Warm engine to normal operating temperature and add recommended dosage to ENGINE OIL. Add Cerma STM-3 Engine Treatment while the engine is running. DO NOT add to your fuel tank. If blow-by or pressurized oil system is present, shut off engine, add dosage amount, close cap and immediately restart engine. (More is Not Better - Use Only Recommended Dose)
Full Answer
What is the best transmission conditioner for automatic transmission fluid?
Cerma STM-3 Hydraulic Treatment Cerma STM-3 Hydraulic Fluid FOR BEST PERFORMANCE AND MAXIMUM OIL LIFE, FOLLOW THE CERMA PROTOCOL: 1. Add Cerma STM-3 Treatment 2. Drive 1,500 miles - the longer the better (3,000 miles for trucks) 3. Change Oil using Cerma Brand Motor Oil and Fluids Your part of the process is now complete.
Can you use Zmax fluid in automatic transmission?
In ALL cases, you will benefit from switching to Cerma Motor Oils/Fluids. The BEST way to MAINTAIN peak operating performance after treating your vehicle with a Cerma Treatment: Cerma Engine Treatment THEN Cerma Motor Oil Cerma Automatic Transmission Treatment THEN Cerma Transmission Fluid Cerma Manual Transmission Treatment THEN Cerma Gear Oil
Can you put transmission conditioner in your car without a prescription?
Cerma STM-3 Automatic Transmission Treatment utilizes ceramic technology to form a micro-ceramic protective coating on all metal parts within transmission or differential. Cerma does not allow the formation of performance degrading sludge.
What is prolong transmission treatment?
Transmission; Treatments; Automobile; Diesel Truck; Motorcycle ; Grease & Lubes; 2-Cycle Oils; A/C & Refrigeration; Purchase Gift Cards; The Technology. Cerma Engine. Benefits of Cerma STM-3; What is Cerma STM-3? Self-Cleaning Engine System Information; How Cerma STM-3 Works; The Science Behind Cerma STM-3; Savings Using Cerma STM-3 ...
How do you add transmission additive?
0:312:27How to add TRANS TUNE to an automatic transmission - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you do is pull your transmission fluid dipstick place the funnel nozzle in the filler tube andMoreAll you do is pull your transmission fluid dipstick place the funnel nozzle in the filler tube and pour. Keep in mind that there's a lot of space in a transmission. So unless your fluid is overfilled.
What's a good additive for transmission slipping?
Our pick for the best transmission additive is the Prolong Super Lubricants PSL15000. It is one of the best transmission additives on the market. It reduces leaks, shudders, slippage, and sludge buildup.Jan 26, 2022
Should I use a transmission additive?
Generally, most vehicles are simply used to take people to work, school or shopping so don't need ATF additives. For these everyday activities the manufacturer recommended automatic transmission fluid alone should be enough to protect the transmission in most situations they will encounter.
What does gearbox treatment do?
The right treatment will lower the running temperature of your transmission, which will prevent overheating. It will also reduce the wear on parts and keep your transmission running properly. Putting less strain on your transmission will help to prolong its life.
Will a dirty transmission filter cause slipping?
When the transmission fluid isn't clean or is blocked by a clogged filter, the internal components won't have the lubrication they require to function properly. This could lead to shifting issues, grinding gears, slipping transmission or other common symptoms of transmission problems.
How do you temporarily fix a slipping transmission?
2:264:13How to Fix a Slipping Transmission in Your Car (Fluid Change) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff. Then users get the new filter and pop it in the transmission. It just fits in the hole that itMoreOff. Then users get the new filter and pop it in the transmission. It just fits in the hole that it came out of and you whack. In then the pan with a new gasket slips on and you put all the bolts. On.
How long does it take for transmission additive to work?
After adding it to your transmission, you should drive around for 15 – 20 minutes in order for it to fully blend with the existing fluid. You should notice the effects almost immediately.
What is a good transmission conditioner?
Editor's Pick: Lucas Transmission Fix. ... Marvel Mystery Oil. ... Bar's Leaks Transmission Repair. ... Sea Foam Trans Tune. ... Prolong Super Lubricants Transmission Treatment.May 20, 2021
Why does my car jerk when shifting gears with an automatic transmission?
Automatic transmissions that shift hard, jerk or shake during a shift change may mean your transmission fluid needs changed or fluid level is low. In manual transmission vehicles, abnormal gear shifts could indicate damaged gear synchros, worn clutches or other, more severe issues.Sep 17, 2014
Do ATF additives work?
In most cases, unfortunately, the answer is no. In general, the additives that you'll find on the shelves of a consumer-oriented parts store won't really deliver on their extravagant promises. So what do these additives do? In general, they soften and swell the seals in your transmission.Jun 25, 2018
Does prolong transmission treatment work?
Prolong Transmission Treatment is particularly effective under extreme pressure conditions, providing significant protection against one of the most costly automotive repairs.
How can I make my gearbox smoother?
