
THE OLAPLEX STAND ALONE TREATMENT (CONT’D) 1. Mix 1/2oz (15ml) OLAPLEX No.1 with 3oz (90ml) of water in a non-spraying applicator bottle. Take the client to the shampoo bowl and saturate thoroughly. Process for 5 minutes. Please note, if your client requires more or less product in regards to Step 1, measurements may be modi!ed.
- Mix 1/2oz (15ml) No.1 with 3oz (90ml) of water in a non-spraying applicator bottle. ...
- Without rinsing, apply a generous amount of No.2 from roots to ends and comb through thoroughly.
How do I mix Olaplex?
For short hair, mix 1/4oz (7.5ml) OLAPLEX N o. 1 with 1.5oz (45ml) water. For long hair, mix 1oz (30ml) OLAPLEX N o. 1 with 6oz (180ml) water. The shelf life of a pre- mixed bottle of OLAPLEX N o. 1 and water is 2 weeks if kept in an airtight container. We recommend applying the No.1 and water mixture to dry hair to see visible saturation.
How to use Olaplex stand alone treatment?
TRAINING MANUAL THE OLAPLEX STAND ALONE TREATMENT (CONT’D) 1. Mix1/2oz (15ml) OLAPLEX No.1 with 3oz (90ml) of water in a non-spraying applicator bottle. Take the client to the shampoo bowl and saturate thoroughly.
How do you use Olaplex No 3 hair Perfector?
This miracle worker is a great way to prep and prime the hair for the No.3 Hair Perfector. It’s the at-home version of the Olaplex No.2 Bond Perfector, which is only available to professional hair stylists. How to use: Apply No.0 to dry hair and comb through to cover the whole head.
What is the shelf life of Olaplex?
For long hair, mix 1oz (30ml) OLAPLEX No.1 with 6oz (180ml) water. The shelf life of a pre- mixed bottle of OLAPLEX No.1 and water is 2 weeks if kept in an airtight container. We recommend applying the No.1 and water mixture to dry hair to see visible saturation.

How do you use Olaplex standalone treatment?
4:006:04OLAPLEX STAND ALONE TREATMENT | Brittney GrayYouTubeStart of suggested clipEnd of suggested clipAnd just like we did with part one I'm going to grab my wet brush and then evenly distribute theMoreAnd just like we did with part one I'm going to grab my wet brush and then evenly distribute the products throughout the hair you can also use a wide tooth comb.
How much water do you mix with Olaplex No 1?
Mix 1/2oz (15ml) OLAPLEX No. 1 with 3oz (90ml) of water in a non-spraying applicator bottle. Take the client to the shampoo bowl and saturate thoroughly. Process for 5 minutes.
How do you use Olaplex 1 and 2 as a standalone treatment?
2:395:48OLAPLEX 1 & 2 TREATMENT AT HOME - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore I start with the treatment. I gave me a good wash using Elysee mega shampoo which is now myMoreBefore I start with the treatment. I gave me a good wash using Elysee mega shampoo which is now my favorite. And I think my hubby found it weird to film ey I'll wash my hair. But anyway. So now that
How do you do an Olaplex treatment at home?
The choice is yours!Step 1: Apply a generous amount to towel-dried hair and comb through.Step 2: Leave on for a minimum of 10 minutes. Keep in mind, the longer it's on, the more effective it is, especially for hair that is compromised. ... Step 3: Rinse, shampoo and condition. ... Step 4: Style as you normally would.
How do you use Olaplex step by step?
0:484:18HOW TO USE OLAPLEX & PREVENT HAIR DAMAGE - 7 | Daniella BenitaYouTubeStart of suggested clipEnd of suggested clipHere I mix 30 grams of Lightner with 1/4 ounce of olaplex.MoreHere I mix 30 grams of Lightner with 1/4 ounce of olaplex.
Can I use Olaplex 3 alone?
While No. 3 Hair Perfector can be used on its own, we do not recommend using No. 0 alone.
Does Olaplex stand alone treatment work?
Ogawa agrees: "Since Olaplex rebuilds broken hair bonds and helps keep the hair healthy and strong, there definitely are benefits." As a standalone salon treatment without color or bleach, Outen says No. 1 Bond Multiplier can be diluted with water, sprayed on hair for five minutes, layered with No.
