Full Answer
Where is the wastewater treatment plant in Great Falls NY?
Wastewater Treatment Plant In 1960 the City of Great Falls constructed a primary treatment plant, located at 1600 6th Street Northeast, which included sedimentation, chlorine disinfection and anaerobic digestion for solids processing.
When was Billings’ first wastewater treatment plant built?
In 1945, the first steps were taken to provide for the treatment of the City of Billings wastewater. Subsequently, a 15 million gallon per day (MGD) treatment plant was constructed, and was placed in service in 1950.
What permits does the power plant have in Montana?
The plant also holds permits issued by the Montana Department of Environmental Quality Permits for stormwater discharges, bio-solids disposal, and air emissions generated from the methane burning generator. The current rates and fees were adopted by the City Council on May 24, 2021 and became effective July 1, 2021.
Where does the effluent of the city’s wastewater treatment plant go?
The effluent of the City’s wastewater treatment plant is discharged into the Yellowstone River just downstream of the U.S. 87 E. Highway bridge.
About Wastewater Treatment
The City of Kalispell Advanced Wastewater Treatment and Biological Nutrient Removal Facility began operation in October 1992 to protect pristine Flathead Lake, the largest natural freshwater lake west of the Mississippi River.
Biological Nutrient Removal Process
The biological nutrient removal process was changed from the modified University of Cape Town to the modified Johannesburg process. In keeping with the concept of using only biological treatment, the improvements also included a biological state-of-the-art odor control system.
Recognition
The plant achieves outstanding removal of solids, nutrients and E coli, all without the use of chemicals. As a result, the plant has received:
When was the MGD plant built?
Subsequently, a 15 million gallon per day (MGD) treatment plant was constructed, and was placed in service in 1950. In the early 1970s, the treatment plant was enlarged to provide both primary and secondary treatment for an average wastewater flow of 26 MGD and a maximum flow of 40 MGD.
What happens when fats, oils, and grease enter the sewer system?
When fats, oils or grease (FOG) enter the sewer lines, it cools, solidifies and sticks to the insides of the pipes, trapping food particles and other debris . Over time, this mass continues to grow until it obstructs the flow of wastewater and causes sewage to back up.