Question 1 : Both temporary and permanent hardness of water can be removed by Question 2 : Coliform bacteria in water is an indication of the presence of Question 5 : When temporary hard water is boiled, one of the substances formed is Question 6 : Zeolite softening process removes both temporary and permanent hardness of water.
Full Answer
What are the questions and answers for water treatment?
15 service connections or over 25 persons for over 60 days a year. B. 25 homes or more for over 120 days a year. C. The public in any capacity, no matter how small. D. 25 or more persons for at least 30 days a year. Question 3. The filters in the treatment plant …
Is this test similar to the actual water treatment exam?
This 5 question practice test is a demo of the full, 100 question, practice test available to members. The full practice test is randomly generated from a database of hundreds of questions, meaning no two test are ever exactly the same. This test is designed to simulate the actual Water Treatment exam as closely as possible. These questions are similar to, but not the same as, …
How many questions are there in the sample quiz?
treatment quizzes. This 5 question practice test is a demo of the full, 100 question, practice test available to members. The full practice test is randomly generated from a database of hundreds of questions, meaning no two test are ever exactly the same. This test is designed to simulate the actual WaterTreatment exam as closely as possible.
Which is a physical process used in wastewater treatment?
These practice tests are a great study tool to add to your Water Treatment Operator Exam studying process. Every test is created from a pool of possible water treatment exam questions. So every time you practice you will take a unique test. Perfect for water treatment operators taking their Water Treatment Operator Exam I-III (T1-T3).
Which pH range is generally accepted as most palatable?
The U.S. Environmental Protection Agency recommends that the pH level of water sources should be at a pH measurement level between 6.5 to 8.5 on a scale that ranges from 0 to 14. The best pH of drinking water sits right in the middle at a 7.Jun 16, 2020
What is the primary responsibility of a water treatment plant?
Water treatment plant and system operators run the equipment, control the processes, and monitor the plants that treat water to make it safe to drink. Wastewater treatment plant and system operators remove pollutants from domestic and industrial waste.
Which of the following is associated with thick billows of white sudsy foam in the aeration tank?
Remember that thick billows of white sudsy foam in the aeration tank is associated with a high F/M ratio and young sludge.
What is the water treatment system?
Public drinking water systems use different water treatment methods to provide safe drinking water for their communities. Public water systems often use a series of water treatment steps that include coagulation, flocculation, sedimentation, filtration, and disinfection.
What is sludge from water treatment?
Approximately 99% of the wastewater stream that enters a treatment plant is discharged as rejuvenated water. The remainder is a dilute suspension of solids that has been captured by the treatment process. These wastewater treatment solids are commonly referred to as sewage sludge.Sep 15, 2010
What are the roles and responsibilities of water treatment and water distribution operators?
Inspecting operations and making necessary adjustments to equipment. Performing routine maintenance and minor repairs. Collecting samples for analysis. Chlorinating new or repaired distribution pipes.
What causes white foam in aeration tank?
Foaming is the distribution of gas bubbles in the liquid. The gas bubbles are necessary to establish the foam. Air in the aeration unit, nitrogen gas that is produced during denitrification in anaerobic conditions, methane and carbon dioxide that is produced in anaerobic digesters may cause foaming in units (Hug 2006).Sep 1, 2015
How do you reduce foam in water?
0:001:49Reducing Foam In A Wastewater Treatment Plant - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs a water gets cold metabolism of the naturally occurring bacteria is slowed down as they slow downMoreAs a water gets cold metabolism of the naturally occurring bacteria is slowed down as they slow down fats oils. And grease is only broken down partially in fatty acids.
How do I stop my anaerobic digester from foaming?
is no problem with anaerobic foaming, foam is collapsing at the same rate as it is forming. ▶ Generally speaking, this can be prevented by removing solids from a digester. generally caused by poor mixing. biogas to escape from solids and surfactants which greatly stabilizes foaming.
What are 3 different methods of water treatment?
Four Common Water Treatment Methods:Reverse Osmosis Water Filtration. Reverse Osmosis is a process where water pressure is employed to force water through a semi-permeable membrane. ... Ultraviolet Water Sterilization and Filtration. ... Filtration. ... Distillation.
What are the four basic principles for water treatment?
What are the four basic principles for water treatment? Coagulation, flocculation, sedimentation – elimination of turbidity and colloid substances.Nov 25, 2021
What are the 3 stages of water treatment?
There are three main stages of the wastewater treatment process, aptly known as primary, secondary and tertiary water treatment. In some applications, more advanced treatment is required, known as quaternary water treatment.Dec 6, 2018