TriboTEX is easy to use. Simply add to your engine oil. First, warm up your engine, then shut it off. Add TriboTEX to your engine oil through the oil fill port. The smart ceramic coating forms as you drive. Please allow at least 500 miles of normal driving for the treatment to fully activate.
How do you use TriboTEX?
The coating is smart and only forms on metal bearing surfaces. TriboTEX is also non-toxic and safe. TriboTEX is easy to use. Simply add to your engine oil. First, warm up your engine, then shut it off. Add TriboTEX to your engine oil through the oil fill port. The smart ceramic coating forms as you drive.
Is TriboTEX compatible with all types of motor oil?
This product is compatible with all types of motor oil both conventional and synthetic and can be used in gas or diesel engines. TriboTEX treats all vehicles i.e. Ford F150, Toyota Camry, BMW 3 series, Dodge pickups and Chevy V8s. For motorcycles, lawn mowers and other small equipment use our small engine treatment.
How often should I use TriboTEX?
We recommend treating with TriboTEX every 40,000 miles. Proudly made and engineered in the USA. “Lubricants (engine oil) are a mixture of a base oil and additives.
What is TriboTEX coating?
The coating is smart and only forms on metal bearing surfaces. It’s like ceramic protective coatings used in some of high-performance engines, but it reduces friction 10X BETTER than engine oil alone. TriboTEX is also non-toxic, safe, and made by scientists in the USA.
How do I use TriboTEX?
All you do is:Locate your oil cap under the hood.Inject all 20 mL of the additive into your oil compartment.Drive 500 miles to feel the full effect.Apply TriboTEX again in 40,000 miles or during your 10th oil change.
How often do you use TriboTEX?
The wear and damage reversing affects of the TriboTEX DLC (diamond-like carbon) coating are evident after the treatment. We recommend treating with TriboTEX every 40,000 miles.
How do you apply super oil treatment?
Directions for Use For maximum protection, add one 15 oz. bottle of BERKEBILE 2+2® Super Oil Treatment for every 4-5 quarts of motor oil at every oil change or to fill crankcase when low between changes. For badly worn engines, add two cans. Allow engine to warm up to operating temperatures, then shut engine off.
How much oil treatment should I use?
In engines use approximately 20% or one quart to each gallon of any plain motor oil, petroleum or synthetic. In badly worn engines, use more • up to 60% or 80% if necessary. In manual transmissions and transfer cases use 25% to 50%. In differentials use 25% to 50%.
Is TriboTEX snake oil?
[The material, also called nano-flakes, is sticky on one side and smooth on the other. The sticky side is attracted to points of friction and attaches itself to those spots, leaving the smooth side facing out.
What is Tribotech?
Tribotech IJP is a patented, revolutionary approach to engine friction prevention and lubrication technology. It represents the future of lubrication.
Where do I put oil treatment?
2:2520:08How to use STP oil treatment in car or pickup truck engine or motorYouTubeStart of suggested clipEnd of suggested clipControl what is in here. And then I insert that here now I managed to open that cat. Okay and inMoreControl what is in here. And then I insert that here now I managed to open that cat. Okay and in that hole in there I will add the my treatment and theorist is my treatment.
When should I use oil treatment?
When Should I Use An Engine Oil Treatment? Use engine oil treatment when you notice irregularities in your engine, such as fuel leaks or smoke spewing from the hood. You should also treat oil if your vehicle has high mileage, if it's old (mostly), or if unusual sounds are heard from your engine.
Can oil additives hurt my engine?
Without the proper levels of these additives, you run the chance of increased wear and tear on your engine, potentially resulting in rust, corrosion, oil sludge, decreased fuel economy, breakdowns, overheating, and expensive engine damage.
How do you use an oil treatment on a car?
STP® Oil Treatment Petrol should be added to the engine oil when the engine is warm, at a rate of one 300ml can to 3 litres of oil, or one 450ml bottle to 4 or 5 litres of oil (10% treat rate).
Does oil stabilizer really work?
According to Lucas, the oil stabilizer will not only prolong the life of an engine, but it will also provide you with approximately 50% more time between oil changes.
How do you stop an oil treatment?
1:074:16Stp oil treatment isn't safe? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe. Cold oh wow unbelievable. Guys they say for modern engines it's definitely not safe. And youMoreThe. Cold oh wow unbelievable. Guys they say for modern engines it's definitely not safe. And you got to remember this is to be mixed with motor.
Tacoma Gets New Life
I drive a 96 Tacoma 4wd, 6 cylinder. It has 345,000 miles on it. In the past 2 years it has become louder, uses more gas and a quart of oil/month. It has lost a lot of power. I was ready to trade her in but decided to try this first. The results have been dramatic.
More Highway Miles
With absolute certainty, my engines are quieter. I cannot vouch for better gas mileage in the city but my higher expressway numbers are coming in much much better. Like 2-2.25 MPG better. Shame on you if you don’t try it. - Edward Harris
A Performance Boost
I have added this to both of my vehicles, 2011 BMW 335xi and 2003 BMW M3 (manual), and they both have over 100K miles. I have noticed that the 335xi does run smoother and quieter as with the M3 but I am not seeing any significant reduction in heat. I can say that I have see a slight increase in gas mileage to about 20 MPG for the city with the M3.
How to apply Tribotex?
1. Locate your oil cap under the hood. 2. Inject all 20 mL of the additive into your oil compartment. 3. Drive 500 miles to feel the full effect. 4. Apply TriboTEX again in 40,000 miles or during your 10th oil change. It takes 15 minutes to start working and 500 miles of driving to reach every corner of your engine.
How long does it take for Tribotex to work?
It takes 15 minutes to start working and 500 miles of driving to reach every corner of your engine. One regular application treats 3-8 quarts of motor oil. TriboTEX is also compatible with all engine oils, engine oil additives, and engine types.
Smart nanotechnology that treats engine wear only at the source
Before treatment this typical piston ring (see photo), a major component to the correct function of an engine, is scratched and damaged (see arrow) from 120,000 miles of highway driving. The wear and damage reversing affects of the TriboTEX DLC (diamond-like carbon) coating are evident after the treatment.
Easy to use engine boost
Add TriboTEX to your engine oil. It may be added to a warmed-up or cold engine, and is easiest to add during an oil change. The smart ceramic coating forms as you drive. Please allow at least 500 miles of normal driving to notice the full benefits of TriboTEX, but do not worry, these miles do not have to be driven all at once.
You can treat any engine
This product is compatible with all types of motor oil both conventional and synthetic and can be used in gas or diesel engines. TriboTEX treats all vehicles i.e. Ford F150, Toyota Camry, BMW 3 series, Dodge pickups and Chevy V8s. For motorcycles, lawn mowers and other small equipment use our small engine treatment.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
