For Engine Fogging
- With the engine running, insert Sea Foam Spray tube (cut to shorten if needed) into intake throat (if carburetor) or directly before throttle plate opening (if fuel injection).
- Spray a series of 3 to 5 bursts, then a final direct stream while shutting off engine. For larger engines such as autos with a carburetor intake, use 6 bursts.
- After fogging the intake, allow engine to cool & remove spark plugs.
- Insert Sea Foam Spray tube to spray each cylinder cavity.
- Before re-inserting spark plugs, crank engine to rotate pistons (key turn, or rope pull for small engines). Note: Deep Creep & Sea Foam Spray are interchangeable for chamber lubrication.
Full Answer
Does sea foam motor treatment really work?
Aug 11, 2020 · Sea Foam Spray is used by inserting the included application hose and patented “HOOK TOOL” into the air intake just in front of the throttle plates in the throttle body. Then start engine and let it warm up to operating temperature. Increase idle speed to 2,000 RPM and spray the contents of the container into the engine.
Is Seafoam a good product?
For Engine Fogging With the engine running, insert Sea Foam Spray tube (cut to shorten if needed) into intake throat (if carburetor) or... Spray a series of 3 to 5 bursts, then a final direct stream while shutting off engine. For larger engines such as …
Is Seafoam better than stabil?
May 30, 2017 · Here's a quick rundown on how Sea Foam works when added to your fuel tank and crankcase oil. Covers all the basic uses and applications, plus a great intro ...
What does Seafoam do for engine?
Jun 08, 2018 · Sea Foam Motor Treatment. Posted on June 8, 2018 . Watch the video lesson, then test your knowledge by taking the quiz below. Quizzes Status. 1. Quiz: Sea Foam Motor Treatment. Post navigation. Most Viewed. Get in Gear: Preventing Transmission Slips; Smoothing Out the Shakes — How to Fix a Rough Engine Idle;
Where do you put Sea Foam Motor Treatment?
What is the best way to use Sea Foam?
- Pop the cap on the oil filler neck. You can add Sea Foam before or after an oil change.
- Pour up to 1 ounce of Sea Foam per quart of oil into the engine. We used about ½ of the bottle.
- One bottle treats up to 16 gallons of fuel. We poured in 1/2 of the bottle to make this a one-bottle job.
How do you Sea Foam a motor?
How much Sea Foam do you pour into the motor?
Do you add Sea Foam before or after gas?
How long does it take for Sea Foam to work?
Unprotected fuel exposed to oxygen will start to lose its freshness in less than 30 days. Immediately treat any fuel that may not be replenished within 30 days. For fuel storage up to two years, add 1 ounce of Sea Foam per gallon of fuel.
Should I use Sea Foam before or after oil change?
How long should you leave Sea Foam in your oil?
Can you use too much Sea Foam?
Can you put Sea Foam in a full tank of gas?
Can you use 2 cans of Sea Foam?
Is Sea Foam good for engine sludge?
What is sea foam spray?
Sea Foam Spray is a blend of cleaning and lubricating petroleum ingredients that can be used SAFELY in all types of 2 and 4 stroke gasoline engines. Especially important for modern GDI engines, it cleans critical upper engine areas where fuel cleaners can’t reach.
How long to soak a car engine?
Spray a long burst, shut off engine and allow to hot soak for 10 minutes.
How long to soak carburetor throat?
Depending on engine size, use 2 to 4 ounces sprayed in bursts to avoid engine stalling. Spray a long burst, shut off engine and allow to hot soak for 10 minutes.
How long to soak a car under engine load?
With engine turned off, re-secure the intake boot onto the throttle body and allow engine to hot soak for 10 minutes. After hot soak, start and drive the vehicle under engine load for 10 minutes or longer.
What to do after fogging intake?
After fogging the intake, allow engine to cool & remove spark plugs.
Can you spray into a mass air flow sensor?
DO NOT spray into the mass air flow sensor.
Does sea foam spray harm engines?
Sea Foam Spray does NOT contain harsh detergent or abrasive chemicals that can harm your engine or fuel system components. Help your engine run cleaner and last longer!
What is sea foam used for?
When added to an engine’s oil crankcase, Sea Foam Motor Treatment works to clean and liquefy heavier oil deposits, so the residues will drain away when the oil is changed. Sea Foam cleans internal engine parts, prevents sludge and other harmful oil formations.
How many quarts of oil in a 16 oz can of sea foam?
Most autos and light trucks have 5 or 6 quart systems. Check in your vehicle’s owner’s manual for the size of your crankcase. One 16 ounce can of Sea Foam Motor Treatment treats up to 16 quarts of oil. Add one ounce of Sea Foam Motor Treatment for every quart of oil in the crankcase.
Can you use sea foam on crankcase oil?
Brian from Sea Foam shows how easy and important it is to add Sea Foam to crankcase oil. Sea Foam works to dissolve and liquefy petroleum deposits that grow too big and sticky to drain. Use in gas or diesel oil crankcases to safely clean and quiet noisy lifters, cleans chain tensioners, actuators, VVT solenoids, oil control rings, and cleans out oil passageways. Cleaner engines last longer!
How to use seafoam in a car?
Go to the gas station and fill the vehicle's gas tank with high octane gasoline. When filling the tank, make sure that you leave enough room in the tank to add the calculated amount of Seafoam afterward. While Seafoam can technically be used with any octane gas, it is recommended that you use it with 91 octane or higher.
How to pour seafoam into vacuum hose?
Slowly pour Seafoam into the vacuum hose. Carefully pour one-third to one-half of the bottle directly into the detached hose.
How long does it take for seafoam to sink into a car?
6. Let the engine sit. As soon as you finish pouring Seafoam into the vacuum hose, turn off the engine and allow the car to sit for 10 to 30 minutes. The longer you wait, the deeper the Seafoam will sink into the engine.
What is seafoam used for?
Seafoam serves a variety of automotive purposes. You can use it to remove buildup in the engine, fuel injectors, or oil system. Make sure that you know how much to add, though, since adding too much can cause more harm than good. Steps.
How to get vacuum line to work on a car?
On most vehicles, the best option will be the vacuum line from the brake booster PCV. Since different vehicles are set up in different ways, you may need to choose a different option.
How to stop smoke in car?
1. Warm up the engine. Park the car in a well-ventilated area and start the engine. Let the engine warm to operating temperatures. You must do this while the car is in a well-ventilated area since the process will usually create a lot of smoke. Vehicles with automatic transmission should be kept in park.
Can you draw seafoam into a hose?
The manufacturer recommends against the practice of drawing Seafoam into the hose using suction.
