Aphogee 2 Step Protein Treatment:
- Put the Aphogee 2 Step Protein Treatment into a spray bottle to make it easier to apply
- Section your hair and spray the product into each section very carefully, focusing on your ends and where the damage...
- Let your air dry for 30 minutes, until the mixture had hardened on my head. DO NOT DETANGLE.
Full Answer
How often should you do a protein treatment?
Some gentler types of protein treatments can be used more frequently (for example, once a week or so), while more intense protein treatments should be used less often (every 4 to 6 weeks) and with extra care. Before you apply a protein treatment, do read the label to see how frequently it should be used – you’ll do your hair a favor!
When to use protein treatments?
- Type of ingredient: Strengthener
- Main benefits: Improves hair elasticity, strengthens the hair follicle, and enhances the overall appearance of hair.
- Who should use it: Those with dry, damaged hair.
- How often can you use it: Salon treatments can range from about seasonally to annually. ...
- Works well with: Oils like castor and jojoba
How often should you use a protein hair treatment?
Signs that Your Hair Needs a Protein Treatment
- Your hair has lost its elasticity. One of the clear signs that your hair may need a little protein help is the loss of elasticity. ...
- Your hair is color-treated. Chances are that, if your hair has seen an excessive amount of hair dye, it could use a little more protein. ...
- Breakage and shedding. ...
- Your hair is limp and stringy. ...
- High porosity. ...
When do I use the aphogee keratin Reconstructor?
It is recommended on tinted, bleached or relaxed hair. It soothes irritated scalp and may be applied following each shampooing until the healthy condition of the hair is restored. ApHogee Keratin 2 Minute Reconstructor helps repair damage caused by chlorine and hard water.
How do you use two-step ApHogee protein treatment?
Using the ApHogee Two-Step Protein Treatment for Curl RestorationGently cleanse hair with ApHogee Shampoo for Damaged Hair. ... Apply Two-Step Protein Treatment by “scrunching” through the hair until completely saturated. ... Leave hair uncovered, DO NOT use a plastic cap. ... Re-wet and gently rinse thoroughly with warm water.More items...
How long do you leave ApHogee Two-Step Protein Treatment in?
it will take about 20-45 minutes for the protein treatment to fully bond to your hair. You will know the protein treatment is complete when your hair feels like uncooked ramen.
Do we put on ApHogee Two-Step Protein Treatment with wet hair?
Use on wet hair to maintain moisture, detangle and improve manageability. Apply liberally to damp hair after shampooing. Massage hair into hair and scalp. Wait 2 minutes, rinse thoroughly, dry and style.
How often should you use ApHogee Two-Step Protein Treatment?
Because of this, the recommended frequency for ApHogee Two-Step Protein Treatment is once every 4 to 6 weeks, depending on your hair maintenance regimen. If applied more often, it's unlikely that any further benefit will be obtained, assuming the application was done according to directions.
Do you deep condition after ApHogee 2 step?
Always follow up with a deep conditioning treatment that includes heat. I wasn't satisfied that the balancing moisturizer did enough post-treatment so I added a deep conditioning step in there. Ensure the deep conditioner has no proteins in it. You can get some moisturizing deep conditioner ideas HERE.
Do you put protein treatment on wet or dry hair?
Yes, for best results, protein treatments should be done after shampooing hair.
Should I wash my hair before a protein treatment?
To add protein treatments into your hair care routine, apply yours on clean, conditioned hair and then wash it out. "If you have fine hair, you may just shampoo and then use the protein treatment so that your hair is not too weighed down," Williams notes.
Can you let ApHogee protein treatment air dry?
Put the Aphogee 2 Step Protein Treatment into a spray bottle to make it easier to apply. Section your hair and spray the product into each section very carefully, focusing on your ends and where the damage lies. Let your air dry for 30 minutes, until the mixture had hardened on my head.
Should I condition my hair after a protein treatment?
Anytime you apply an intense protein treatment, you must follow up with a deeply moisturizing conditioner. Rutlin explains, "You cannot have one without the other. This is why you see some people have brittle and damaged hair.
Can ApHogee damaged hair?
ApHogee Shampoo for Damaged Hair is recommended for everyday use on color treated and damage-prone hair. This rich, luxurious shampoo cleans gently and will not harm color, perm or relaxer services. Proteins, emollients and vitamins restore sheen and pliability to hair damaged by chemicals and heat.
Can you leave a protein treatment in overnight?
Hair masks that contain protein ingredients shouldn't be used overnight. Protein treatments are great if you're only using them on your hair for 20 minutes or so, but keeping protein on your hair for several hours can make your hair too heavy. It could even result in breakage.
How do I know if my hair needs protein?
So how can you tell if you need moisture or protein? The simplest option is to take a wet or dry strand of hair and gently stretch it. If it barely stretches and snaps, you need more moisture and might have too much protein. Also, if you brush your hair and strands fall out, you need protein.