1:262:47How To Make Your Car Gear Shifting Smoother | How To Add Lucas OilYouTubeStart of suggested clipEnd of suggested clipAdd to the gear oil to eliminate leaks revitalizes all engines stops it from smoking up knocking.MoreAdd to the gear oil to eliminate leaks revitalizes all engines stops it from smoking up knocking. And other noises as well as maintaining new engines boost up the oil life by 50%.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
All Cermatreatment.com products are warranted for a minimum of 60 days from date of purchase. The warranty is simple, if for any reason your the purchaser is not satisfied with our products you may request a full refund of actual total paid to Cermatreatment.com, less any shipping expenses incurred by cermatreatment.com to ship your order.
What is a Lucas oil transmission conditioner?
This Lucas Oil transmission conditioner is another premium product that works on conditioning seals and improving performance. The formula consists of a unique blend of additives that help extend the life of new and old transmissions. It also works incredibly well with all types of automatic transmission fluids both synthetic and conventional. Much like the above-mentioned additives, the Lucas conditioner was designed to reduce shudder and noise, resulting in a smooth and quiet operation. It also conditions seal and improves both oxidation and stability. Lucas conditioner can be used in new and old transmissions found in recreational vehicles and light duty trucks.
What is the best additive for slipping transmissions?
Lucas Transmission Fix is our top pick and the best additive for slipping transmission. The non-solvent formula is effective and reliable when it comes to dealing with issues related to performance. This transmission treatment gives car owners the best of both worlds in terms of quality and price with a 24-ounce bottle that will give any car the tune-up it deserves. Lucas transmission fluid decreases the operating temperature and puts an end to foaming. The formula is also solvent free and is capable of drying up most seal leaks, however, it does not work on CVT systems. In terms of prevention, this additive allows vehicle owners to carry out preventative maintenance at an affordable price.
What is trans tune oil?
The Trans Tune transmission additive from Sea Foam is another quality product made of three blended oils. The formula is not only effective in tackling transmission related problems, but it also flushes out moisture and damaging deposits found in hydraulic pumps and power steering systems. Trans Tune works with all commercial synthetic and petroleum based hydraulic fluids without altering their viscosity. It also cleans sticky valves and reduces rough shifting thanks to its petroleum-based formula. This quick action fluid conditions automatic transmission fluids and stops oil loss without softening the seals or O-rings.
What is Lubegard used for?
This tolerance to heat prevents it from thinning out or reacting with oxygen. This feature makes it the ideal additive for old and fresh automatic transmission fluids. The formula also reduces friction, optimizes performance and lowers the operating temperature. All of the above works in favor of new seals and old ones as well. This Lubegard product is available in three different sizes and can be used with all mineral based and synthetic automatic transmission fluids.
What is Zmax transmission?
zMax transmission formula boosts performance at an incredibly cheap price. The 6-ounce bottle may be small, but it can be used for both automatic and manual gears. zMax was designed to reduce leaks and varnish as well. Fluid loss happens due to the presence of road debris and heat within the system and this is far from favorable. Varnish buildup is also a nuisance and can easily wreak havoc on the gears, which is why applying an additive like zMax is necessary. The formula can be used in modern cars without a problem but is not compatible with CVT transmissions.
What is liquid moly oil?
Liquid Moly is a premium brand that offers a wide range of motor and transmission oils including a great additive for automatic transmission systems. The formula prevents oil loss and keeps the transmission components clean and free from damaging deposits. It also rejuvenates seals and reduces loud shifting noises. Poor fluid conditions and oil contamination due to oxidation can eventually lead to transmission failure. This ATF additive reenergizes old oil so it can do its job once more. It is also capable of extending the life of fresh oil. Refreshing oil performance and cleaning the small mazes within the oil galleries of the transmission play a crucial part in extending the service life of any transmission. This German creation contributes to better power steering and noise reduction and is closer to a paste than a fluid in terms of texture.
What is instant shudder fix?
The Instant Shudder Fixx is a concentrated formula that works with all synthetic and traditional automatic transmission fluids. 2 ounces may sound like a small amount, but the friction modifier formula delivers immediate results and solves shudder issues that can easily ruin your day. This additive can be used in all automatic transmission systems with a few exceptions including CVT and dual clutch transmissions. The compact tube is pricey when compared to other additives, but the instant shudder fix is highly rated and recommended so it is definitely worth the money.
Customers who bought this item also bought
RVS Technology G6 Engine Treatment. for Gasoline Engines with an Oil Capacity up to 6 quarts. Restore and Protect Your Engine, Save Fuel, Increase Power. Safe for All Engines.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
Cerma STM-3 Automatic Transmission will restore fast smooth shifting, while giving you protection unmatched by any other product sold anywhere! Cerma STM-3 for Transmissions utilizes our SiC technology to form a micro-ceramic protective coating on all metal parts within your vehicle's transmission or gear box.
What other items do customers buy after viewing this item?
There was a problem filtering reviews right now. Please try again later.
