Treatment FAQ

when can you wash your car after a fluid film treatment

by Prof. Hal Miller MD Published 3 years ago Updated 2 years ago
image

The little bit of grime and salt that the fluid film will hold is no big deal. I too give it a good pressure wash in the spring and start over in the fall, that strategy works great. Now, I must warm you. I don't know what year your truck is but Fluid film will majorly soften the black coating GM uses on their frames.

Full Answer

Can I wash my car if it has paint protection film?

Nov 15, 2017 · My plan is to spray everything in the next couple of weeks before winter, NOT do any undercarriage washing until they stop salting the roads (probably late March of next year). Once roads are clear, pressure wash everything and re-coat with a fresh application of Fluid Film.

How long does fluid film Last on a truck?

Jul 01, 2021 · Here is how you should clean your car’s tinted windows from the inside of your vehicle: Step One: Get your hands on a soft cloth and use it to brush large debris from the interior of your car’s windows. Step Two: Grab a clean sponge and dampen it with clean water. Step Three: Use the clean and damp sponge to wipe the window.

Do I need to do a full wash on my car?

Mar 23, 2016 · Heat the Fluid Film-Coated Object (FFCO) to 1,365° C (steel melts at around 1370 degrees C / 2500°F). 2. As your FFCO begins to glow/emit dense clouds of noxious black smoke, use a pressure washer to apply 29% Muriatic acid to all …

When is the best time of year to apply fluid film?

1. 7-Day Rule. You should not wash your car within seven days of getting your car treated with paint protection film. When paint protection film is installed, the job is not actually done when the tint shop says that you can pick up your car. The protection film on the car needs to “cure” or set on your vehicle.

image

Can you wash after FLUID FILM?

A standard, industrial strength pressure washer will suffice. Fluid Film can also be removed by warm water detergent wash or with a commercial-grade biodegradable cleaner. When choosing a cleaner, one formulated to remove tough grease and grime deposits is advised.

Does FLUID FILM need to dry?

No. Because Fluid Film protects with a wet, non-drying film and imbeds itself in the pores of the metal, any surface treated with Fluid Film should be wiped down with a good biodegradable cleaner before painting.

When can you wash your car after rustproofing?

We ask that you don't use soap and detergents on the vehicle for 48 hours after the treatment. The formula is not affected by rain, snow, or slush, just avoid washing for 2 days.

How long does FLUID FILM last on vehicle?

36 months
FLUID FILM® provides slick, lasting lubrication that could last up to 36 months in locks, or hinges and seat tracks under normal operating conditions.

Does rain wash off FLUID FILM?

If you get under there and pressure wash it will remove it. I drive through plenty of rain and snow and have no issues. If you want something more permanent you will pay some big $$$$$ Fluid Film IMHO is the best there is. It is similar to a soft paste wax and it protects extremely well.Mar 13, 2016

Does FLUID FILM damage rubber?

Will Fluid Film harm rubber or plastic? A. It has no adverse effect on plastic or synthetic rubber, but it may cause some swelling on natural rubber.Oct 14, 2012

How long does car undercoating take to dry?

How long does it take to dry? The standard undercoating dries to the touch in 30 minutes. It is fully dry in 24 hours. The professional grade undercoating dries to the touch in 10 minutes.

Can I drive my car after undercoating?

After you're vehicle is sprayed you can immediately drive in rain or salty snowy roads with confidence that your vehicle is already protected. You can wash it normally in a car wash or at home. You are able to do this is because the Krown rust inhibitor disperses water.

Does Krown wash off?

Doesn't washing the vehicle defeat the purpose of treating it? (Won't the product wash off?) After your vehicle is sprayed with Krown at one of our locations, your vehicle receives a wash. We are cleaning the excess product off of the windows and painted surfaces where the product is not active.

Does FLUID FILM soften undercoating?

"Fluid Film may soften some vehicle undercoatings. This includes undercoating type paints.Mar 4, 2015

How much does it cost to FLUID FILM?

Fluid Film is best applied in the fall, before winter arrives, and our rates start at $150 for small cars and go up to $200+ for large and extra large vehicles. For $150/year, you can't beat this kind of protection!

Can you wash your car with paper towels?

So, if you really wanted to wash your car, then you could. Just make sure you stay clear of your car’s windows on the inside. A quick drive through the car wash though shouldn’t cause any damage to your car’s newly applied window tint. Do not clean up using coarse materials like brown paper towels, scrubbing pads, or newspapers.

Can rain damage car windows?

The answer is no…. Since window tints are applied to the inside of cars, rain doesn’t damage your windows. However, if the weather is rainy, it extends the drying time. Just make sure that you wait enough time to roll down the windows.

Does a power washer remove FF?

Yes a power washer will remove FF along with the dirt. It is a coating that has to be maintained, touched up, or re-applied depending on how the vehicle is used and how you wash the undercarriage. There are better longer lasting products, however they are a lot more money, and a power washer will probably compromise them as well.

How long does a FF last?

