants will eventually build up on the UV quartz sleeve that protects the UV lamp. This build up will cloud the sleeve and inhibit the UV light from penetrating the water – allowing microorganisms to pass by without being killed.

How often should UV light bulbs be cleaned?

If a UV system does not have a sensor, it is best to follow the manufacturer’s recommendation for cleaning and replacement – usually every one (1) year for the lamp replacement and sleeve cleaning; every two (2) years for sleeve replacement .

What does a UV sensor do?

These sensors provide a warning signal when the UV dose is too low to provide adequate disinfection and indicate when it is time to clean the quartz sleeve and/or replace the UV lamp.

How long does it take for a UV lamp to burn out?

This point is reached usually after one year, or 9000 hours, of continuous use.

What is a LOC on a UV light?

However, if the power goes out, many UV manufacturers have created Lamp-Out-Circuits (called “LOCs”) that notify the user of a power failure. Options include audible alarms to notify the user by sound, and solenoid valves that will shut off the water flow automatically. Each of these options relate to a valve that is ‘normally open’ or ‘normally closed’ (as noted by ‘NO’ or ‘NC’). To install an audible alarm, you would need a unit listed as LOC NO, and for a solenoid valve you would need a unit that features LOC NC. For any additional questions, give us a call at 877-377-9876.

How often should you test water for bacteria?

Because of this, water should be tested for bacteria every six (6) months (recommended) or at least yearly.

Why is UV light important for disinfection?

UV Dosage. UV dosage is the most critical function of UV disinfection, because the extent of inactivation is proportional to the dose applied to the water. As individual UV lamps emit a set amount of ultraviolet energy, it is important that a system be sized correctly.

What is BIO-UV?

There is a wide range of applications for the water disinfection using the UV technology, BIO-UV Group offers solutions for both professionals and individuals. For instance, you can treat surface water, residual water, pool water, industrial process water, drinking water, etc….

How many coliforms are in a UV disinfectant?

There is also a limit to the number of bacteria that can be treated. An upper limit for UV disinfection is 1,000 total coliform/100 mL water or 100 fecal coliform/100 mL. Special Considerations. Prefiltration is required to remove color, turbidity, and particles that shield microorganisms from the UV source.

What are the three types of UV radiation?

UV Types Comparison. Principles of UV Disinfection . UV radiation has three wavelength zones: UV-A, UV-B, and UV-C, and it is this last region, the shortwave UV-C, that has germicidal properties for disinfection. A low-pressure mercury arc lamp resembling a fluorescent lamp produces the UV light in the range of 254 manometers (nm).

What is UV dose?

The effective UV dose, expressed in mJ/cm² (millijoules per square centimeter), refers to the necessary UV energy that the micro-organisms (bacteria, viruses, algae in suspension…) must absorb before being destroyed. When this UV dose is reached, the UV-C rays penetrate the micro-organisms’ DNA and eradicate 99,9% of them.#N#The UV dose is a result of an equation between:#N#• the flow rate#N#• the UV exposure time (depending on the device’s design)#N#• the UV-C power emitted by the lamp#N#Other parameters must to be taking into account while calculating the UV dose and notably, the UV transmittance measured as a percentage. It is the UV rays ease to go through water; the easier they are going through, the higher the percentage is.#N#Thanks to our expertise, we are able to offer optimum UV disinfection solutions even with low UV transmittance. (Learn more about BIO-UV Group’s expertise)

Why use quartz sleeve for UV light?

For maximum UV transmission a “hard glass” quartz sleeve is recommended for two main reasons. It isolates the lamp from the water to offer more uniform operating temperatures and allows for higher UV output into the water.

How does UV radiation affect microorganisms?

UV radiation affects microorganisms by altering the DNA in the cells and impeding reproduction. UV treatment does not remove organisms from the water, it merely inactivates them. The effectiveness of this process is related to exposure time and lamp intensity as well as general water quality parameters.

How Do UV Water Treatment Systems Work?

Incorporating UV water treatment systems into your company’s water purification system can help kill microorganisms in your water supply and make it safe for ingesting or clean for industrial use.

