How Much Pool Shock Do You Need In Your Pool You need to be aware of your swimming pool’s volume. For a 10000 gallons swimming pool with no issue, the recommended is 1 lb. of pool shock. If there is a presence of visible algae, use 2 – 6 lb. of pool shock for the same volume of water.
How much shock do you put in a swimming pool?
You need to be aware of your swimming pool’s volume. For a 10000 gallons swimming pool with no issue, the recommended is 1 lb. of pool shock. If there is a presence of visible algae, use 2 – 6 lb. of pool shock for the same volume of water. For the algae, the amount of pool shock depends on the level of algae bloom in the swimming pool.
What is a shock treatment for a swimming pool?
Alongside essential sanitisers, such as chlorine and bromine, other chemical treatments provide a quick and effective 'deep clean'; these are called swimming pool shock treatments. Shock treatments are vital for maintenance routines; they effectively kill algae, bacteria, and other harmful pathogens.
What should the pH be in a pool before shock treatment?
Before you add shock treatment, you need to test your pool water and balance its levels. The pH level should be between 7.2 and 7.6, with total alkalinity being between 80 and 120 ppm. Pool water testing is easy to do using test strips or liquid test kits.
Can I return to the pool after a shock treatment?
Lithium and non-chlorine shock labels usually allow bathers to return to the pool quickly; however, you will need to check the manufacturer's instructions before doing so. Swimming pool shock treatments are an essential part of any pool owner's kit!
How much shock do I add to my pool?
Light Green or Teal Pool Water: In this case, you should double shock your swimming pool water. To double shock, you will need to add 2 pounds for every 10,000 gallons of water. For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock.
How much shock do I add?
Typically for granular shock, you'll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn't a one-size-fits-all answer.
How should shock be added to pool?
1:182:16How To SHOCK a Swimming POOL | Swim University - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's pour the shock inside the pool. So that's it all you want to do is you want to pre-dissolveMoreSo let's pour the shock inside the pool. So that's it all you want to do is you want to pre-dissolve each bag in a bucket of water that means water first then put in the shock mix it up with a stick.
How much shock should I put in my pool weekly?
You should use two pounds of shock for every 10,000 gallons of water that's in your pool. This will assure that your pool gets the right amount of chemicals to treat it properly.
Can you put too much shock in a pool?
Can you put too much shock in a pool? SKIMMER NOTES: It's unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you're safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.
How much shock do I need for a 10000 gallon pool?
The general recommendation is to use 1 pound of cal hypo shock for every 10,000 gallons of pool water, and 10 ounces of sodium hypo with around 12.5% chlorine to sanitize your pool. Make sure the pool water is at its normal level.
Do you run filter when shocking pool?
Run the filtration system While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.
How many hours should you wait to swim after shocking a pool?
24 hoursAfter Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
What time of day should I shock my pool?
eveningThe best time of day to shock your pool is in the evening. This is because the sun's rays can affect the effectiveness of the chlorine by dissolving it too quickly, before it has a chance to rid the pool of contaminants and clean the water.
How long should I run my pool pump after shocking?
It is a question a lot of pool owners have and a question that we have the answer to! A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water.
What do you do after you shock your pool?
Answer: After shocking the pool, it will need filtration and circulation. Run the pump as much as possible. Keep the filter clean (daily) until the water runs clear. Be sure to brush the pool often during this process as above-ground pools do not have drains at the bottom.
What happens if you swim in a shocked pool?
What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.
How many times should I shock my pool when opening?
about once a weekHow Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
How much shock Do I need to raise free chlorine?
roughly 10 timesThe goal of shocking your pool is to raise the free chlorine level of your pool water to roughly 10 times the combined chlorine level of your pool water.
How long after shock can I add chlorine?
24 hoursIt is critical to understand that using pool shock and algaecide together can cause bad chemical reactions if the necessary precautions are not taken. Since your chlorine levels will not return to normal right after you shock your pool, we recommend waiting at least 24 hours to add algaecide.
How long should I run my pool pump after shocking?
It is a question a lot of pool owners have and a question that we have the answer to! A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water.
How to figure out how much shock to put in pool?
You can get this in 3 different ways: 1) Call the pool company that built your pool. They should have your dimensions and volume on hand. 2) Use a pool volume calculator online.
When to add shock to pool?
Once your pool water is balanced and good to go, it’s time to add shock. Ideally, you want to wait until sundown to add shock to your swimming pool because the UV rays burn off the very chlorine you’re putting into your pool. You should leave the pool uncovered overnight to allow the shock to work, and to avoid damaging the pool cover.
How to add granules to pool?
1) Put on your safety goggles and rubber gloves. 2) Check the package for application instructions. Some Pods and granules tell us to save a step and add them directly to the pool. Remember, this is not a job for the internet. The only instructions you should follow are those you find on the package.
What happens if you swim in a pool with high chlorine?
Swimming in a pool with an extremely high chlorine level may cause skin, hair and eye irritation. But that’s why you should testing your pool water regularly to make sure chlorine levels are between 1 and 4 parts per million. We hope this was helpful!
How to check pool water balance?
To make sure your pool water is balanced, test your pool water with test strips or a test kit. If you’re using a test strip, dip it in the water about 18 inches down for two seconds, pull it out and don’t shake off the water.
Can you add too much shock to a pool?
Can I add too much shock to a swimming pool? It’s tough to add too much shock to your swimming pool. When you’re measuring the amount of shock to put in your pool, it’s okay to round up. In fact – it’s recommended. You’d have to put an excessive amount of shock in your pool to truly cause dangerous swimming conditions.
When to use shock treatment in pool?
You’ll also want to apply shock treatment when opening the pool, and closing it down for the season. On opening, after you’ve balanced it’s pH level, shocking will sanitize and oxidize the pool, restoring its clear water. On closing, pool shock is used as a disinfectant to prepare the pool for the winter months.
How to test pool water for shock?
Step 1. Test & Balance Your Water. Before you add shock treatment, you need to test your pool water and balance its levels. The pH level should be between 7.2 and 7.6, with total alkalinity being between 80 and 120 ppm. Pool water testing is easy to do using test strips or liquid test kits.
What happens when you shock a pool?
By shocking your pool, you replenish your chlorine level and oxidize chloramines (combined chlorine), which are a gaseous irritant that are hazardous for human consumption.
What does shocking mean in a pool?
Pool shocking doesn’t mean sending 5000 volts of electricity through the water (although that would be pretty cool to see). However, what it does refer to is the rebalancing of pool chlorine levels, keeping the pool water safe to swim in.
Why do you shock a pool at night?
Pool shocking is usually done at night, when the sun no longer shines on the water. This is because UV rays destroy chlorine at near warp speed. Twilight hours give the shock an extended amount of time to effectively kill everything in its path.
Why does my pool smell like chlorine?
Chloramines irritate your eyes, nasal passage, lungs, and skin. If the pool has a very strong chlorine smell to it, you know it’s time to shock.
How to find out your combined chlorine level?
To find out your combined chlorine level, test your water and subtract your free chlorine level from the total chlorine level.