How to use Aphogee protein treatment?
Follow general directions for applying ApHogee Two-Step protein Treatment. After rinsing, towel dry & apply depositing tint in usual way. Place a plastic cap over hair and check every 2-1⁄2 mins.
How to use Aphogee Balancing Moisturizer?
DO NOT comb or brush hair while ApHogee Treatment is dried and in the hair. Re-wet and gently rinse thoroughly with warm water. Remove all excess dried protein. Towel dry. Apply ApHogee Balancing Moisturizer to hair and scalp. Leave on for 2 minutes, then rinse thoroughly.
How to restore natural moisture balance to hair?
A warm dryer may be used. When tinting is complete, shampoo thoroughly from hair. Apply ApHogee Balancing Moisturizer to help restore natural moisture balance to hair. Rinse and proceed with next service or style as usual.
How long to wait before applying relaxer?
Following Relaxer: If a relaxer service results in damage and breakage, wait 24 hours before application. If the service resulted in any scalp blistering or breaks in the skin, treat as called for and postpone the ApHogee service until healing is complete. (This is to avoid stinging)
Can ApHogee 2 step protein treatment cause eye irritation?
If product gets into the eyes, rinse thoroughly with clean water. (The pH of ApHogee Two-Step Protein Treatment is about that of lemon juice and it will cause similar eye irritation).
How to use Aphogee 2 step protein treatment?
Aphogee 2 Step Protein Treatment: 1 Put the Aphogee 2 Step Protein Treatment into a spray bottle to make it easier to apply 2 Section your hair and spray the product into each section very carefully, focusing on your ends and where the damage lies 3 Let your air dry for 30 minutes, until the mixture had hardened on my head. DO NOT DETANGLE. 4 Go into the shower and, without touching your hair at all, let the water run down your hair. DO NOT DETANGLE. 5 Once the hair isn’t hard anymore, massage the hair slowly to make sure all the product is out. Do not leave any product behind.
Does hair need protein?
All natural hair needs protein, but the level and intensity of the protein treatment depends on the current health of your hair. If your hair is significantly protein deficient and is experiencing damage, this protein treatment is for you! Your curls will thank you.
Is Aphogee 2 step protein treatment good for curls?
Aphogee Two Step Protein Treatment. The formula is meant to provide a deep protein surge at once, so if your curls are intact and you aren’t suffering from chemical or heat damage, this treatment may be too strong for you.
Is it normal to dry hair after washing out protein?
Your hair will feel very dry after washing out the protein. That’s normal. Because this is such an intensive protein treatment, you need to follow up with a moisturizing deep conditioner IMMEDIATELY.
How to use Aphogee Balancing Moisturizer?
DO NOT comb or brush hair while ApHogee Treatment is dried and in the hair. Re-wet and gently rinse thoroughly with warm water. Remove all excess dried protein. Towel dry. Apply ApHogee Balancing Moisturizer to hair and scalp. Leave on for 2 minutes, then rinse thoroughly. Proceed to next service or style as usual.
How to apply aphgee tint?
Bleach or lift tint in usual way and rinse. Follow general directions for applying ApHogee Treatment. Depositing Tint – Wash hair with ApHogee Shampoo, rinse and towel blot dry. Follow general directions for applying ApHogee Treatment. After ApHogee is rinsed out, towel dry and apply depositing tint in usual way.
How to use Aphogee protein treatment?
Follow general directions for applying ApHogee Two-Step protein Treatment. After rinsing, towel dry & apply depositing tint in usual way. Place a plastic cap over hair and check every 2-1⁄2 mins.
How long to wait before applying relaxer?
Following Relaxer: If a relaxer service results in damage and breakage, wait 24 hours before application. If the service resulted in any scalp blistering or breaks in the skin, treat as called for and postpone the ApHogee service until healing is complete.
How long before aphgee is used?
When using ApHogee in conjunction with any chemical process, we recommend using the Treatment 24-36 hours before the service. Be sure to follow directions. In fact, ApHogee Two-Step Protein Treatment is used on fine, weak hair and very porous hair to make perms and color last longer! 11.
What is the most powerful single step treatment?
This takes a little longer but last far longer than one step processes, in which all the ingredients are missed for speed and convenience and which contain less protein. The Keratin 2 Minute Reconstructor is perhaps the most powerful single step treatment ...
What is the chemical reducing agent for hair?
This is done with a chemical reducing agent such as: Thioglycolic acid, formaldehyde, compounds that convert to formaldehyde or others. When the hair is formed into the new configuration, the bonds are the reformed by oxidizers such as: Air, hydrogen peroxide, sodium bromate or others.
Can you use a hair strength kit without a dryer?
For hair where breakage is a problem but convenience and ease of use are factors, The Hair Strengthening Kit is a perfect solution. It still features the two step process, but the application and processing are easier and it works without a hooded dryer.
