General treatment guidelines
- ➡️ Poison the soil using termiticides. For a proactive and immediate result, builders will ask for soil treatment before pouring the base slab.
- ➡️ Digging holes and pouring the chemical. Another method that the exterminator can use is drilling holes within the perimeter of the property.
- ➡️ Treating foundation area. Before the foundation is put to place, the spot will be treated with termiticide to prevent the access of the pest.
- ➡️ Particle barrier installation. After treating the soil and foundation areas, the construction builder may also add a basaltic rock or sand as an additional barrier against the termites.
How to get rid of termites in soil?
Soil treatment for termites applies some termite insecticide like fipronil or imidacloprid on the structures like the house or wall foundations and wood. However, you may termite-proof wood through pressure-treating using chemical insecticides or spraying.
Should termites be treated before construction?
Treating termites before construction starts can help you defend against possible claims in the future as they frequently dwell where there is a high concentration of moisture and dampness. In old houses, these are frequent problems because they tend to live in obstructed or blocked water supply and sewerage pipes.
How do termites get into a house?
Termites can invade a house through the voids in hollow-block masonry such as the fireplace base. Figure 8. Termites can invade a house through the voids in hollow-block masonry such as the fireplace base. Figure 9. termites can get around termite shielding that is poorly installed or has deteriorated over time.
How can we prevent termites from entering our homes?
A great deal of ongoing research is being been directed at materials that can be placed around the foundation as physical barriers to termite invasion. Although these methods primarily target new construction, in some cases, application to existing houses appears to be feasible, though more expensive.
How do you treat soil for construction?
To soil treat a site of new construction, generally, a trench is dug adjacent to both sides of the foundation walls, and the soil is soaked with pesticide. The soil is then replaced into the trench, carefully mixing it with the diluted pesticide.
How do you treat for termites before pouring concrete?
Our most popular product is Dominon 2L for termite treatments. You should treat the entire area before they pour the slab. This is called a pre-treat. You should apply the product at a rate of 1 gallon per 10 square feet.
Is termite pretreatment necessary?
A proper termite pretreatment is necessary to provide maximum protection against termite invasion.
How do you treat termites in foundation?
First, a trench is dug around the foundation, and the soil is treated with a termiticide. The trench is then refilled. This type of treatment helps prevent future termite infestations, and kills any termites in the house as they to return to the soil to nest.
How long does termite treatment last in the soil?
about five yearsAccording to industry research, termite treatment generally lasts about five years. Liquid treatment on the soil around the home lasts between five and eight years, depending on the product used, and how complete the application is. If your home had termite bait treatment, it will last for around one year.
Which chemical is used as a soil treatment in termite proofing?
6. Which chemical is used as a soil treatment in termite proofing? Explanation: The various patented chemical Insecticide such as DDT, PHP, PCP, etc.
Which chemical can be used for termite protection before construction?
The chemicals used for anti-termite treatment in buildings as per Indian Standards (IS 6313 Part-3) are : Chlorpyrifos 20 EC. Lindane 20 EC.
How do you pretreat a house for termites?
1:063:12Areas again at specified rates example of critical areas include pipe penetration points expansionMoreAreas again at specified rates example of critical areas include pipe penetration points expansion joints and any other predetermined break points in the slab.
How do you treat termites under concrete slab?
A "slab" is a type of concrete foundation that does not have a basement or crawlspace. To control a termite infestation underneath the slab, a pest control professional typically will recommend a termiticide treatment that can be applied through rods reaching under the house or holes drilled in the slab.
How do I get rid of termites in my soil?
Adding organic material to the soil, crop rotation, physical barriers, encouraging predators, plant parts and plant extracts can be used effectively for control of this insect.
How do you clean termite mud tubes?
Once you've received treatment, and termites are gone for good, you can clean the termite tubes by scraping them off the surfaces and disposing of them.
What is anti termite treatment in construction?
Anti-termite treatment is a chemical procedure carried out for soil, masonry, wood, and electrical fixtures to provide the building with a chemical barrier against the subterranean or wood-nesting termites before and after construction.
How do termites invade a house?
Skip to Foundation Termite Barriers. Termites usually invade homes by way of the foundation, either by crawling up the exterior surface where their activity is usually obvious, or by traveling inside hollow block masonry ( Figure 8 ).
When to use baits for termites?
In some instances, baites are used when a liquid treatment is considered unacceptable for whatever reason or they may be used in conjunction with a liquid treatment. With new construction, baiting systems are not actually installed until after final grading is completed so ...
What is termite resistant?
"Termite-resistant" building materials are not new; some date back to the early 1900s (or earlier). There are a number of building materials that are becoming more popular in North Carolina as alternatives to conventional siding and other materials, which are typical vulnerable to termites and other wood-destroying organisms ( Figure 13 ). The manufacturers assert that these products are termite (and decay) resistant and usually carry a long-term, limited warranty. Example of such products include HardiPlank ® and HardiPanel ®. As in the case of treated lumber, these products are more expensive than most conventional building materials. However, their long-term benefit in terms of durability and pest-resistance should be considered.