I actually did read thru the entire FF thread, and it's a good read. One thing you will get out of it, is that the FF will last about 6-8 months, with normal wear/use/washing, however, many people point out that if you PRESSURE wash, then it'll come right off, and will need to be reapplied. If you regular wash with a hose/hose nozel, it'll rinse off the top layer from the FF, but it will stay put underneath the bit that stays put. And that has been my experience with it so far, is regular hose washing and it stays there, just looks kinda dirtier than usual, but protected underneath.

Can you wash a car in direct sunlight?

It makes for great entertainment, but washing your car in direct sunlight could actually result in some problems. If the sun is directly on your car, then the water you are using to wash it will evaporate quickly. That means that you could end up with water spots on your car.

How long does it take to wash a car after tinting?

1. 7-Day Rule. You should not wash your car within seven days of getting your car treated with paint protection film. When paint protection film is installed, the job is not actually done when the tint shop says that you can pick up your car. The protection film on the car needs to “cure” or set on your vehicle.

Is automatic car wash good?

Unfortunately, as tempting as it might be, an automatic car wash is not good for a vehicle that has been treated with paint protection film. I know that comes as bad news to some – but there is a silver lining. Paint protection film is such an amazing product that cleaning your car yourself is actually a little bit easier because your car has paint ...

Can you leave a car without washing?

Letting your car go too long without washing it is not a good thing. In the salty, snowy winters it is sometimes hard to keep up, but you want to make sure that you do not wait too long because the built-up salt on your car could start to impact the clear coat paint on your car, or the longevity of the paint protection film. 2.

What is paint protection film?

If that is the case, then you know that paint protection film is a thin urethane film that adheres to the painted surfaces on your vehicle. It cannot be seen by the naked eye once ...

Can you rinse undercarriage with salt?

I would wash your undercarriage with salt away and do not rinse!. Using fluid film where salt is going to collect or already collected would tend to activate the salt because it is a film that will not dry and cause wetting of the salt thus keeping it activated and defeat the purpose.

Why is fluid film used to activate salt?

Using fluid film where salt is going to collect or already collected would tend to activate the salt because it is a film that will not dry and cause wetting of the salt thus keeping it activated and defeat the purpose. Summer time after salt has been washed away would be the best idea and time for fluid film.

Can you wash a car after it has been coated?

The methods you use to wash your car after it has been treated with a coating can have a direct effect on how to coating will perform and how long it will maintain its looks and protective properties. There is a massive misconception in the general population when it comes to ceramic coatings whereby they think once they coat their car it will be ...

Should you wash a ceramic car?

Just because you have a ceramic coating on a car doesn’t mean you should clean it any less. To keep a coating performing at its optimal level, you should be washing it regularly.

How long does it take for paint to cure on a car?

In some instances, it can take several days for this chemical reaction to happen. You need to give the Coating time to fully cure on your vehicle. If you wash or otherwise agitate the surface of the paintwork, it can drastically inhibit the curing process of the product.

How to prevent paint from damaging my car?

There are several things you can do to reduce the risk of damaging your paint when cleaning your car. Use some sort of Pre-Wash Or Snow Foam before coming in contact with the paint. Use a Two Bucket Wash Method at the very least. Use a good quality Microfiber Wash Mitt. Use Grit Guards Where Possible.

Can you use Si02 shampoo on ceramic?

I always recommend some type Si02 infused shampoo for ceramic coated vehicles as these can prolong the life and performance of coatings. Not only are they pH neutral, but since they contain Si02, they will also act as a “Top Up” protective later for your ceramic coating.

Do Si02 paints have a pH?

Not only are they pH neutral, but since they contain Si02, they will also act as a “Top Up” protective later for your ceramic coating. I have used many of these in the past and I can confirm that they make a big difference to the hydrophobic of the paintwork.

Fluid Film long term problems for undercoating

The thought of winter is driving me crazy knowing what it can do to my cars. I am planning on using fluid film for the undercoating on my cars, neither has any sign of rust. I was curious to know if anyone has used this and has any problems with it. Has anyone used something else that has worked?

Re: Fluid Film long term problems for undercoating

Not sure we're your located but Krown or Rust Check are great products. I am in Southern Ontario but the amount of salt, sand and brine they use on the iced roads in the winter will make a clean car cry.

Re: Fluid Film long term problems for undercoating

I live in NH, where our winters can be a bit rough. Honestly, my 9 year old DD didn't have an ounce of rust. As a matter of fact I recently had the car on a lift, and the mechanic stated the undercarriage looked like a new car.

Re: Fluid Film long term problems for undercoating

I can't give you a definitive answer, but I've been playing around with Fluid Film a bit since I found it in spray cans at my local Lowes. I do believe it stops rust, based on a couple test areas I've tried on my DD. It must actually dissolve some of the rust, since wiping off the excess leaves rust stains on your rag.

Re: Fluid Film long term problems for undercoating

I used a can of fluid film last night and was only able to do the back of my truck (Yukon Denali). It does have a strange smell to it and definitely bubbles. I may have sprayed to much on.I tried to get everywhere I sprayed with a rag to smooth things out. I'm not really worried if I can see bubbles, I just want it protected.

Re: Fluid Film long term problems for undercoating

I use it on my trucks and it does a great job. It works best on cavities and will wear off if put on like front end parts. Collects dust. I recomend it.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9