Full Answer
What is the price per cubic yard of concrete?
Local ready-mix concrete suppliers can give you quotes once you define the project specifications and provide the job location. Concrete pricing is typically quoted per cubic yard or cubic meter (metre). For an average estimating number, you can use $77 per cubic yard.
How much does a ton of concrete cost?
When crushed concrete is charged by the ton, the rate can be anywhere from $6 to $14 per ton. By the yard, crushed concrete can cost anywhere from $20 to $35. Typically, the more you purchase, the lower that rate will be per ton or yard. You might also like our articles about the cost of a ton of sand, gravel, and building a house.
What is the average cost of cement?
Concrete costs $125 per yard on average, with most people spending between $100 and $200 per yard. You’ll pay less for a full 10-yard load vs. a short load since overhead remains constant. Pricing factors include the type of concrete, additives and the type of cement used. The national average cost for concrete is $5,011, with a typical range ...
How much does it cost to build a concrete slab?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How much does a 20x20 concrete patio cost?
between $1,200 to $6,000A 20-foot by 20-foot concrete patio runs between $1,200 to $6,000, including labor and materials. Adding decorative finishes and colors could make the price even higher.
How much does it cost to finish cement?
Finish work can cost between $4 and $18 per square foot. Standard slab finishing may cost between $4 and $8 dollars per square foot. Meanwhile, a property owner may want a border, colored, stenciled, or textured, stamped concrete slab. These kinds of finishes may cost $8 to $12 per square foot.
How much does a 10x10 concrete patio cost?
To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944.
How much does it cost to pour a 20x20 concrete slab?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How much does it cost per square foot to stain concrete?
The cost of stained concrete can vary greatly. For a basic application of a single stain color with sealer and minimal surface prep, most decorative concrete contractors charge between $2 and $4 per square foot. As the complexity of the job rises, so will the price.
Is stained concrete cheaper than tile?
Cost of Polished Concrete vs. According to Concrete Network, the average ceramic tile flooring costs between $11-$22 per sqft, and natural stone can coast as much as $20-$50 per sqft. New installation of stained and polished concrete can cost between $2-$15 per square foot.
How much does a 20x20 paver patio cost?
A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.
How much does it cost to pour a 10x12 concrete slab?
Cost of concrete per square footSlab SizeSquare FeetAverage Cost10x10100$60010x12120$72010x20200$1,20012x12144$86418 more rows•Jun 12, 2022
Which is cheaper a concrete patio or pavers?
Concrete costs between $6 and $12 per square foot, installed. On the other hand, pavers typically cost $8 to $25 per square foot, including installation. For some high-end pavers, you can pay as much as $50 per square foot.
How much does it cost to pour a 40x60 concrete slab?
How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That's based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.
How much does it cost to pour a 24x30 slab of concrete?
A 24×30-foot slab covers 720 square feet. With an average price of $6 per square foot, you may pay about $4,320 for a slab foundation. However, the price can range from $4 to $8 per square foot, resulting in a total cost between $2,880 and $5,760.
How do you calculate concrete jobs?
CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•