Both community and household water treatment systems follow the same water treatment process. The only difference is the scale of the systems that are used by communities and households. Introduction to HWTS Step 1 – Water source protection Step 2 – Sedimentation Step 3 – Filtration Step 4 – Disinfection Step 5 – Safe water storage
Do you know the 5 stages of water treatment?
So, knowing the 5 stages of water treatment is of the utmost importance. As water enters a water treatment plant, either from lakes, rivers, or the ground, it passes through a screening. This screening keeps large natural contaminants out of the water.
What are the objectives of the water treatment process?
Some of the main objectives of the water treatment process are: 1. To reduce the impurities to a certain level that does not cause harm to human health. 2. To reduce the objectionable colour, odour, turbidity and hardness.
What are the 4 steps of community water treatment?
4 Steps of Community Water Treatment. 1 1. Coagulation and Flocculation. In coagulation, positively charged chemicals such as aluminum sulphate, polyaluminum chloride or ferric sulphate are ... 2 2. Sedimentation. 3 3. Filtration. 4 4. Disinfection.
How do I start studying water treatment steps?
Start studying Water Treatment Steps. Learn vocabulary, terms, and more with flashcards, games, and other study tools. Search Create Log inSign up Log inSign up Water Treatment Steps STUDY Flashcards Learn Write Spell Test PLAY Match Gravity Created by jordanlipkind_ Terms in this set (7) First Step First Filtration - Screens remove large solids
What is the process of reducing turbidity in water?
Step 2 – Sedimentation Sedimentation is a physical treatment process used to reduce the turbidity of the water. Remember that turbid water looks cloudy, dirty, or muddy and is caused by sand, silt, and clay that are floating in the water.
What are the three chemicals used to clean water?
Three common chemicals used as ways to clean water and aid in sedimentation are aluminum sulphate, polyaluminum chloride (also known as or liquid alum) and ferric sulphate. Native plants are traditionally used in some countries in Africa and Latin America to help with sedimentation.
How does sedimentation work?
The sedimentation process can be quickened by adding special chemicals or native plants, also known as coagulants, to the water. Coagulants help the sand, silt and clay join together and form larger clumps, making it easier for them to settle to the bottom of the container.
What is the second stage of sedimentation?
2. Sedimentation. The second stage takes place when the suspended matter and pathogens settle at the bottom of a container. The longer the water sits undisturbed, the more solids will succumb to gravity and fall to the container floor.
How many people get their water from the water system?
According to the Environmental Protection Agency (EPA), 286 million people get their drinking water from a community water system. To make water safe for public consumption, it undergoes a series of treatments and tests on its journey from source to tap. Let’s explore some of the risks associated with drinking contaminated water, ...
Why is floc filtration necessary?
Filtration is necessary due to the small, dissolved particles that are still present in clear water, which include dust, parasites, chemicals, viruses, and bacteria.
Why is sedimentation more effective?
Coagulation makes the sedimentation process more effective because it makes the particles larger and heavier, causing them to sink more quickly . For a community water supply, the sedimentation process must happen continuously and in large sedimentation basins.
What happens to the particles after coagulation?
After coagulation, a gentle mixing known as flocculation occurs, causing microflocs to collide with each other and bond together to form visible suspended particles.
What is slow sand filtration?
Commonly used materials include sand, gravel, and charcoal. Slow sand filtration has been used for more than 150 years, with a successful record for removing bacteria that causes gastrointestinal disorders. Slow sand filtration combines biological, physical, and chemical processes in a single step.
What are the risks of drinking water?
Drinking water has the potential to be contaminated at its source as well as within the water distribution system. The EPA is responsible for regulating the quality of the drinking water in the U.S. and sets the maximum allowable levels for concentrations of various contaminants. Some of these are chemicals, organisms and pollutants that lead to dangerous health effects such as neurological disorders, gastrointestinal illness, reproductive issues, and increased risks for illness in people with compromised immune systems. The Centers for Disease Control and Prevention (CDC) ranked the top 10 contaminants in water systems that cause health issues: 1 Giardia 2 Legionella 3 Norovirus 4 Shigella 5 Compylobacter 6 Copper 7 Salmonella 8 Hepatitis A 9 Cryptosporidium 10 E.coli and excess fluoride (tied)
What is water treatment?