How do you use Olaplex No 2 at home?
Here's what to do:Dispense a quarter-size amount of Olaplex No. 2 in your hands.Apply to the hair from scalp to ends.Cut the hair as normal. A haircut takes roughly 20 to 30 minutes—and during that time, Olaplex No. 2 is working its magic.Rinse, shampoo and condition with Olaplex No. 4 and Olaplex No.
How often should you have an Olaplex stand alone treatment?
Maintain your hair once-monthly with in-salon Stand-Alone Treatments™. You don't have to color your hair to reap the benefits of OLAPLEX! This hair type requires more love than untreated hair. Being that it's chemically treated, it also experiences at least one of the three types of damage mentioned above.
Do you have to mix Olaplex 1 with water?
For long hair, mix 1oz (30ml) OLAPLEX No.1 with 6oz (180ml) water. The shelf life of a pre- mixed bottle of OLAPLEX No.1 and water is 2 weeks if kept in an airtight container. We recommend applying the No. 1 and water mixture to dry hair to see visible saturation.
Can you use Olaplex 4 and 5 alone?
If you're serious about maintaining your hair post-bleach, both products can be used alongside the treatment, but can also be used on their own.
What happens if you leave Olaplex on too long?
People have used Olaplex 3 for more than 12 hours without ill effects, but that doesn't mean you can expect the same. If you leave Olaplex 3 on for longer than 90 minutes, you could experience several issues, from an irritated scalp to eye irritation, redness, and stinging.
How to use Olaplex 2?
Mix OLAPLEX No.2 and protein treatment, equal amounts, apply to highly porous damaged areas and place under dryer with no cap until hair is dry. Using a spray water bottle, remoisten the hair and wrap the Perm.
What is an Olaplex stand alone?
The OLAPLEX Stand-Alone Treatment is the unparalleled service that repairs damaged hair and maintains strong, healthy hair. It is a great service to set the stage for the OLAPLEX Family of Professional Service and Retail products. Stylists, Educators and Salespeople can create their own personal success story to share with others by getting a Stand-Alone Treatment done on themselves. It’s much easier to talk about and sell all the benefits that the OLAPLEX Stand-Alone Treatment produces when you’ve experienced it and have a personal story to tell. This service is designed to be executed at the shampoo bowl and is a great add on to any stylist’s service ticket. Compromised hair can benefit by getting Stand-Alone Treatments one to two weeks prior to any service. Once the service is done, clients can maintain their hair’s integrity at home by using OLAPLEX No.3 HAIR PERFECTOR. The Stand-Alone Treatment is highly effective on 100% Human Hair Extensions, the only precaution would be to avoid contact with the bonds (glue, track, or tape) with OLAPLEX No.2 BOND PERFECTOR as it possibly could cause the extensions to loosen.
What is Olaplex? What are its uses?
What makes OLAPLEX the worldwide phenomena that it is, is its patented active ingredient Bis-Aminopropyl Diglycol Dimaleate. It works on the hair internally to seek out and repair broken disulphide bonds caused by chemical, thermal, mechanical and environmental damage. You can use OLAPLEX to restore all hair types, regardless of the damage it has. Chemical services are taken to a whole new level when OLAPLEX is added to them, creating hair that is in better condition after the service than before. All of the products in the OLAPLEX line are Sulfate Free, Paraben Free, Phthalate Free, Color-Safe, Vegan and NEVER tested on animals!
How long should I leave Olaplex on my hair?
Rinse hair thoroughly. Towel dry and apply a generous amount of OLAPLEX No.2. Work through and leave on for a minimum of 5 minutes. Shampoo and condition! This works great prior to a haircut or blow dry as a quick introduction to OLAPLEX.
How long after keratin treatment should I use Olaplex?
It is recommended to wait two weeks after your most recent Keratin treatmentbefore repeating the OLAPLEX Stand Alone Treatment in salon or using OLAPLEX No.3HAIR PERFECTOR at home. This will allow the hair to become more porous and receiveall of the benefits that OLAPLEX has to offer.
Can you use olaplex at the backbar?
