Full Answer
How do you make ribbon ribbons for window trim?
Cut the fabric to measure the window. Allow 2 extra inches for the width and 3 1/2 extra inches for the length of the fabric. Pin one strip of ribbon across the width of the fabric 8 inches from the top. Attach another strip of ribbon to the other side of the material so that the ribbons are matched up on opposite sides. Sew the ribbons in place.
How do you use grosgrain ribbon for window treatments?
Place two lengths of grosgrain ribbon over each rod to gather the fabric. Get help to gather the bottom of the fabric to the desired height and secure one ribbon with a knot or a bow. Tie the second ribbon at the same height. Add light control and maintain your privacy in style with this window treatment project.
What size ribbon should I get for my project?
Size your ribbon. You'll need to decide how large you want your ribbon to be. Most simple awareness ribbons that people wear are 1/4" thick. Depending on your method and material, this make take some trial and error.
How many bubbles should I put in my ribbon?
Depending on how wide/thick your ribbon is, you may want to have 5-7 “bubbles” between each divider, or if you want a really full and ruffly look, you can have more like 8-10 “bubbles” in each section. Also, the shorter the ribbon is between pipe cleaners, the more bubbles you’ll likely need to cover up the wire.
How do you make ribbon curtains?
0:031:00How to make a ribbon curtain/photo backdrop - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is simply on a cane at the top and then stitched or pinned or tied these ones are tiedMoreThis is simply on a cane at the top and then stitched or pinned or tied these ones are tied finishing with lovely bows. This one here is an org and II just simply tied at the top.
How do you put ribbon trim on curtains?
0:151:24Ribbon for Drapery Edging : Fashion Crafts & More - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have your tape ironed on wait until it's cool and then once it is peel your paper. Off theMoreOnce you have your tape ironed on wait until it's cool and then once it is peel your paper. Off the next step is to take your ribbon. Facing up and lay it on top of the adhesive tape.
How do you make tab top curtains with ribbon?
Ribbon – Tabbed Curtain TutorialMeasure one inch and fold over .Iron the fold.Fold over again another inch.Iron the fold again.Pin along the edge to secure it.Sew with 1/4” inseam down the whole side of the curtain. Repeat these on all the sides of the curtains – not the top and bottom!
How do you make Roman shades with ribbon?
2:324:11Sewing with Flames: Easy Custom Roman Shades - YouTubeYouTubeStart of suggested clipEnd of suggested clipI need one half of my ribbon to be in the front and the other half to be in the back. And I want twoMoreI need one half of my ribbon to be in the front and the other half to be in the back. And I want two of these you want it about 25% of the way in. So right about here for me.
How many yards of curtain trim do I need?
Between 6 and 8 yards of trim depending on the length of your panels. Iron on tape. Iron.
How wide should curtain trim be?
I prefer trims that are minimum 1 ½ inches wide so that they can be admired from across the room. Look for embroidered patterns or ones that add a dash of color. Tassels or pom poms are fun too.
How do you measure for tab top curtains?
How to Measure: Tab Top CurtainsMEASURE LENGTH. Measure from the top of the rod down to where you want the curtain to fall. ... MEASURE WIDTH. The curtain width should measure 1 ½ the width of the window for fullness.STYLING TIP. We suggest a decorative curtain rod because the rod will be visible between tabs.
How do you make slot top curtains?
5:176:34How to make tab top curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen the fabric and iron the tabs. So they face upward. Then fold back the facing and iron againMoreOpen the fabric and iron the tabs. So they face upward. Then fold back the facing and iron again before sewing the bottom edge of the facing panel in. Place.
How do you make a simple tab top curtain?
InstructionsCut the Panel Fabric. The length and width of your curtain panels will depend on the size and placement of the windows, plus the hem allowances. ... Determine Tab Length. ... Cut 'Em Out. ... Finish the Panel Edges. ... Attach the Tabs. ... Attach the Facing. ... Press the Facing. ... Sew the Facing.
How do you measure fabric for Roman shades?
Measure the height and width of your window. If you want space on either side of the shade, determine how much room you want to have and subtract that from your width. These will be your finished shade dimensions.
How do you make a simple Roman shade?
0:1112:14How to sew a DIY ROMAN SHADE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSize so let's get started to begin measure the height and the width of the window that you want toMoreSize so let's get started to begin measure the height and the width of the window that you want to create the roman shade for you can mount the shade on the outside of your window frame or the inside.
Is it hard to make a Roman shade?
It's actually very easy. You need a few things such as fabric, fabric shears, drapery rings, a board for mounting, liner fabric, an iron, a staple gun, a dowel, and a sewing machine.
What are window valances for kids?
Kids’ rooms offer a place to bring in color and fun. Simple window valances made in a colorful fabric tied up with bright ribbon offer simplicity and fun in one. The panel itself is just fabric hemmed on all sides. Ribbons, sewn at different points along the top, tie up to the curtain rod for the easiest installation possible.
How to make a window look shabby chic?
Layering linen and lace can give any window a shabby chic look for mere pennies. Linen is a low-cost fabric you can find just about anywhere. Drape it around the window and play with its lines until you find the right look. Staple it in place, add some fabric roses for an upscale touch.
How to make a Roman shade?
Combine a sophisticated fabric with a simple mini-blind to create your own Roman shade. Remove most of the slats, leaving the remaining ones evenly spaced. Sew a lining to the back of your fabric of choice, then glue it to the mini-blind.
