how to use oleplex 1 and 2 as treatment

Full Answer

How do you use Olaplex?

To use Olaplex, start by shampooing your hair and towel-drying it thoroughly. Next, apply Olaplex No. 3 to your scalp and comb it through your hair. After 20 minutes, rinse with warm water, then shampoo and condition your hair as normal. Alternatively, use the Olaplex website to find a salon near you that offers Olaplex treatments.

Should I use more or less Olaplex for my lightener?

OLAPLEX DOES NOT REQUIRE INCREASING THE VOLUME OF DEVELOPER. Processing time of Lightener: Any issues with processing time or lift can be solved by using less OLAPLEX. OLAPLEX is not a#ected by heat. However, keep in mind that heat speeds up the chemical reaction of Lighteners.

Do you have to use Olaplex 1 and 2 together?

REMEMBER: This step is not optional. No. 1 is meant to mitigate damage during chemical services, and No. 2 finds more single sulfur hydrogen bonds and crosslinks them back together WITHOUT chemicals working against it.

How long can you leave Olaplex 1 and 2 on?

Whilst No 1 felt all runny and watery, No 2 has a completely different consistency - it's very thick and creamy, like conditioner. Once you've massaged it all throughout the hair, give it another cheeky comb through. Olaplex say to leave this on for a minimum of 10 minutes.

How do you use Olaplex 1 as a Stand-Alone Treatment?

4:006:04OLAPLEX STAND ALONE TREATMENT | Brittney GrayYouTubeStart of suggested clipEnd of suggested clipAnd just like we did with part one I'm going to grab my wet brush and then evenly distribute theMoreAnd just like we did with part one I'm going to grab my wet brush and then evenly distribute the products throughout the hair you can also use a wide tooth comb.

How often should I use Olaplex 1 and 2?

OLAPLEX is a bond builder, not a conditioning treatment or protein treatment, allowing extensive use, the minimum is once weekly. Start with two treatments a week then go from there.

Do you wash hair before Olaplex 1?

We recommend applying the No. 1 and water mixture to dry hair to see visible saturation. If client has product buildup such as oils or silicones, shampoo first with OLAPLEX No.4 BOND MAINTENANCE SHAMPOO, rinse and towel dry. Then apply to damp, towel dried hair.

Can you use Olaplex 1 as a treatment?

You may use No. 1 Bond Multiplier diluted with water as a treatment. Mix 15% 1/2oz (15ml's) of Olaplex No. 1 with 3oz (85ml's) of tap or bottled water in an applicator bottle.

How do you use Olaplex as a deep conditioning treatment?

2:069:06How To Use Olaplex No. 8 | The BEST Deep Conditioning TreatmentYouTubeStart of suggested clipEnd of suggested clipNumber eight you're going to want to make sure that you're starting your application in the mostMoreNumber eight you're going to want to make sure that you're starting your application in the most troubled or dry areas of the hair which typically is going to be on the mids. And ends.

How do you do an Olaplex treatment at home?

The choice is yours!Step 1: Apply a generous amount to towel-dried hair and comb through.Step 2: Leave on for a minimum of 10 minutes. Keep in mind, the longer it's on, the more effective it is, especially for hair that is compromised. ... Step 3: Rinse, shampoo and condition. ... Step 4: Style as you normally would.

Do you shampoo after Olaplex 2?

Step 3: Once the cut is complete, rinse and shampoo out the No. 2. It's important to remember Olaplex is by no means a conditioning treatment or a leave in– so remember to condition after shampooing based on the hair's needs (dryness, frizz, volume).

Can you leave Olaplex 2 on overnight?

As a company, we do not recommend sleeping in OLAPLEX treatments as it could get into your eyes. However, we have received great feedback from people who have used it this way.

Can Olaplex ruin your hair?

Apparently no. Olaplex cannot damage your hair, no matter how often you use it. Some users have reported that when they use it for long periods, the amount of time it requires to “take effect” will climb and climb.

What happens if you leave Olaplex on too long?

People have used Olaplex 3 for more than 12 hours without ill effects, but that doesn't mean you can expect the same. If you leave Olaplex 3 on for longer than 90 minutes, you could experience several issues, from an irritated scalp to eye irritation, redness, and stinging.

How does Olaplex work?

You can use OLAPLEX to restore compromised hair, or add it to another service to provide the ultimate breakage insurance.

How long to leave Olaplex No2 Bond Perfector?

Apply to the hair at the back wash after all processing has been completed, leave for 20 minutes and rinse to get the best out of this product.

How many steps are there in Olaplex?

The Olaplex range can be broken down into 3 categories: treat, maintain and protect, with two steps for in Salon Care. In an ideal world the way to achieve the best results would be to use the whole range on a permanent basis but we do understand that this won’t be cost effective for a lot of people.

What is the No 4 shampoo?

The only shampoo in the range, No.4 protects and repairs hair from everyday stresses such as damage, split ends and unwanted frizz. How? It uses Olaplex’s bond rebuilding technology to repair and cleanse while also imparting moisture, strength, and manageability with every wash. Colour safe and perfect on all hair types, the No.4 Bond Maintenance Shampoo is available to purchase in two sizes. Ideal for salon treatments and selling on to clients for at-home use, we advise you to concentrate on the roots when applying. If required, it can be used daily on your client’s hair.