What is a metal termite shield?
Metal termite shields ( Figure 9) have been used for decades to deter termite movement along foundation walls and piers on up to the wooden parts of the structure. The shields are rarely installed in modern construction. If installed improperly (i.e., not soldered/sealed properly) or they become damaged or deteriorated ...
What is termi mesh?
Termi-mesh ® ( Termimesh Australia Pty Ltd.) is stainless steel mesh (apperture of 0.66 x 0.45 mm) that is wrapped around foundations, pipes, posts to prevent termite intrusion ( Figure 7 ). The product is marketed in Australia and, more recently, in parts of the United States, particularly in Hawaii. Termi-mesh was installed in a house in western North Carolina during 1999. State regulations do allow the use of this product as a substitute for a conventional (liquid) or bait termite treatment in new construction.
What chemicals are used to treat lumber?
A number of chemicals are used to pressure-treat or surface-treat lumber, including "CCA" ( C hromated C opper A rsenate), which is being phased out of use by the USEPA, as well as disodium octoborate tetrahydrate and several others. Treated lumber can also be used in other parts of your home, such as in the framing.
What is treated lumber?
Treated lumber. North Carolina Building Code requires the use of treated lumber in certain areas of a home, such as when the wood that will be in direct contact with soil or mounted on masonry in contact with the soil (e. g., the wooden " sill plate" that rests on your foundation ).
How Do I Prepare My Home for a Termite Treatment?
Termites are destructive pests that can do a significant amount of damage to your home very quickly. An average colony will consume about one foot of 2 x 4 beam every six months and can affect the structural integrity of a home in as little as two to three years. In short, it’s essential to keep your home protected from termites.
Chemical Termite Treatments
There are several chemical options to get rid of termites, including termiticides and gas fumigants. Your pest control professional can complete a termite inspection and help you decide on the best way to treat your home based on the type of termites you have and the extent of the infestation.
Termiticide
Termiticide is an insecticide with active ingredients that attack the termites’ nervous system to kill them. Your exterminator will spray your lawn and the areas around your house, saturating the ground and reaching into the termite tunnels. Termiticide takes little to no preparation and isn’t dangerous to pets or wildlife.
Fumigant
Termite fumigation is a highly effective way to rid your home of termites. During this treatment, your exterminator will surround your home with a tent and release gas. The fumigant will kill any termites present, even those hiding in hard-to-reach places. However, unlike termiticide, you will need to prepare for the treatment.
Preparing Your Home for Fumigant Treatment
Termite treatment fumes can penetrate through cracks and crevices and are unsafe for humans or pets to breathe in. Your food and medicine are also at risk during the fumigation process and must be appropriately protected.
Make Arrangements Away From Your Home
The first step to prepare your home for fumigant termite control is making sure that your home is empty. You, your family, and your pets can’t stay in your home during the termite tenting process, so you’ll need to arrange accommodations elsewhere.
Remove or Protect Food and Other Items
Before treatment begins, you will need to either remove food, medicine, and hygiene products from your home, even if they are unopened or protect them adequately. It’s imperative to check all areas of your home for any food or medication.
How to prevent termites from getting in wood?
1. Borate Pre-Treat on exposed wood. Pre-treat all the exposed wood studs on your house and nearby structures. Use a wood preservative or insecticide like Boracare as the termite prevention ability will last the treated wood’s lifetime. Dig a 6 inches (deep) by 6 inches (wide) trench in the soil around the house or structure to be pre-treated ...
How to treat wood for termites?
Some of the methods for a termite treatment on wood include pressure-treatment. Pressure-treating the wood and the soil around it makes your structures to be termite and carpenter ants resistant. The treatment involves the application of a chemical preservative through the use of high pressure.
What is termite mesh?
Terms-mesh is a closely-knit mesh (made from stainless steel) that lasts for a long time, and hence the termites won’t easily penetrate it to eat your house and nearby structures. However, Termi-mesh is mainly offered as an additional termite control service instead of a stand-alone offer by the exterminator companies.
How to treat crawl space with Termidor SC?
For crawl spaces, treat the soil with Termidor SC through the dug holes or trenches. For this, you’ll also need to dig 6 inches (deep) by 6 inches (wide) trenches around wall footing, foundations, trench, piers. Pour and mix up the insecticides with the soil. To treat the basements for termites, drill some equally spaced holes on ...
Can you use Termidor SC on concrete?
Use Termidor SC to pre-treat the concrete slabs, and this would work better if you apply the insecticide under the selected concrete slab – this is before pouring. But for a slab that’s already installed – you’ll have to inject the chemical termite killer via a drill hole.
Can you use termite bait on drywood?
