Class C is the second level for Water System Operator licenses in Texas. In order to get your Class C license, you must meet the following education and work experience requirements described below. Education: High School diploma or GED. Work Experience: two years of work experience, one of which must be “hands-on”.
How long does it take to become a TCEQ certified wastewater operator?
Applicants with a High School diploma or GED may substitute up to two years of experience with college hours or additional TCEQ approved wastewater operator training. 32 semester hours of college or 40 additional hours of approved training for one year of work experience.
What is the wastewater treatment course?
The Wastewater Treatment course covers practical aspects of operating and maintaining wastewater treatment plants, emphasizing the use of safe practices and procedures.
What is included in the wastewater system operator certification course?
The self-paced course covers information specific to wastewater dischargers and state rules and regulations surrounding the certification of wastewater system operators. In addition to those areas mentioned, formulas discussed are reviewed and applied to specific problems related to wastewater hydraulics and pumping.
What classes do you need to become a wastewater technician?
Core Courses: Basic Wastewater Operation, Wastewater Collection, Water Utility Safety, Pump and Motor Maintenance, plus one elective course. Elective Courses: Intermediate Wastewater Laboratory, Water Utility Management, Water Utility Calculations, or Pre-treatment Facility Inspection.
How do I get TCEQ certified?
To become licensed as a public water system operator, an applicant must: complete the required course training, meet the required education, meet the required experience, complete the TCEQ application and pay the fee ($111), and pass the applicable exam (minimum score of 70 percent).
How do I apply for Texas reciprocity?
Procedures:Contact your current board and ask for an Application for Reciprocity.Complete the Application for Reciprocity and return it to your current board with the appropriate fee.Your application will be verified and sent to the IC&RC Office, then sent to your requested board.More items...
How do you get a Class C water license in Florida?
An applicant for a class C water license must pass educational and examination standards, plus work in the industry, before applying for the license. Complete a class approved by the Florida Department of Environmental Protection (FDEP) in water or wastewater treatment.
How do I become a wastewater operator in California?
To receive a certificate, you must meet the minimum experience and education requirements and pass a written test. Please refer to the Certification Requirements for a summary of the experience and education necessary for each grade. For future exam dates and information please refer to the examination schedule.
What states is a Texas LTC good in?
Texas Concealed Carry Reciprocity Map & Gun LawsAlabama.Arizona.Colorado.Florida.Indiana.Michigan.Nebraska.North Carolina.More items...•
What is an endorsement reciprocal license in Texas?
Licensure by reciprocity agreement is the process whereby an applicant for licensure as a Professional Geoscientist in Texas who is currently licensed as a Professional Geoscientist in the other jurisdiction becomes licensed under the terms of a formal reciprocity agreement between the two jurisdiction's Boards.
What is class A water?
Class A water is water designated for high-exposure uses, including: residential developments (for example, 'dual pipe' systems for toilets and garden use) irrigation where access is public and unrestricted. irrigation of edible crops intended for raw or unprocessed consumption.
How do I get a Class D water license in Florida?
All Operator Certification Program exams are administered via Computer Based Testing (CBT) through our testing vendor PSI. Once you receive an examination approval letter from the Florida Department of Environmental Protection (DEP), you may schedule online or call 855-557-0617 to schedule your exam.
What is a Class D water license Oklahoma?
Class "C" Water/Wastewater Operator. Class "D" Water/Wastewater Operator.
How long is a water treatment course?
Minimum duration: One year.
What is a T1 operator?
Definition Water Treatment Operator The state of California has five operator grades, T1-T5. A T1 certificate is the lowest grade and the T5 is the highest. Progression through the grades requires a combination of specialized training courses and plant experience.
What is a water distribution operator?
WATER DISTRIBUTION. OPERATORS. are responsible for operating and maintaining a water distribution system. WATER TREATMENT.
What is a wastewater plant operator?
wastewater-plant operator, superintendent, or foreman; wastewater-plant maintenance mechanic or instrument technician, or. laboratory analyst or technician (provided that the analyst works at a lab primarily doing analyses for water utilities, so that the analyst consults daily with wastewater-operations personnel).
What is the 30 TAC subchapter J?
30 TAC Subchapter J requires that half the total required experience for Class A, B, and C licensing must be in actual hands-on operation or maintenance of domestic (biological) wastewater-treatment facilities , such as:
Is plumbing a wastewater system?
Components on residential property normally installed or repaired by a plumber are not considered to be part of a wastewater-collection system and will not count as experience for any level of wastewater-collection licensing.
Is a Class D license renewable?