What Contaminants Will UV Systems Remove From Water?

The ultraviolet wavelengths from the UV water treatment system will target and impact the microorganisms in the water, but they will not remove them. A UV water system does not include a filter to remove large particles, debris and any other floating substances in the water.

What Does a UV System Consist of?

Most standard UV systems have at least two pre-filters and a UV light inside of what’s called a bulb sleeve. The pre-filters will remove debris, as UV water treatment is less effective when these solids are present. The UV bulb sleeve is located in a tube, and the water disperses through the tube and around the sleeve.

Benefits of UV Disinfection Water Treatment

When you incorporate a UV water treatment system into your company’s water supply, you’re using one of the most effective methods for disinfecting water, further improving the quality of water at your facility. The system will eradicate bacteria, viruses and pathogens that are harmful to humans if ingested.

Challenges to Consider With Ultraviolet Water Treatment Systems

While companies can experience numerous benefits from installing a UV water treatment system in their facility, it’s important to consider the challenges that others have experienced with industrial UV water treatment systems.

What Kind of UV Light Does My System Need?

An ultraviolet sterilization system needs to provide an intensity or “fluence” strong enough to inactivate the harmful organisms found in raw water. The fluence is a combination of the strength of the light, the distance the light travels through the water and the speed at which the water travels past the light.

UV System Applications

The design and effectiveness of ultraviolet treatment systems make them appealing to various industries and applications. There are numerous industries that can benefit from using ultraviolet light, including:

What is UV water treatment?

The use of ultraviolet water treatment systems is common in residential, commercial and industrial applications, as well as in sewage treatment plants. UV is also an effective tool in pond algae control. UV can be used in: homes, cottages, hotels, motels, buildings, factories, rinse processes, bottling plants, food processing, cooling towers, breweries, hospitals, fisheries, farms, wineries, and the list goes on.

When should UV water treatment units be installed?

Ultraviolet water treatment units should be installed after any water pre-treatment process, just before the cold and hot branch lines. If in doubt about the size of an UV unit that is needed, always use a larger unit rather than a smaller unit. Normally, an 8gpm UV unit will be installed as close as possible to the dispensing point. All the pipes should be treated with chemical shock treatment and flushed thoroughly before an UV unit is commissioned and prior to its use.

What are the advantages of UV disinfection?

UV has many advantages over other disinfection processes: 1 UV is effective and quick. No need for holding tanks and reaction times. No need for storing chemicals. 2 UV does not alter the taste of water, which makes it ideal for use in bottling plants and food processing applications. 3 UV is safe. NO need to add or handle hazardous chemicals or risk polluting the environment. 4 UV is compatible with all other water treatment processes. No need for de-chlorination if using RO systems. In fact, UV enhances the use of other water treatment by keeping them free from germs. 5 UV is economical. Almost always, the cost of UV disinfection units is much less than the cost of chemical treatment systems. The cost of service and maintenance of UV units is very low. The electrical running cost of an UV unit in a house is about that of a regular light bulb. 6 UV is more effective against viruses than chlorine. 7 Easy installation. UV units are very easy to install and require very little space.

What is UV in water?

What is UV? UV is Ultraviolet radiation, an energy band within the electromagnetic energy spectrum. It is a colorless, tasteless, odorless and chemical free way to ensure your water supply is safe and clear of germs and other microorganisms that can make you sick.

What are the factors that affect the effectiveness of UV disinfection?

The following factors are common obstacles that will reduce the effectiveness of UV disinfection: Particulates and sediment. These suspended solids will block the UV Rays from passing through the water. They can act as a shield, "protecting" germs from UV light.

Why is UV disinfecting so effective?

UV dis-infection is very quickly gaining ground on other conventional disinfection processes because it is effective, environmentally friendly and economical. UV does not change the taste of water and does not add anything to it. For many applications, it is the ideal choice for disinfecting water.

What temperature should UV light be used for water?

Other factors, such as water temperature, should also be considered. UV units are normally designed to operate best between two and forty degree Celsius.