Each applicant seeking certification at the Grade 2 or 2A level or higher must demonstrate his/her ability to conduct the laboratory tests necessary for the control of the operation of a wastewater treatment plant. Candidates must either successfully complete a laboratory exam conducted by NYSDEC, or complete a NYSDEC approved laboratory course.
- Education: High School diploma or General Equivalency Diploma.
- Work Experience: two years of work experience. At least one half of the work experience must be obtained in the specific field for the license that is requested.
How do I get a wastewater treatment plant certification?
Copies of the certification statute and the certification rule (page 161) are available online. The minimum requirements to sit for an exam are: one year of hands-on experience in the operation of wastewater treatment plants and a GED or high school diploma. There is no substitution of education for the one year of experience.
How do I determine what grade level of wastewater treatment plant operator?
In order to determine what grade level of wastewater treatment plant operator a facility is required to maintain, you must first know the plant score of the facility. The most recent plant scores for the majority of New York's municipal wastewater treatment plants (PDF) is available.
Is DEC certification required to operate a wastewater treatment plant?
DEC Certification is Required to Operate a Municipal Wastewater Treatment Plant New York regulations in 6NYCRR Part 650. (Leaves DEC website), require the operation of municipal wastewater treatment plants to b supervised by a certified operator.
How many water and wastewater treatment operators pass state certification each year?
Only half of the water and wastewater treatment operators pass their state certification exams each year. 99% of American Water College students who put in the work and complete their course, pass their exams the first time.
What is a T2 certification?
T2. High School Diploma / GED Equivalency* AND. One 3-unit (or 36-hour) course of specialized training covering the fundamentals of drinking water treatment. Successful completion of the Grade T2 examination within the three years prior to submitting certification application.
How do you get a Class B water license in Florida?
All Operator Certification Program exams are administered via Computer Based Testing (CBT) through our testing vendor PSI. Once you receive an examination approval letter from the Florida Department of Environmental Protection (DEP), you may schedule online or call 855-557-0617 to schedule your exam.
How do I become a wastewater operator in California?
To receive a certificate, you must meet the minimum experience and education requirements and pass a written test. Please refer to the Certification Requirements for a summary of the experience and education necessary for each grade. For future exam dates and information please refer to the examination schedule.
How do you get a Class C water license in Florida?
An applicant for a class C water license must pass educational and examination standards, plus work in the industry, before applying for the license. Complete a class approved by the Florida Department of Environmental Protection (FDEP) in water or wastewater treatment.
What is class A water?
Class A water is water designated for high-exposure uses, including: residential developments (for example, 'dual pipe' systems for toilets and garden use) irrigation where access is public and unrestricted. irrigation of edible crops intended for raw or unprocessed consumption.
What is a Florida operator license?
The Department of Highway Safety and Motor Vehicles issues the following classes of licenses: Class A, B, C, D, and E. Classes A, B, and C are for drivers of commercial motor vehicles such as large trucks and buses. Classes D and E are for drivers of non-commercial vehicles.
How long is a water treatment course?
Minimum duration: One year.
What is a T1 operator?
Definition Water Treatment Operator The state of California has five operator grades, T1-T5. A T1 certificate is the lowest grade and the T5 is the highest. Progression through the grades requires a combination of specialized training courses and plant experience.
What is a water distribution operator?
WATER DISTRIBUTION. OPERATORS. are responsible for operating and maintaining a water distribution system.
Is Florida Water from Florida?
It's primarily made by the company Murray & Lanman and carries a very citrusy, floral scent. As Gabriela Herstik, author of Inner Witch and Bewitching the Elements, adds, it was given the name "Florida water" because the Fountain of Youth is said to be somewhere in Florida.
What is a Class D water license Oklahoma?
Class "C" Water/Wastewater Operator. Class "D" Water/Wastewater Operator.
What is WWTP certification in New York?
WWTP Certification in New York State is a mandatory system whereby an individual is determined to be qualified to be a chief operator or assistant/shift operator for the operation of a Wastewater Treatment Plant (WWTP) for the purpose of meeting the requirements of its State Pollutant Discharge Elimination System (SPDES) permit.
How to become a WWTP operator in New York?
The final step to becoming a New York State Certified WWTP Operator is passing the required certification exam. New York State uses an Association of Boards of Certification (ABC) Exam. The ABC exam is a computer-based exam which consists of 100 multiple choice questions. A passing score is a grade of 70 or higher.
How long is a NYWEA operator license valid?
An Operator's certification is valid for five years from the date of initial certification (or prior renewal). The certificate expiration date is listed on the operator certification card. Certificates are renewed by completing DEC-approved training courses to receive renewal training contact hours. Renewal training completion certificates, along with the renewal application must be submitted to NYWEA for review and approval. The number of hours required to renew depends on the operator certification grade.
Who regulates water treatment operators?
NYSDEC is responsible for the regulatory aspects of the program and approval of renewal training courses. The New York State Department of Health (NYSDOH) regulates drinking water treatment operator certification. Visit the NYSDOH website for more information on that program.
How long does it take to renew NYWEA?
DEC allows one year after the expiration date to get a complete renewal application to NYWEA , including all the required training. If you do not renew within one year, you will need to complete the required training and retake the ABC certification exam.
What is required for a wastewater treatment plant?
A minimum period of approved operating experience is required in a wastewater treatment plant of the same point score (or higher) for which you are seeking certification . If you are seeking certification as an activated sludge or "A" operator, your approved operating experience must be at an activated sludge treatment plant with the same point score or higher for which the certification is being sought.
