Clearly the success of any soil termite treatment is dependent on ensuring an even application of chemical around and under the property. If there are concrete paths or pavers around the property, it is possible to drill through concrete and pavers and inject the product into the ground.
Full Answer
How to get rid of subterranean termites in concrete slabs?
Subterranean termites live below ground and may enter the structure passing underneath the concrete slab. The termite treatment method is to apply a liquid pesticide (termiticide) to block this possible entry point. During the injection with a rod, back flow of chemical may occur from the injected hole or the adjacent holes:
How to get rid of termites without pesticides?
Termites are heat-sensitive, so heat can be an excellent termite repellent and an easy homemade termite killer. If you can heat up a space to at least 120 degrees F. for at least half an hour, the termites there will die. This is a cost-effective way for DIY termite control without using pesticides.
How does termite treatment work?
The chemically treated zone surrounds the perimeter of the building and makes a termite chemical barrier. During the termiticide injection with a rod, back flow of chemical may occur from the injected hole or the adjacent holes in the concrete slab: HOW TO KILL TERMITES WITH THE MABI SYSTEM?
How do you apply termiticide to a concrete driveway?
If concrete such as a carport slab or sidewalk is against the foundation in the area where you need to treat, you will be required to drill through the concrete to apply the termiticide solution to the soil. Using the hammer drill with a 1/2" x 18" concrete drill bit, drill holes every 12" into the concrete along the foundation wall.
How do you treat termites in a patio?
Some of the best ways to get rid of termites is to apply termite-killing products to your home's exterior, use direct chemicals on the inside of your home, set up termite baits, and spray boric acid in your floors and walls.
How do you treat termites under concrete?
To control a termite infestation underneath the slab, a pest control professional typically will recommend a termiticide treatment that can be applied through rods reaching under the house or holes drilled in the slab.
What is the most effective treatment for termites?
Borate wood treatments are the most effective and are administered by pest control professionals. Borate is a long-lasting termite killer and repellent, which is soaked deep into the wood grain. It kills any existing termites on contact and prevents the colonies recurrence.
Do termites eat cement blocks?
The short answer is no. Termites cannot digest concrete. Although wood is their preferred source of nutrition and what they are well-known for eating, termites have also been known to eat drywall, foam, plastics and even thin lead and copper cheeting materials especially when it's in the way of them getting to wood.
Should I spraying for termites before pouring concrete?
Our most popular product is Dominon 2L for termite treatments. You should treat the entire area before they pour the slab. This is called a pre-treat. You should apply the product at a rate of 1 gallon per 10 square feet.
Is drilling necessary for termite treatment?
Answer: The answer to this question is also in our How To Do A Termite Treatment Article. For your garage, porch, patios, or other contiguous slabs against the home, you will need to get the termiticide underneath the concrete against the foundation. To do this you will need a hammer drill with a 1/2" x 18" drill bit.
How do I make my own termite treatment?
Cardboard trap: Once you've identified the source of your termite infestation, wet two pieces of cardboard and stack them on top of each other to make a kind of DIY bait. The cellulose in the cardboard will attract the termites, and the pests will get caught between the two pieces.
Do termites come back after treatment?
Will termites come back after treatment? Termites may return after treatments. Luckily, companies like Orkin and Terminix promise to re-treat at no extra cost if you have a termite plan with them.
What kills termites naturally?
Borax powder, or sodium borate, can kill termites naturally. You just sprinkle the powder on the termites and the affected area, or you make a solution of the powder and water to spray or paint on affected areas. You can also paint the solution on surfaces as a termite repellant.
How do you treat a block foundation for termites?
Treating foundation walls or solid brick piers: Subterranean termites live below ground and may enter a structure through cracks in the foundation walls or brick piers. To block the possible entry point from termites, you have to apply a pesticide (termiticide).
Can termites go through mortar?
Solid concrete blocks and mortar are not penetrable, but any gaps in the mortar can provide a route to the other side where the good stuff is. Two worker termites can fit easily on the head of a match, so even a crack like the one shown at the top of the page is enough for them to squeeze through.
Can termites penetrate concrete?
How large of a crack in concrete is needed for termites to access? Answer: Termites cannot eat through concrete. The issue is that no matter how well poured, concrete will crack as it settles. When poured around plumbing, it will retract or shrink from around the pipes.
What is the best termite treatment for subterranean termites?
The newer termiticide products are known as non-repellents, which is what we recommend using for Subterranean termite treatments. Non-repellent products offer three benefits over pyrethroids.
How to apply termiticide to a trench?
Add the recommended amount of concentrated termiticide as per the product label. Stir the solution thoroughly with a paint stirrer or other tool until the concentrated liquid is evenly dispersed in the water. You will repeat this procedure for every 10 feet of trench.
What to use instead of trenching?