Water from any source may contain various suspended, colloidal and dissolved impurities which may be harmful or useful for drinking purpose. The process of removal of undesirable matters and pathogens from water is called the water treatment process. The degree of treatment depends upon the quality ...
What is the most widely used method of water treatment?
Among them; chlorination is the most widely used method. So, we are explaining only chlorination. Chlorination is the process of addition of chlorine to kill the bacteria. Chlorination is widely adopted in all developing countries for the treatment of water in the public water supply system.
How long does it take for particles of 0.006 mm to settle in plain sediment?
Particles of sizes 0.006 mm required 10 hours to settled in plain sedimentation. Therefore we need certain chemicals to add in the water to remove such impurities which are not removed by plain sedimentation. These chemical are known as coagulants and the process is called sedimentation with coagulation.
What is sedimentation tank?
The particles whose specific gravity is greater than that of water gets settles down under the action of gravity. Sedimentation tanks are designed to reduce the velocity of flow of water so that the suspended particles get settled under the action of gravity. Sedimentation can be achieved in two ways. 1.
What is the process of removing suspended particles by gravitational settling called?
The process of the removal of suspended particles by gravitational settling is called sedimentation. The water after screening may contain various suspended impurities like silt and clay particles. So to remove such particles sedimentation is done.
What are the objectives of water treatment?
Some of the main objectives of the water treatment process are: 1. To reduce the impurities to a certain level that does not cause harm to human health. 2. To reduce the objectionable colour, odour, turbidity and hardness. 3. To make water safe for drinking. 4.
What is the process of passing water through a bed of sand?
The process of passing water through beds of sands or gravels is known as filtration. It consists of a bed of sand supported on gravel.
Coagulation
Flocculation
- Following the coagulant chemical addition and the rapid mix processes, the raw water will continue on to a flocculation basin. The goal of the flocculation treatment process is to increase the size of the flocs in order to increase their ability to settle out.
Sedimentation
- The water continues on to the sedimentationbasin, or clarifier, after the flocs have been formed. The goal of this stage of the treatment process is to reduce the amount of solids in the water before the water is filtered in the next treatment step. The large flocs will settle out of suspension via gravity. Clarifiers can remove a very large percentage of the suspended materials in water. I…
Disinfection
- As discussed previously, the surface water treatment rule requires both the filtration and disinfection of surface water sources. The water must be disinfected now that it has been filtered.
Chlorination Operations
- Chlorination was one of the first drinking water disinfection methods. It is still the most commonly used disinfection method used today. The filtered water is injected with either liquid sodium hypochlorite, gaseous chlorine, or solid calcium hypochlorite. Chlorine is a strong oxidant. It is used to both disinfect and also to remove color, taste and odor compounds, iron and manganes…
Conclusion
- In order to meet the requirements of the Surface Water Treatment Rule, a water system must both remove and inactivate the pathogens in the water. This process begins with coagulation, which destabilizes the particles in the water. Then, during flocculation, the destabilized particles bump into each other and form larger and larger flocs. These large flocs are given adequate time to se…
I. Introduction
II. Objectives of The Water Treatment Process
- Some of the main objectives of the water treatment process are: 1. To reduce the impurities to a certain level that does not cause harm to human health. 2. To reduce the objectionable colour, odour, turbidity and hardness. 3. To make water safe for drinking. 4. To eliminate the corrosive nature of water affecting the pipe. 5. To make it suitable for a wide variety of industrial purpose…
III. Methods of The Water Treatment Process
- The water treatment process includes many operations like screening, aeration and sedimentation, sedimentation with coagulation, softening, filtration, disinfection, etc. The water treatment process generally adopted depends upon the quality of raw water and the quality of water derived. Methods of the water treatment process are explained below.
IV. The Layout of The Water Treatment Plant
- Following are the major consideration for the layout of a treatment plant: 1. The water treatment plant should be located near the distribution area to reduce the contamination in distribution. 2. All the units are arranged in a way that a minimum area is required to reduce the cost of construction. 3. All the units of plants should be located in an order of sequence flow from one u…