Experience in maintenance of on-site aerobic treatment units does not apply toward the requirements for wastewater operator licensing. A Class D license is renewable if it is a license to perform maintenance on on-site aerobic treatment units.
What is a class C water system operator license?
Class C is the second level for Water System Operator licenses in Texas. In order to get your Class C license, you must meet the following education and work experience requirements described below. Education: High School diploma or GED. Work Experience: two years of work experience, one of which must be “hands-on”.
How many hours of training do you need to be a water operator?
Applicants with a High School diploma or GED may substitute up to two years of experience with college hours or additional TCEQ approved water operator training. 32 semester hours of college or 40 additional hours of approved training for one year of work experience.
How many years of work experience is required for a scuba diver license?
Work Experience: two years of work experience, one of which must be “hands-on”. At least one-half of the work experience must be obtained in the specific field for the license that is requested. Acceptable Work Experience Substitute.
How many years of work experience is required for a water treatment technician?
Work Experience: three years of work experience required. Work Experience: two years of work experience required. Work Experience: one year of work experience required. Approved areas of work include installation and/or servicing water treatment appliances.
How much does it cost to get a TCEQ exam?
Submit an application and fee ($111) to the TCEQ. Once your application is approved, sign up for an exam at your local TCEQ regional office or your local computer-based testing center.
What is a class I plumbing license?
Class I: Individuals who have been issued this license must work under the supervision of an individual holding a higher class license, a local plumbing inspector, or a health official that has jurisdiction where the work is performed. Work is restricted to the following activities:
What is Teex Water and Wastewater?
The TEEX Water and Wastewater Program over 75 years of experience providing basic and advanced technical training solutions to industry professionals across the State of Texas. In addition to providing basic and advanced licensing training, TEEX also delivers federally funded Critical Infrastructure Safety technical training to plant personnel. As a result of our industry expertise, many courses conducted at the Texas A&M University RELLIS campus and those hosted throughout Texas have been approved for credit and licensing by the Texas Commission on Environmental Quality. Training specialty areas covered by the TEEX Water and Wastewater Program include, landscape irrigator licensing, on-site sewage facilities, all-hazard awareness and preparedness for water utilities, backflow prevention, and customer service inspection. In addition to a traditional classroom training environment, TEEX also provides industry professionals with online training options, correspondence courses, and online licensing exam prep training.
What is Teex online training?
In addition to a traditional classroom training environment, TEEX also provides industry professionals with online training options, correspondence courses, and online licensing exam prep training.
Applications
Wastewater-Treatment-Plant Experience
- 30 TAC Subchapter J requires that half the total required experience for Class A, B, and C licensing must be in actual hands-on operation or maintenance of domestic (biological) wastewater-treatment facilities, such as: 1. wastewater-plant operator, superintendent, or foreman; 2. wastewater-plant maintenance mechanic or instrument technician, or 3....
Wastewater-Collection-System Experience
- Components on residential property normally installed or repaired by a plumber are not considered to be part of a wastewater-collection system and will not count as experience for any level of wast...
- Experience must be in actual wastewater-collection-system operation or maintenance duties, such as:
- Components on residential property normally installed or repaired by a plumber are not considered to be part of a wastewater-collection system and will not count as experience for any level of wast...
- Experience must be in actual wastewater-collection-system operation or maintenance duties, such as:
- Credit for experience not directly connected with collection-system operation or maintenance will be approved at a rate of 50 percent if the experience involves tasks that are similar to those requ...
Industrial Wastewater Experience
- A separate industrial wastewater operator’s license is not available at this time. However, if work experience is gained operating a wastewater-treatment system at an industry with a large plant incorporating biological wastewater treatment, that experience will count towards wastewater-treatment-plant experience (for Class A, B, and C licenses). Industrial pretreatment where limite…
Experience Maintaining On-Site Aerobic Treatment Units
- Experience in maintenance of on-site aerobic treatment units does not apply toward the requirements for wastewater operator licensing. A Class D license is renewable if it is a license to perform maintenance on on-site aerobic treatment units. Return to top
Other Applicable Experience
- Full-time water-utility personnel who have both water and wastewater duties in approximately equal amounts will be credited with 100 percent of their time of employment as applicable toward wastewater-operator licensing. Persons whose duties primarily involve potable water distribution or treatment with occasional wastewater-collection-system or treatment-plant duties will be cre…
For More Information
- For questions about experience qualifications, contact the Wastewater Operator Licensing Program in Austin at 512-239-6133, fax 512-239-6272, or write to us at: Texas Commission on Environmental Quality Permitting and Registration Support Division Wastewater Operator Licensing Program, MC 178 P.O. Box 13087 Austin, TX 78711-3087 Return to top