This is the second step of the In-Salon OLAPLEX System—the Stand Alone Treatment—and can be used by itself at the backbar for additional benefits to the hair . After chemical services it repairs any bonds that may have been missed during the service.
Can you use Olaplex on 100% human hair?
OLAPLEX can be used on all 100% human hair extensions. Some extensions have a Keratin coating on them which can sometimes act as a barrier to the OLAPLEX Treatment. Extensions sometimes are treated with textile dyes which can lead to unpredictable results with Color or lightening. With any type of glued in or taped in extensions, we recommend keeping OLAPLEX off those areas to avoid possibly loosening them. When in doubt, always perform a Strand Test on extensions as results may vary.
How to use Olaplex No 1?
1 treatment. If you are using the Olaplex in combination with a coloring treatment, your stylist will mix the Olaplex No. 1 solution directly into the bleach, hair dye, or powder lightener before it is applied to your hair.
What is Olaplex hair treatment?
Olaplex is a relatively new hair treatment that is being heralded as a miracle serum by hair professionals worldwide! It was scientifically formulated to reconnect broken and damaged disulphide bonds in your hair to help strengthen the strands from the inside. To use Olaplex’s 3-step process, you should start by making an appointment ...
How long does Olaplex 2 last in hair?
Your hair will be towel-dried and then Olaplex No. 2 will be applied throughout your hair. You must keep the Olaplex No. 2 in your hair for 10-20 minutes.
How long should I leave Olaplex 3 in my hair?
Let it sit for the required amount of time. Leave the Olaplex No. 3 in your hair for at least 10-30 minutes. If your hair has recently been dyed or otherwise damaged, consider leaving it in for an hour or two.
How often should I apply Olaplex?
Repeat the treatment once every 10 days . For the best results, you should keep applying Olaplex to your hair every 10 days after you're initial treatment at the salon. Reapplying the Olaplex No. 3 solution will help keep your hair smooth and healthy. EXPERT TIP. Michael Van den Abbeel.
How to get rid of a swollen scalp?
Shampoo and towel-dry your hair normally. Hop in the shower and shampoo your hair as you normally would. Soap up your hair and gently massage the shampoo into your scalp. Then rinse the shampoo out completely.
Does Olaplex help with hair?
Michael Van den Abbeel of Mosaic Hair Studio says: "Olaplex strengthens your hair from the inside out, but it doesn't necessarily replace the missing protein s or moisture to your hair. A moisturizing mask that contains protein can help restore the shine to your hair.".
How long does Olaplex treatment last?
What is it? A leave-in treatment that you can use to tame unruly locks and flyaways for a whopping 72 hours. Again, this Olaplex treatment is suitable for even coloured treated hair and helps relink any broken bonds caused by styling.
What does Olaplex do?
While other hair care brands simply smooth over the problem, the Olaplex formula actually repairs the damage using their patented single ingredient Bis-Aminopropyl Diglycol Dimaleate.
How to use Bond Building Treatment?
How to use: Start with damp hair and apply from the root to tip. Leave on the hair for at least 10 minutes. Rinse thoroughly and follow with your regular shampoo routine. Use No.3 alone or alongside the No.0 Intensive Bond Building Treatment.
How to use No.3 Hair Perfector?
How to use: Apply No. 0 to dry hair and comb through to cover the whole head. Allow to sit for 10 minutes then add the No.3 Hair Perfector on top and allow to sit for another 10 minutes. Then rinse thoroughly and follow with your shampoo and conditioner.
What is Olaplex hair mask?
What is it? The latest and greatest from Olaplex. This concentrated hair mask strengthens the hair and uses their unique formulation to repair brittle, weak and damaged locks. It’s perfect for hair that has suffered from chemical treatments and environmental damage.
What is the miracle worker for hair?
What is it? This miracle worker is a great way to prep and prime the hair for the No.3 Hair Perfector. It’s the at-home version of the Olaplex No.2 Bond Perfector, which is only available to professional hair stylists.
What breaks disulphide bonds in hair?
Basically, over styling and hair stressors can break the strong disulphide bonds in the hair. These bonds are necessary for a healthy-looking ‘do. This breakdown then creates a single sulphur hydrogen bond which can pair with three oxygen molecules.
