The Window Frame
- Begin your painting project by pouring your thoroughly mixed paint into a bucket and dipping a quality 2"-2½" wide nylon/polyester brush into the paint. ...
- With your brush, begin painting the inside frame of the window starting at the top of the frame. ...
- Continue until the inside frame is complete. Let it dry. TIP: Reload the brush when necessary to maintain a wet edge
Full Answer
How do I paint the inside of a window?
With your brush, begin painting the inside frame of the window starting at the top of the frame. TIP: To avoid drips, tap off the excess paint against the inside wall of the bucket.
How can I make my window treatments look good?
A beautiful window treatment doesn’t need to cost a lot to look good. Combine a sophisticated fabric with a simple mini-blind to create your own Roman shade. Remove most of the slats, leaving the remaining ones evenly spaced. Sew a lining to the back of your fabric of choice, then glue it to the mini-blind. 13. Cheap and Cheerful DIY Valance
What are window treatments?
Window treatments are an incredibly quick and easy way to update your décor in any room and are notoriously simple and forgiving DIY home projects.
How to remove paint from old window trim?
THE IMPORTANCE OF PREP 1 First, scrape away any peeling paint. Go over the old window trim thoroughly with a paint scraper like Hyde Tools’ Black & Silver 6-in-1 Paint Scraper, because any remaining loose ... 2 Remove hardened caulking. ... 3 Wipe down the trim. ... 4 Sand trim smooth. ...
How to cut paint off of window pane?
Cut along the outer edge of the Mini Guide with the 9mm Snap-Off Blade Utility Knife. (Choosing a utility knife with snap-off blades ensures that you will always have a super-sharp blade to make the cleanest cut.) The cut line you make now will provide a clear, crisp, and straight line toward which you can scrape away the excess paint.
How to smooth out a painted trim?
Sand trim smooth. No matter the type of trim, if it’s been painted once before, start with a 150-grit sandpaper to smooth away any edges where that old layer of paint flaked to reveal the bare surface. Then, switch to 220-grit sandpaper to fine-tune the surface. If you’re painting unfinished new trim, use only the 220-grit sandpaper to scuff the trim enough for the paint to adhere.
How to remove old caulking from a seam?
Made from high-impact plastic, this hand tool is designed so you can remove old caulk with one end and apply fresh caulk with the other. Start with the beveled blades to quickly shave away old caulking from the sides of a seam; the sharp point can dig stubborn caulking out of corners. Wipe down the trim.
What to use to clean wood trim?
On interior wood and MDF, as well as vinyl trim, use a household degreasing cleaner. On exterior wood , choose a cleaner that contains a mildewcide to protect the wood against potential mold and mildew growth from exposure to moisture. On metal trim , work with a rust-removing cleanser. Sand trim smooth.
What is window trim made of?
Window trim can be made from wood, vinyl, aluminum, or steel , and there’s no single coating that works with all. If you start with just any old can of paint, you could risk seeing the results of all your hard work flake off within the year.
How hot does it have to be to paint exterior trim?
Check the weather forecast and choose a day when the temperatures will stay between 50 and 80 degrees Fahrenheit. Hotter than that, and the paint can dry too quickly, which can affect the quality of the finish.
What size paintbrush do I need for trim?
Brushes in the Mini Master Series run from 1½ to 2½ inches in width —the perfect size for painting trim. Plus, this line is suitable for use with all types of paint, and the brushes’ soft-grip handles make them easy to hold.
Step 1: Prep Curtains
Start with a solid, lined curtain panel. If needed, iron out any wrinkles before painting curtains. Lay the panel over a drop cloth on a flat surface.
Step 2: Measure Stripes
Measure your desired stripe widths and mark with a pencil. Rather than just marking at the edge of one panel, measure and make several marks across the length of the curtain panel to help you apply the painters tape straight.
Step 3: Mark with Tape
Apply painters tape across the width of the curtain panel, smoothing out the fabric as you go. Check as you go along to make sure the tape is straight. Press down the edges of the tape to ensure no paint seeps underneath.
Step 4: Prep for Paint
Working in sections, lightly spray a stripe area with water. This will help the paint glide on and soak in for better coverage.
Step 5: Paint Stripes
Swirl paint onto the fabric using a brush. Paint away from the tape edge for a clean line. Repeat for each stripe. If desired, apply a second coat.
Step 6: Remove Tape
Peel away the painters tape. Once dry, hang your striped curtain panels, and enjoy! If you’re making a set of vertical striped curtains that will hang together, repeat the steps, checking to make sure the stripes are in alignment from one panel to the next.