What do you need for grades 1 and 2?
Grades 1, 2, 1A, and 2A require a High School Diploma or a High School Equivalency Diploma. Education Options for Grades 3 and 3A: Grades 3 and 3A can use any one of the following options to meet the minimum education requirement; a.
How many credit hours does an A.A.S. degree take?
an Associate in Applied Science (A.A.S.) degree from a duly accredited university or school plus eighteen (18) months of operating experience at a wastewater treatment plant (An Associate of Arts (AA) degree with 30 credit hours of math or science is considered equivalent to a A.A.S. Degree.); or.
What degree do you need to be a 4A?
Education Options for Grades 4 and 4A: Grades 4 and 4A can use one of the following options to meet the minimum education requirement: a Bachelor of Science degree from a duly accredited university or school . This degree is not restricted to an engineering or natural science major;
Where to submit lab experience to NYSDEC?
To be considered for the exemption, you must document your lab duties and experience and submit it to NYSDEC, Bureau of Water Compliance, 625 Broadway, Albany, NY 12233-3506.
Do you have to complete the Basic Operations Course for a Grade 4?
For example, a Grade 4 applicant must complete the training required for the Grade 2, 3 and 4 levels. Grade 2, 3, and 4 candidates are not required to complete the Introductory Course however. These candidates start at the Basic Operations Course and progress to their desired certification training level.
Wastewater Operator Professional Growth Cycle and Renewals
Operators commonly meet their professional growth by earning 3.0 continuing education units (CEU) each professional growth cycle. Operators earn these CEUs by attending approved training courses. Operators must document their CEUs and submit it to the OpCert Program as they receive it. This ensures that they stay current on their requirements.
Wastewater Operator Certification Program Fee Schedule
We made no changes from the draft fee schedule published on March 31, 2021 and the fees will remain at the levels listed below.
Frequently asked questions: coronavirus impacts to the OpCert Program (updated April 6, 2021)
I heard the OpCert program sometimes lets people take the exam at their treatment plant or at Ecology offices. Is that an option? Can I arrange for someone in my area to proctor an exam?
Wastewater Treatment Plant Operator Certification Program Guidance
We adopted changes to chapter 173-230 WAC Certification of Operators of Wastewater Treatment Plants in 2019. This:
Wastewater Treatment Plant Awards
There are more than 300 wastewater treatment plants. In 2020, nearly 40% met every single standard and deadline for the whole year. We recognize these facilities through our award program.
How many levels of operator certification are there?
Certification. There are five levels of operator certification (Grades I – V). To receive a certificate, you must meet the minimum experience and education requirements and pass a written test. Please refer to the Certification Requirements for a summary of the experience and education necessary for each grade.
Can you work part time in the US with a wastewater certificate?
You may work either part-time or full-time performing operator duties while holding an Operator-in-Training certificate or a wastewater certificate at a lower grade level. Part-time experience will be prorated, e.g. two years of half-time work equals one year of qualifying experience.
What are the skills required to be a wastewater operator?
Wastewater treatment operator roles do vary from organization to organization, but most will have the following tasks as part of their scope: Strong mathematical, mechanical and science skills. Ability to engage in logical processes for troubleshooting. Excellent interpersonal, verbal and written communication skills.
What is wastewater treatment operator?
A Wastewater Treatment Operator maintains a variety of plant equipment in connection with the operation of a large wastewater treatment plants, directs lower level operators and performs related work as required.
What are the duties of a wastewater operator?
Senior wastewater treatment operators have a depth of experience and management skill that illustrate a ‘leader' mentality and skillset. In addition to the standard role, wastewater treatment managers may be required to perform the following as part of the scope of senior duties: 1 Evaluate and troubleshoot operations at various water and wastewater sites 2 Identify risks and opportunities for efficiencies and improvement 3 Support existing contract operations sites, including evaluations and troubleshooting 4 Implement new technical solutions or best operating practices 5 Periodic auditing of overseer and/or supervisor roles at contract operations sites 6 Develop and implement processes to meet customer needs. 7 Implement best operating practices 8 Train operations staff on new and innovative operational approaches 9 Support business development activities 10 Conduct due diligence checks amongst human resource and mechanical processes 11 Prepare operational plans and strategies 12 Develop operational budgets 13 Writing operational and/or technical sections for proposals and manuals 14 Managing transitions for new contract operations sites
What is the American Water Works Association?
The American Water Works Association (AWWA) is the largest association dedicated to managing and treating water. The AWWA provides education to water professionals, advocates for safe and sustainable water, collects and shares journals and scientific reports and creates volunteering opportunities.
When is the wastewater pump class in Prattville, Tennessee 2021?
The class is on Wednesday March 24, 2021 from 8:30 AM to 3:00 PM . Social distancing will be arranged and masks must be worn.
What division is operator certification?
The operator certification regulations are in Division 335-10-1. At this time, all PSI test centers are open for administering operator exams. Please be aware that candidates must follow social distancing guidelines, bring a face mask, and wear the mask during the entire exam duration.
Is Form 505 accepted by the Alabama Department of Education?
Electronic submittals of Form 505 are not presently accepted by the ADEM. The appropriate exam fee must accompany the exam application that is mailed to ADEM. The Alabama operator exams are administered at one of the Computer Based Test (CBT) Exam Centers owned and operated by a company called PSI/AMP.
