Wastewater Treatment Operators must have a degree in Science or Engineering. Certification is also required typically through state agencies. These agencies often offer training courses and study materials that help students prepare for their certification examinations.
Full Answer
How do I get a wastewater treatment plant operators license?
These licenses are issued through the Environmental Protection Division. Click HERE to link to the EPD's website for verification of Water Well Contractors, Certified Pump Contractors, and Bonded Drill Contractors. What information do I need to study for the Wastewater Treatment Plant Operators and Laboratory Analyst license exam?
How do I become a Washington State certified wastewater operator?
Otherwise, you will need to meet Washington’s requirements and pass an exam to become a Washington State Certified Wastewater Operator.
Why is the certification of wastewater treatment plant operators important?
The certification of wastewater treatment plant operators helps make sure they are knowledgeable, and that WWTPs are properly operated and maintained. I want to... Operators commonly meet their professional growth by earning 3.0 continuing education units (CEU) each professional growth cycle.
Are there state operator certification programs for drinking water operators?
Summary of State Operator Certification Programs Author U.S. EPA; OW; Office of Ground Water and Drinking Water Subject A summary of state drinking water operator certification programs. Keywords
How do I become a wastewater operator in Washington State?
To qualify for the OIT exam you need a high school diploma or GED and 3 months of operating experience. If you do not have operating experience you can substitute the operating experience with 3 months of relevant experience or 3.0 relevant credits or Continuing Education Units (CEUs).
What is a WTR operator?
Water/waste water treatment operators operate water and waste water treatment plants and equipment. Controlling the process that treats rain, ground and river water so it reaches an acceptable standard for human and industrial use.
How do I become a wastewater OIT?
OIT's must complete one full year of qualifying experience or a minimum of 1,800 hours in wastewater operations to become certified. An OIT may not supervise operators or other OITs.
What is meant by wastewater treatment plant?
A wastewater treatment plant is a facility in which a combination of various processes (e.g., physical, chemical and biological) are used to treat industrial wastewater and remove pollutants (Hreiz et al., 2015).
What do you do at water treatment plants?
Water/wastewater treatment operators run water and wastewater treatment plants. They treat water so that it is acceptable to drink. They also control the disposal of sewage and industrial wastewater.
What is OIT exam?
Exam Prep Review for Operator-in-Training (OIT): Water Treatment and Distribution (WT-11-CT): This five-day course prepares participants to write and pass the Operator-in-Training for Water Treatment and Water Distribution licensing examinations.
What is operator in training?
Operator in Training (OIT) is an optional certification for new Operators, but it is not required to become a Level I Operator. OITs require three months (500 hours) of hands-on experience or 90 hours (9.0 CEUs) of training through a directly applicable, approved course.
What is a Class D water license Oklahoma?
Class "C" Water/Wastewater Operator. Class "D" Water/Wastewater Operator.
What are the 5 stages of water treatment?
Public water systems often use a series of water treatment steps that include coagulation, flocculation, sedimentation, filtration, and disinfection.
What is the difference between water treatment and wastewater treatment?
Water treatment is done to water before it is sent to a community, while wastewater treatment is done to water that has been used by the community. Water treatment has higher standards for pollution control because it is assumed that any drop of distributed water could be consumed by a person.
What are the 3 stages of wastewater treatment?
There are three main stages of the wastewater treatment process, aptly known as primary, secondary and tertiary water treatment. In some applications, more advanced treatment is required, known as quaternary water treatment.
What is an Opcert listserv?
The OpCert program manages a listserv just for operators or wastewater treatment plant owners and public works staff. Operators can use the listserv to communicate with others across the state, as a resource toolbox, to ask questions or make announcements, and request equipment they need, or equipment they have to share.
How to request extension for ECY?
Email [email protected] to request an extension if you were approved prior to COVID-19.
Can you use a webinar to teach a course?
Yes. We're working with trainers that have approved classroom trainings to modify their courses so they can administer them via webinar or other remote learning methods.
Does OpCert have an emergency call list?
Yes, the OpCert program put together an emergency on-call list of wastewater operators who are willing to help answer questions, or may be able to help with the operations of a wastewater treatment plant, in a time of emergency.
Is there an online course for OpCert?
No, there are many approved online and correspondence courses. There are also approved WEF and PNCWA webinars. OpCert program staff will shift their priority to review online training course requests ahead of classroom training requests.
Can you proctor a Safe Start exam?
No. The exams are secure and confidential and only authorized personnel can administer or proctor the exams. We're complying with the Safe Start approach and will not travel to proctor exams until Phase 3 or 4.
Why do we certify wastewater operators?
We certify operators to help ensure that they are knowledgeable and that wastewater treatment plants are properly operated and maintained. There are four levels of full certification that are based on wastewater operating experience and education. The requirements and allowable substitutions for each level are listed in the rule ( WAC 173-230-250 ). Each level also requires passing an exam.
How do operators gain experience in wastewater treatment?
Operators gain the necessary operating experience by working as an operator under the direction or supervision of a certified operator at classified wastewater treatment plants. We classify wastewater treatment plants based on the complexity of the treatment type and quantity of flow.
How many OIT levels are there?
We also have four optional Operator in Training (OIT) Group Levels. If an operator doesn’t meet all the education and experience requirements, but believe they can pass the next Group Level exam, they may apply for an Operator in Training exam. The requirements and substitutions for each OIT level are listed in a different section in the rule ( WAC 173-230-260 ). We do not require an operator to earn an OIT certification to advance to the next full certification level.
How long does it take to get an OIT?
To qualify for the OIT exam you need a high school diploma or GED and 3 months of operating experience . If you do not have operating experience you can substitute the operating experience with 3 months of relevant experience or 3.0 relevant credits or Continuing Education Units (CEUs).
What is AMP in wastewater?
Applied Measurement Professionals (AMP). They administer the computer-based wastewater treatment exams. AMP has exam sites nationwide, so examinees can take the exam wherever they have a site.
Which states have conditional reciprocity?
We have conditional reciprocity with: Oregon — if certification was received by taking a standardized ABC exam. Nevada — if certification was received by taking the 2017 standardized ABC exam. Colorado — for levels A-D, not for class S. Utah — if certificate is not a restricted certificate.
What is the state water board?
The State Water Resources Control Board (State Water Board) has revised its regulations in chapter 26 of division 3 of title 23 of the California Code of Regulations, regarding wastewater treatment plant classification, operator certification, and contractor registration for the Wastewater Treatment Plant Operator Certification Program.
Is First Data under control of the State Water Resources Control Board?
First Data is not under the control of the State Water Resources Control Board (SWRCB) and the SWRCB is NOT responsible for the contents or links contained in their website.
What is a WWTP operator?
WWTP operators are the individuals responsible for operating the equipment that is used to clean and improve the quality of wastewater. Current state law requires these professionals be certified as a WWTP operator by the State of California. The Wastewater Operator Certification Program (WWOCP), at the State Water Boards is the program responsible for administering this certification program.
What is WWTP classification?
Classifications of a WWTP are issued based on the treatment processes used and the amount of wastewater the WWTP is designed to treat. The operator in charge of the plant, called the Chief Plant Operator (CPO) must hold a valid certificate at or above the level the WWTP is classified.