Can you use Olaplex on your hair?

Explain that it can be added into colour, lightener, and relaxers to mitigate damage during the process. Olaplex is also entirely compatible with both perms and keratin smoothing treatments. Olaplex works on all hair types. Beyond this, the best way to talk to your clients about Olaplex is to use it on yourself.

How long does Olaplex treatment last?

What is it? A leave-in treatment that you can use to tame unruly locks and flyaways for a whopping 72 hours. Again, this Olaplex treatment is suitable for even coloured treated hair and helps relink any broken bonds caused by styling.

What does Olaplex do?

While other hair care brands simply smooth over the problem, the Olaplex formula actually repairs the damage using their patented single ingredient Bis-Aminopropyl Diglycol Dimaleate.

How to use Bond Building Treatment?

How to use: Start with damp hair and apply from the root to tip. Leave on the hair for at least 10 minutes. Rinse thoroughly and follow with your regular shampoo routine. Use No.3 alone or alongside the No.0 Intensive Bond Building Treatment.

How to use No.3 Hair Perfector?

How to use: Apply No. 0 to dry hair and comb through to cover the whole head. Allow to sit for 10 minutes then add the No.3 Hair Perfector on top and allow to sit for another 10 minutes. Then rinse thoroughly and follow with your shampoo and conditioner.

What is Olaplex hair mask?

What is it? The latest and greatest from Olaplex. This concentrated hair mask strengthens the hair and uses their unique formulation to repair brittle, weak and damaged locks. It’s perfect for hair that has suffered from chemical treatments and environmental damage.

What breaks disulphide bonds in hair?

Basically, over styling and hair stressors can break the strong disulphide bonds in the hair. These bonds are necessary for a healthy-looking ‘do. This breakdown then creates a single sulphur hydrogen bond which can pair with three oxygen molecules.

What is hair styling oil?

A hair styling oil that tames frizz, repairs damaged bonds and protects your hair from heat damage up to 450°. How to use: Use a few drops and smooth across wet or dry hair before styling with heated tools like hair dryers, straighteners or curlers.

How long does it take to use Olaplex 2?

Dispense a quarter-size amount of Olaplex No. 2 in your hands. Apply to the hair from scalp to ends. Cut the hair as normal. A haircut takes roughly 20 to 30 minutes— and during that time, Olaplex No.2 is working its magic. Rinse, shampoo and condition with Olaplex No. 4 and Olaplex No.5, then blow-dry and finish. 3.

What is Olaplex No 2?

Olaplex. 1. Offer Extra Repair While Processing. A root touch-up client can get an extra dose of hair love (and you’ll increase your ticket) with an Olaplex No.2 treatment. Here’s what you should do: Apply the root touch-up as you would normally. While she processes, dampen larger sections of hair.

How to apply Olaplex No. 2?

Before. Step 1: Start at the bowl. If the hair is clean, dampen, towel dry, and apply Olaplex No. 2. Comb through to evenly distribute the product. If the hair is dirty with buildup from product, oils, or minerals– give it a light shampoo, rinse, and towel dry.

How long does it take to style Olaplex No. 2?

That means Olaplex No. 2 sits on her clients’ hair for 30 minutes, creating stronger, healthier, more resilient hair– without the extra time it takes for a treatment.

How to make your hair feel fuller?

Try not to texturize too much as it may make already weak hair feel worse and tangle easier. Instead, take out weight by layering whenever possible. Avoid razors and thinning shears as much as possible.

Is Olaplex a good add on for color?

Which is why stylists around the globe are proving Olaplex is not just a popular add on for color– it’s so much more. Now with Olaplex, stylists are able to cut hair and rebuild broken disulfide bonds simultaneously.

How to use Olaplex?

Use 1/4oz. OLAPLEX to 2-3 small scoops. Mix your bleach powder with developer thoroughly first, then add OLAPLEX. Do not mix OLAPLEX directly into the bleach powder. After everything is mixed together, you can add more bleach powder for consistency. Processing time will take longer with OLAPLEX. Be patient.

What is the step 1 and 2 of the Olaplex system?

Steps 1 & 2 of the revolutionary, 3-step OLAPLEX professional system in a salon introductory kit. OLAPLEX lets you lighten your client’s hair to levels never thought possible before, without compromising the integrity of the hair.#N#Single Kit includes:

How much Olaplex to use for bleach?

If you add too much OLAPLEX to your lightener, hair will not lift! Do not use more than 1/4oz. OLAPLEX to 1oz. bleach powder mixed with developer. Pay careful attention to scoop size. Many powders contain 1/2oz. or 15g scoops. Use 1/4oz. OLAPLEX to 2-3 small scoops.

Does Olaplex make hair stronger?

From base color to balayage, OLAPLEX multiplies bonds making hair stronger, healthier, while color lasts longer with more vibrancy. OLAPLEX gives you the confidence, the insurance, the ability, not to be stressed out worrying if your client's hair is going to break.

Can you use Olaplex 10 volume?

Do not use 10 volume. OLAPLEX dilutes the developer like water diluting cranberry juice. You must bump it up or processing time will take forever. Never use more than 1/8oz. of OLAPLEX into lightener for balayage (halfway to 1/4oz. line on dosage dispenser).