What are the steps involved in water treatment?
Secondary Wastewater treatment is the second stage of wastewater treatment. In primary treatment, suspended solids, colloidal particles, oil, and grease are removed. In secondary treatment, biological treatment is done on the wastewater to remove the organic matter present.
What is the second stage of wastewater treatment?
What is the second step of raw water treatment? A. sedimentation. B. coagulation. C. filtration. D. chlorination
What happens during the third stage of water treatment?
Water Treatment Process The first step is coagulation, which involves adding chemicals to the water. That causes small particles to adhere to... The second step is called flocculation, in which larger particles called flocc form after coagulation. …
What is the conventional method to treat water?
Jan 10, 2017 · The second step in a conventional water treatment system is filtration, which removes particulate matter from water by forcing the water to pass through porous media. The filtration system consists of filters with varying sizes of pores, and is often made up of sand, gravel and charcoal.
What is the most widely used water treatment technology?
Many water treatment plants use a combination of coagulation, sedimentation, filtration and disinfection to provide clean, safe drinking water to the public. Worldwide, a combination of coagulation, sedimentation and filtration is the most widely applied water treatment technology, and has been used since the early 20th century.
Why is coagulation important in water treatment?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
What is added to ferric chloride?
If ferric chloride is used, iron and chloride are added. And if aluminum sulphate is used, aluminum and sulphate are added. The majority of municipal water treatment plants use aluminum sulphate as the coagulation chemical. Generally, water treatment facilities have the coagulation process set up so that the coagulant chemicals are removed with ...
What is residual water?
Residuals are the by-products that remain in the water after substances are added and reactions occur within the water. The particular residuals depend on the coagulant that is used. If ferric sulphate is used, iron and sulphate are added to the water. If ferric chloride is used, iron and chloride are added.
What is the charge of ferric sulphate?
ferric sulphate, ferric chloride or polymers, to the water. These chemicals are called coagulants, and have a positive charge. The positive charge of the coagulant neutralizes the negative charge of dissolved and suspended particles in the water.
What is slow sand filtration?
that are used. Slow sand filtration removes bacteria, protozoa and viruses, and produces. essentially clean water, though it is still advisable to use a disinfectant as a precautionary. measure.
How fast does sand flow?
In fact, during rapid sand filtration, the water flows at a rate up to 20 metres per hour.
How does a water treatment unit work?
Even though EPA regulates and sets standards for public drinking water, many Americans use a home water treatment unit to: 1 Remove specific contaminants 2 Take extra precautions because a household member has a compromised immune system 3 Improve the taste of drinking water
What is the process of boiled water?
Distillation is a process in which impure water is boiled and the steam is collected and condensed in a separate container, leaving many of the solid contaminants behind. Disinfection. Disinfection is a physical or chemical process in which pathogenic microorganisms are deactivated or killed.
What are the steps of water treatment?
Today, the most common steps in water treatment used by community water systems (mainly surface water treatment) include: Coagulation and flocculation are often the first steps in water treatment. Chemicals with a positive charge are added to the water.
What is a CCR report?
Every community water supplier must provide an annual report, sometimes called a Consumer Confidence Report, or “CCR,” to its customers. The report provides information on your local drinking water quality, including the water’s source, contaminants found in the water, and how consumers can get involved in protecting drinking water.
Why is surface water more contaminated than ground water?
Typically, surface water requires more treatment and filtration than ground water because lakes, rivers, and streams contain more sediment and pollutants and are more likely to be contaminated than ground water. Some water supplies may also contain disinfections by-products, inorganic chemicals, organic chemicals, and radionuclides.
What is a water softener?
Water Softeners. A water softener is a device that reduces the hardness of the water. A water softener typically uses sodium or potassium ions to replace calcium and magnesium ions, the ions that create “hardness.”. Distillation Systems.
What is the most common type of water treatment system?
The most common types of household water treatment systems consist of: Filtration Systems. A water filter is a device which removes impurities from water by means of a physical barrier, chemical, and/or biological process. Water Softeners. A water softener is a device that reduces the hardness of the water.
Why is floc filtration necessary?
Filtration is necessary due to the small, dissolved particles that are still present in clear water, which include dust, parasites, chemicals, viruses, and bacteria.
Why is sedimentation more effective?