What is balloon shade?
Balloon shades, done in a fun fabric, is a perfect addition to any child’s room. The gentle curves of this DIY window treatment give it a subtle sophistication, but the tassel border adds a bit of whimsy. It’s the perfect project if you want to cover a plain roller shade or mini-blinds while introducing a pop of color to the room.
Can you use window treatments for decorative purposes?
You can use window treatments for purely decorative purposes to enhance your décor, but don’t forget the functionality; privacy curtains let in light but keep the eyes of passers-by out, black-out shades let you sleep peacefully even after sunrise, and a variety of adjustable shades allow you to adjust light as the sun moves lower in the sky in the afternoon. Whatever your needs, from full-length curtains to tie-up shades to valances, we have DIY window treatment ideas for every taste, style, and function.
Step 1
Cut the fabric to measure the window. Allow 2 extra inches for the width and 3 1/2 extra inches for the length of the fabric.
Step 2
Pin one strip of ribbon across the width of the fabric 8 inches from the top. Attach another strip of ribbon to the other side of the material so that the ribbons are matched up on opposite sides. Sew the ribbons in place. These will act as an anchor for the valance ties.
Step 3
Create the rod pocket by folding the material 1/2 inch at the top. Iron the 1/2-inch fold. Fold the fabric again 2 inches and iron. Use straight pins to hold the rod pocket in place. Sew the seam allowing a 2-inch space for the curtain rod.
Step 4
Fold the left side edge of the fabric 1/2 inch and iron in place. Create another 1/2-inch fold and press with iron. Secure with straight pins and sew. Repeat for the right side and bottom portion of the fabric.
Step 5
Cut four pieces of ribbon of equal size to serve as ties for the valance. The ribbons should measure the length from the anchor ribbons attached earlier to the bottom hem of the fabric.
Step 6
Sew the end of one ribbon, 6 inches from the edge of the fabric, to the anchor ribbon on the left front side. Attach another end of ribbon to the anchor ribbon on the right front side 6 inches from the edge. Repeat with the other two ribbons on the opposite side, and your curtain is ready to be converted into a tie-up valance.
How to make a ribbon wreath?
To make a ribbon wreath, you’ll need: 1 a wire frame (I like to buy these at the Dollar Tree, but you can also find them at craft stores.) 2 Ribbon, of course! Probably around 12 yards (see FAQs near the end of this post) 3 Pipe cleaners, wire, or zip ties (optional) 4 Scissors
What kind of ribbon should I use for a wreath?
I would suggest using a few different widths, with a nice wide ribbon in the background and maybe a few more narrow ribbons as accents. Wired ribbon is probably the most common type for making ribbon wreaths, as the wired edges make it easier to twist and poof and hold the shape you want.
How wide is a wire wreath?
For regular ribbon (2-4 inches wide), you’ll probably want to alternate (zig-zag) which wires you attach to. The “bubbles” will scrunch up as you go along, which helps cover the wire frame. Wire wreath forms also have 6 perpendicular/dividing wires to give support.
What is the bubble method?
The first technique I tried is the bubble method. The result is a poofy, bubbly effect with the ribbons. It works best with wider ribbons (so you can cover more of the wire frame when you fluff the bubbles out).
Can you put pipe cleaners under a wreath?
When you’re finished, just make sure to tuck the pipe cleaners in, and maybe secure them underneath the wreath so they don’t peek out. This “bubble” method is nice because you can continue to add more accent ribbons or embellishments on top of the bubbles, and use the existing pipe cleaners to attach them.
What can you use to personalize ribbon?
You can also use markers or paint, especially on paper and card stock ribbons.
How to make a figure 8 with ribbon?
You'll need to fold your ribbon. Fold one half over the other half and leave an "eye" in the middle to form the classic ribbon shape. When complete it will look like a "Figure 8" with one end open. You can use a tiny bit of craft glue or tape between the two halves to stick them together and preserve the shape.
How thick should ribbon be for awareness?
You'll need to decide how large you want your ribbon to be. Most simple awareness ribbons that people wear are 1/4" thick. Usually you will want ribbons that are placed on doors or windows to be larger though. Depending on your method and material, sizing make take some trial and error.
Why do you use paper and card stock for ribbon?
Since the ribbon won't be worn and won't be moving much , paper and card stock are both cheaper and easier to make large ribbons out of. Paper or card stock reasons are also easy to add additional colors to - just use a marker or paint.
Why do we wear awareness ribbons?
Awareness ribbons are a simple way to show support for something and are often worn on days dedicated to specific causes. Wearing an awareness ribbon can help serve as a conversation piece as well. You have the opportunity to educate about what the symbol stands for , as well as demonstrate empathy for and solidarity with a particular cause .
Why do people wear ribbons?
Often, ribbons are worn in honor of someone you know. For instance, a relative that passed from a type of cancer. Ribbons are also worn to demonstrate solidarity with a particular group, for instance Black Lives Matter or the LGBT community. Check your sources carefully.
How thick is awareness ribbon?
Most simple awareness ribbons that people wear are 1/4" thick. Depending on your method and material, this make take some trial and error. When using ribbon or fabric and folding it into your shape, you'll want to cut a band between 2.5x and 3x the total length of the completed ribbon.
