Treatment FAQ

how much zinc is in stp oil treatment

by Thea Larkin Published 3 years ago Updated 2 years ago
image

I was told by a Oil Engineer some years ago that the STP ZINC PPM was around 1400. 1400 ppm is a nice safe number for flat tappet camshaft durability.Feb 11, 2019

Is STP synthetic oil good?

Jun 15, 2020 · Rislone Engine Oil Supplement with Zinc Treatment not only contains the correct amount of ZDDP, but also the other additives important to protecting your engine. Do not use as a break in additive. TYPICAL TEST RESULTS INDICATE:GASOLINE ENGINES With typical SN rated oil at a 7% dosage rate expect levels to be raised to a total of: Zn Zinc 1700 - 1800 ppm P …

How do you use STP gas treatment?

For starters, STP oil treatment, that little blue bottle you might have seen on AutoZone shelves, contains a considerable amount of Zinc necessary for an older engine. Two other more recent additions in many stores are the Hy-per lube Zinc additive, and Lucas engine break-in oil additive, which contains a massive amount of zinc.

Is STP gas treatment any good?

Dec 26, 2010 · The zinc levels in diesel oils has been decreased in the last year or so. It is generally acknowledged that a level of .11% or more (roughly equal to 1100ppm) is more than adequate. Mobil 1 15-50 gold top and silver top are both approx. 1200-1300ppm. The other place to look is Harley Davidson oils.

Is STP Oil Treatment good for your engine?

Dec 27, 2015 · This is for the op and really everyone since the myths and continual confusion about the zinc/phos. content in ALL oils is always questioned. In regards to the STP Oil Treatment...on "Bob's the oil Guy" forum one of the long time members says it has "1900 ppm zinc" ....which is a load IF it really has that content.

image

What is STP oil treatment made of?

zinc dithiophosphateSTP Oil Treatment contains zinc dithiophosphate as an anti-wear additive.

What oil has the most zinc?

Undoubtedly, Valvoline VR1 Racing Motor Oil contains the highest amount of zinc compared to other motor oil brands. The amount of zinc included in the Valvoline is 1400 ppm.Oct 11, 2021

Does STP Oil Treatment do anything?

STP® Oil Treatment (in the blue bottle) helps protect against engine wear with a high-viscosity formula, which fights metal-to-metal friction by providing a thicker cushion of oil between moving engine parts. It can be used in all cars, trucks and SUVs.

Can you have too much zinc in oil?

If you have too much ZDDP, you start to see corrosive wear and cause another problem. Adding an excess causes the oil to become acidic, and before you know, you're wearing cams, bearings and bushings because of too much ZDDP.Mar 22, 2019

How much zinc is in motor oil?

How Much Zinc Is Needed For Flat-tappet? Zinc must be between 1,200 and 1,500 parts per million (ppm) in race engine oils.Jan 26, 2022

Which motor oils have zinc in them?

CI-4, CI-4 Plus, and CJ-4 diesel oils typically have Zinc levels of 1100 parts per million (ppm) or more. The diesel oil is designed to be disperse and detergent to prevent soot contamination.Dec 31, 2021

How much STP oil treatment should I use?

Directions. STP® Oil Treatment Petrol should be added to the engine oil when the engine is warm, at a rate of one 300ml can to 3 litres of oil, or one 450ml bottle to 4 or 5 litres of oil (10% treat rate).

Does STP Oil Treatment thicken your oil?

STP® Oil Treatment fights this metal-to-metal friction by providing a thicker cushion of oil between moving engine parts, thus helping to protect against engine wear.

Can you use STP Oil Treatment with synthetic oil?

STP® Synthetic Oil Treatment delivers all the same benefits of our traditional oil treatment but has been re-formulated for use with low-viscosity oils. This synthetic based formula provides superior protection for today's longer drain intervals.

How much ZDDP is enough?

ZDDP is most effective if the concentration is between 0.18 and 0.2 % by weight. Tests have shown that concentrations above this amount, up to as much as several percent, have no effect except to prolong additive life.Nov 7, 2013

What does adding zinc to oil do?

The zinc oil additive in the motor oil will bond to metal parts of the engine, creating an anti-wear coat. This coating will be able to withstand the high pressure and keep your engine running smoothly.

How much zinc is in ZDDP?

Based on the 0.94:1 ratio of phosphorus to zinc in the ZDDP molecule itself, this range of phosphorus would give a zinc level of about 1900 to 2100 ppm.Jul 27, 2018

Ken Smith

Do not buy STP oil treatment for the purpose of Zinc or ZDDP additive. I made this mistake after reading the 15oz bottle stating it's first ingredient is Zinc.

grannyknot

I agree, I used to use zinc additives for my old engines until I started talking to this very knowledgeable oil guy at a car show, he wasn't trying to sell me anything, never even got his card, anyway he was explaining that the type of zinc that is used in aftermarket additives is the inexpensive stuff and isn't in a form that can really be used as a lubricant.

rossman

Yah, buyer beware! Lucas Engine Break-in Oil Additive - TB Zinc Plus is good stuff: 31,000 PPM Zinc

Ken Smith

I'm going to try the Rislone additive. Here is what they said after I sent an email requesting information on their additive:

TimO

Check out this article on the Driven Racing Oil website re zink in oil.

grannyknot

Check out this article on the Driven Racing Oil website re zink in oil.

rossman

My engine builder, Rebello recommended 1/2 bottle of Lucas TB Zinc Plus combined with a 50/50 mix of Motorcraft 5W-30 synthetic blend and Penzoil GT Performance Racing Oil 25W-50 engine oils.