The alternative to using a trenching treatment is to use Termite bait stations. Termite bait stations can be used when trenching is not possible or not desirable. The benefit of using termite bait stations is that it is less labor intensive to install them and you are not actually putting a chemical into the ground. The downside is that you do need to inspect your stations every 3-4 months for termite activity and you will need to add fresh attractants once per year.
How many gallons of termite per 10 feet?
It is difficult to get 4 gallons per 10 feet in the holes, so it is important that you use a long drill bit, at least 18" long so you can bore out enough dirt to hold the termiticide. Sometimes the ground is slow to soak up the termiticide you place in the holes.
How far should termite bait stations be?
In most cases, termite bait stations should be place around the perimeter of the structure at intervals of approximately 8 to 10 feet. If areas exist where one or more of the above conditions are present, station placement should be more concentrated (stations placed at closer intervals).
Can termites invade your house?
Termites are extremely opportunistic and can find creative ways to invade your home. By following a few outdoor sanitation tips you can help keep termites away from your structure.
Can termites detect a barrier?
Termites cannot detect the barrier around a structure so they will not seek out parts of the barrier that have been disrupted or missed Termites that cross through the barrier will pick up the residual on their bodies and transfer it back to the nest.
How to get rid of termites?
This DIY termite control project is quite effective: Dig a trench around the entire problem area and fill it with a foam-based non-repellent termite insecticide. "Non-repellent" means that termites won't be driven away from it, but rather they try to move through it and die. And it's ideal for stopping repeat encounters.
How to keep termites out of wood?
Any place that you have wood that you want to protect—especially siding and decks—you should try to separate it from soil (where termites linger) by at least 18 inches. This is enough to keep termites uninterested. The easiest method is to use a gravel bed, which can serve as DIY termite control and good drainage at the same time.
How to check for termites in a crawl space?
Grab Your Flashlight. The easiest way to check for termites is to get a good flashlight and head down to your crawlspace or basement. Take a close look around for any signs of damage or mud tubes, paying close attention to edges and corners. And if you come across wood that you think may have termite damage, you can always try the old thumb test. ...
What is termiticide used for?
Repellent termiticides help you protect wood that has not yet been located by termites. Use it around sheds, decks, fences and similar areas to help prevent termites from discovering them. 10 / 13. Csehak Szabolcs/Shutterstock.
What is the best way to keep termites out of your house?
Cardboard is another big draw for termites. If you store anything in cardboard around your house or garage, replace that cardboard with plastic bins. If you store cardboard for recycling, make sure it's in a recycling bin and not just piled up somewhere.
Do termites eat concrete?
Several times a year, take a slow walk around your foundation and look for any signs of damage so you can formulate a termite treatment plan. No, termites don't eat concrete, but they do create mud tubes, which are a sign termites are trying to scale up your foundation in search of siding or other tasty wood.
Can termites eat wood?
When building something new for your garden or yard, remember to use pressure-treated wood to help prevent termite damage. Termites rarely try to eat wood combined with chemicals.
BEFORE USING THE MABI SYSTEM ON CONCRETE SLAB TO KILL TERMITES
During the termiticide injection with a rod, back flow of chemical may occur from the injected hole or the adjacent holes in the concrete slab:
HOW TO KILL TERMITES WITH THE MABI SYSTEM?
Choose the best protocol for your company: combine your effective termiticide with the best proven practice for consistency in your treatments with the MABI injectors.
Why do termites burrow in concrete piers?
Concrete piers are an important means of support for homes and structures. Subterranean termites can burrow through the soil and around the concrete piers in search of wood for food, creating a large infestation and potentially costly problem. Preventing termites is key, so a thorough application of liquid termite killer around ...
How to treat a trench with a shovel?
Fill the trench with soil using a shovel or rake, spraying the soil as you go to treat it. The soil should be evenly saturated but not soaked and muddy. Keep kids and pets away from the application area for at least 24 hours after application.
Can you use liquid termite killer on concrete?
Preventing termites is key, so a thorough application of liquid termite killer around the concrete piers can create a barrier between the soil and the structure. Soil treatments work best as a preventative measure, but aren't particularly effective if termites have already entered the structure.
How to Identify Termites
Termites and flying ants possess a very similar appearance, enough so that, without closer inspection, you may mistake one for the other. In order to effectively treat your pests, you must properly identify which insect is responsible for your infestation.
What Are Termites Attracted To?
Unfortunately, there are many things that can attract a termite to your home.
Termite Treatments
While you should leave termite removal to the professionals, knowing the methods they will use can help you in understanding how to kill termites, the best ways to treat the problem and help prevent it from recurring.
Termite Prevention
Taking steps to prevent termites can save you a great deal of money. Moisture is an absolute necessity for termite colonies to survive and thrive, so eliminating damp areas around your house is essential to preventing termites.