Coagulation makes the sedimentation process more effective because it makes the particles larger and heavier, causing them to sink more quickly . For a community water supply, the sedimentation process must happen continuously and in large sedimentation basins.
What happens to the particles after coagulation?
After coagulation, a gentle mixing known as flocculation occurs, causing microflocs to collide with each other and bond together to form visible suspended particles.
What is the charge of a coagulant?
In coagulation, positively charged chemicals such as aluminum sulphate, polyaluminum chloride or ferric sulphate are introduced to the water to neutralize the negative charges held by solids, including dirt, clay, and dissolved organic particles. After neutralizing the charge, slightly larger particles called microflocs are formed from the binding of smaller particles with the added chemicals.
What is slow sand filtration?
Commonly used materials include sand, gravel, and charcoal. Slow sand filtration has been used for more than 150 years, with a successful record for removing bacteria that causes gastrointestinal disorders. Slow sand filtration combines biological, physical, and chemical processes in a single step.
What are the risks of drinking water?
Drinking water has the potential to be contaminated at its source as well as within the water distribution system. The EPA is responsible for regulating the quality of the drinking water in the U.S. and sets the maximum allowable levels for concentrations of various contaminants. Some of these are chemicals, organisms and pollutants that lead to dangerous health effects such as neurological disorders, gastrointestinal illness, reproductive issues, and increased risks for illness in people with compromised immune systems. The Centers for Disease Control and Prevention (CDC) ranked the top 10 contaminants in water systems that cause health issues: 1 Giardia 2 Legionella 3 Norovirus 4 Shigella 5 Compylobacter 6 Copper 7 Salmonella 8 Hepatitis A 9 Cryptosporidium 10 E.coli and excess fluoride (tied)
What is the main effect of disinfection?
The main effect of the disinfection process is to oxidize and eliminate organic matter, which prevents the spread of parasites, viruses, and bacteria that may remain in the drinking water.
What causes floc to form in water?
Treatment plant workers add alum and other chemicals to the water, which cause tiny sticky particles, or floc, to form. These floc attract dirt particles, making them eventually heavy enough to sink to the bottom of the water storage tank.
Why is water purification important?
Water purification plays a key role in ensuring access to safe drinking water. Safe drinking water positively impacts the health of the entire community. Systems are in place to ensure ongoing water quality, including water quality testing. The testing helps ensure the water treatment process results in a product that meets federal water quality ...
What is the process of disinfecting water?
Chlorine or other disinfecting chemicals kill any remaining microorganisms or bacteria in the water and help keep the water clean until distribution. If a water treatment facility uses ground water as its only water source, disinfection may be the only step required to sufficiently treat the water. After it is disinfected, the purified water sits in the closed tank or reservoir until it flows through pipes to homes and businesses.
How deep is the gravel layer in the ocean?
Water passes through layers of gravel, sand and perhaps charcoal, which serve to filter out any remaining particles. The gravel layer is often about 1 foot deep and the sand layer about 2½ feet deep.
How deep is the sand layer in a water filter?
The gravel layer is often about 1 foot deep and the sand layer about 2½ feet deep.
What is the purpose of a water screen?
When the water source is a lake or river, the screen serves an important function, keeping out large natural contaminants such as plants and wood, or fish.
Who is Ann Wolters?
Ann Wolters has been a writer, consultant and writing coach since 2008. Her work has appeared in "The Saint Paul Almanac" and in magazines such as "Inventing Tomorrow" and "Frontiers." She earned a Master of Arts in English as a second language from the University of Minnesota.
Community Water Treatment
Water Fluoridation
- Community water fluoridation prevents tooth decay safely and effectively. Water fluoridation has been named one of 10 great public health achievements of the 20th century 1. For more information on the fluoridation process and to find details on your water system’s fluoridation, visit CDC’s Community Water Fluoridationpage. Top of Page
Consumer Confidence Reports
- Every community water supplier must provide an annual report, sometimes called a Consumer Confidence Report, or “CCR,” to its customers. The report provides information on your local drinking water quality, including the water’s source, contaminants found in the water, and how consumers can get involved in protecting drinking water. 1. View the CDC’s guide to Understandi…
Household Water Treatment
- Even though EPA regulates and sets standards for public drinking water, many Americans use a home water treatment unit to: 1. Remove specific contaminants 2. Take extra precautions because a household member has a compromised immune system 3. Improve the taste of drinking water Household water treatment systems are composed of two categories: point...