How long does zinc stay in catalytic converter oil?

With the government setting mandates on manufacturers covering the service life of catalytic converters over 100,000 miles, this caused nearly every oil manufacturer over the last 10 years to slowly remove zinc from the ingredients in their oil.

Why do you need zinc in your engine oil?

Zinc acts as a friction inhibitor, and research suggests that older engines using “flat tappet” lifters in the engine (pretty much any V6 or V8 older than 1988) need to have zinc present in the engine oil in order to keep the camshaft and lifters from wearing prematurely.

What is zinc used for?

It’s also used to fight corrosion, as a galvanizing agent, is critical to create brass, and shows up in thousands of compounds that affect your everyday life.

Is zinc good for flat tappet engines?

Zinc is not only critical for older flat-tappet engines, but many argue it’s critical for new engine break-in. An engine’s break in period is critical for its long-term success, as everything from main and rod bearings, to rings, cams and oil pump are getting adjusted to their new life.

Does STP oil contain zinc?

For starters, STP oil treatment, that little blue bottle you might have seen on AutoZone shelves, contains a considerable amount of Zinc necessary for an older engine . Two other more recent additions in many stores are the Hy-per lube Zinc additive, and Lucas engine break-in oil additive, which contains a massive amount of zinc.

Does Valvoline have zinc?

Currently, very few oils on the market contain zinc – and all of these are designated as “off-road” oils, such as Valvoline racing oil. However, if you’re looking to add Zinc, there are of Zinc additives, that, when coupled with your favorite oil, provide the protection you need.

Does zinc affect catalytic converters?

Herein lies the problem. About 10 years ago, it was also discovered that in general oil consumption, Zinc, especially the phosphorus present in ZDDP, is a primary cause of premature catalytic converter failure. With the government setting mandates on manufacturers covering the service life of catalytic converters over 100,000 miles, this caused nearly every oil manufacturer over the last 10 years to slowly remove zinc from the ingredients in their oil. Diesel oils soon followed suit, until today, no oil that is approved for on-road use contains Zinc. This of course doesn’t affect newer engines with roller lifters or overhead cams at all – but for older engines – it limits the options for oils with ZDDP.

How many cylinders does a STP blue bottle have?

painted jester. The STP blue bottle for 8 cylinders contains less zddp then the STP red bottle for 4 cylinders. It only takes one bottle of the red for an 8 cyl. engine and about 1 1/2 of the blue bottles for 5 qt systems and you have good protection. GM dealers sell a very good zddp product for older vehicles.

How many bottles of red for 8 cyl engine?

It only takes one bottle of the red for an 8 cyl. engine and about 1 1/2 of the blue bottles for 5 qt systems and you have good protection. GM dealers sell a very good zddp product for older vehicles. And use it in their oil changes on older vehicles. Jester. P.

Does STP have ZDDP?

At my local Wal-Mart, STP has some oil additive in a blue bottle. Reading the back, you don't see "ZDDP", but it does say "zinc dialkyl dithio phosphates", which is the long form. If that's there, it's fine for use after cam/lifter break-in, but during break-in you need something better.

Is STP oil thick?

Other STP supplements are not nearly so thick. If you have to make do using the thick type STP (instead of motor oil that already contains enough additives, or a supplement like ZDDPlus, etc.), then I'd recommend using one step lower viscosity oil, i.e. 10w-30 instead of 10w-40, especially in winter/cold climates.

What is ZDDP oil additive?

One company ZDDPlus has developed specially formulated for older vehicles. The additive ZDDPlus replaces the zinc and phosphorus which has been reduced in most modern engine oil.

What is ZDDP in engine oil?

Zinc and Phosphorus (ZDDP) is an anti-wear component necessary in older engines. It has been reduced in most modern engine oils because of EPA standards and the reduced requirement for modern engines. Diesel and racings oils still have large quantities of ZDDP, both of which are formulated for a specific use.

Does ZDDP cause corrosion?

Too much ZDDP will cause corrosion.I think ZDDP has been overly coveted by older car fans...todays oils have far less,and todays oils are the best ever.There are plenty of other additives that work better than ZDDP.And the newest oils have it.

Does STP thicken oil?

STP is peculiar, it thickens the oil but does not seem to have any adverse affect on start up, if anything starts are better with it. Doesn't make sense to me.

The Best ZDDP Supplement You Can Buy

Engines in classic/muscle cars or any vehicle with a flat-tappet camshaft need more zinc (ZDDP) than today’s oils provide. Modern conventional oils lack the metal protection older or high-performance engines require. That’s why we created the Rislone Hy-per Lube ZDDP Supplement.

Product Details

Dosage: Use as directed in gasoline & diesel engines, antique & classic cars, motorcycles (4 stroke except wet clutch), tractors, agricultural & industrial machinery, and all racing applications.

Additional Product Info

Rislone Hy-per Lube Engine Oil ZDDP Supplement is a petroleum oil performance supplement “booster” containing high levels of ZDDP (zinc dialkyldithiophosphate) Zinc and Phosphorus additives along with mixed esters to help better protect internal engine components including pistons, flat tappet camshafts, lifters and the valvetrain.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9