Also, you may place termites baits on appropriate locations in the yard. However, for Drywood, Dampwood, or Formosan termites, I recommend undertaking fumigation or use one of the approved termite killers. Below I’ve discussed how you can treat the soil for termites.
Can you use fipronil on wood?
However, you may termite-proof wood through pressure-treating using chemical insecticides or spraying. Also, you may place termites baits on appropriate locations in the yard.
Discuss Treatment Options With Your Builder
A good starting point for termite treatment options is to discuss the topic with your builder.
A Final Word On Termite Treatment
The best termite prevention method is different for every person and depends on many factors. Key points to consider are how your home is constructed, the type of soil, the incline of your block and your region.
Protect Your Home With TermiGold
If you are still wondering how to prevent termites when building a house, feel free to get in touch with TermiGold. As one of the leading termite control experts, we can offer an expert opinion with no obligations.
Why treat termites before construction?
Treating termites before construction starts can help you defend against possible claims in the future as they frequently dwell where there is a high concentration of moisture and dampness. In old houses, these are frequent problems because they tend to live in obstructed or blocked water supply and sewerage pipes.
How to keep termites out of my house?
When all measurements have been taken, perform these simple steps to ensure that your area keeps free of termites. Keep drains and gutters clean to avoid leakage. Make sure that there are no blocked lines, no filtration, nor broken pipes with excess moisture around them. Eliminate all sources of moisture.
How do I treat a termite infestation?
Start with an assessment of the entire area. Determine the extent of the damage (if any), the location of the termites, access points to the structure, and their spread in the area. The following tips should be kept in mind: 1 As in the pre-construction process, make holes and fill them with chemicals to create a barrier around the house. 2 Treat the floors and walls by drilling holes and filling them with chemicals. All walls or the vast majority should be treated to ensure that no more spreading will continue. 3 Apply chemicals on all points of contact of wood with the ground or with any part of the building. 4 Also, treat any voids in masonry with anti-termite treatment. 5 Change and replace wood products or furniture that have high impact and presence of termites, beyond any limit of reparation.
What is termite treatment?
Termite treatment in pre-construction stages includes several procedures that must be done to ensure an area of termite-free construction. Treating the soil before any slab placement with insecticides is the most common method of termite treatment .
How to treat a construction perimeter?
Treat the perimeter of the construction by making holes filled with chemicals surrounding structure. Fill an area with chemical products in pipe beddings to secure the future of the piping.
How to get rid of termites in the ground?
Remove wood products that have had the presence of moisture or have been in contact with water for a prolonged time. Eliminate wood contact with the ground. Do not bury direct pieces of wood in the ground for any use. Fill junctions or voids.
How to treat the bottom of an excavation?
Treat the bottom and sides of an excavation with chemical products prior to the onset of foundation work. Make holes in the earth and fill them with chemical products where slabs on grade will be built. Use chemicals where walls and floors intersect. Treat the perimeter of the construction by making holes filled with chemicals surrounding structure.
How to prevent termites in a house?
One of the best ways to prevent termite infestations is to use a reliable pre construction termite treatment of the lumber used in your home. Many people constructing a new house or building (contractors or architects) don’t pay enough attention to this crucial aspect of building a new structure which could save the eventual home owner ...
How do I treat subterranean termites?
For subterranean termites pre-treatment involves digging a trench and applying a termiticide (an insecticide for termites) to the solid in the trench. This trench must be deep enough to prevent these dirt-dwelling termites from going underneath and and still gaining access to the foundation to the building.
What is a pre-treatment for dry wood termites?
For drywood termites a common pre-treatment method is to treat the lumber with a coating or soak that will make the wood less appealing or even poisonous for termites. These methods are often referred to as a pre-treat or pre-treatment by pest control professionals.
What are the two types of termites?
There are two basic types of termite, subterranean and drywood. Typically subterranean termites have to stay in the confines of the dark unlit soil they live in as they are sensitive to light. In order to protect themselves as they attempt to venture into the lumber used to construct a building they make mud tubes.
A. Pre-Construction (or Pre-Treat) Termite Treatment
- Termites will cause significant damage to your home, and sadly this isn’t covered in the homeowner’s insurance. These damaging insects will hide in furniture and walls until they’re mature. Here’s how you should do the pre-construction (or Pre-Treat) termite soil treatment to protect your structure at the initial construction phase.
B. Post-Construction (or Post-Treat) Termite Treatment
- You may apply the termiticides on the wood or soil after the construction process is complete. The soil treatment insecticides can come in the form of baitsor liquids.
Conclusion
- Soil treatment for termites with different termiticides, including liquid termite to create a termite barrier plus you may use other termite killers and termite baits. Termiticides have active ingredients such as 7.9% bifenthrin that’ll both repel and kill termites – both instantly and have a more prolonged residue effect killing both fleas (check ...
Sources