How much does a concrete slab cost?
· The national average cost of slab leak repair as of 2014 was $2,000. However, slab leak repair Indianapolis can be as low as $300 for a simple fix and as high as $8,000 if there is serious damage and it requires pipe re-routing. However, despite the high costs, you need to have slab leaks repaired immediately.
How much does it cost to fix a slab leak?
Average Cost per Square Foot. $8.54. $10.45. Service Pros Edit, Print & Save this in Homewyse Lists. Create your own price list in Homewyse Lists. For a basic project in zip code 47474 with 120 square feet, the cost to Remove a Concrete Slab starts at $9.49 - $11.53 per square foot*.
What do you need to know about slab removal?
The cost of such treatment can run anywhere from $1500 to tens of thousands depending on the square footage, number of stories, and other factors that can make treatment more complicated and labor intensive. ... Crawlspace: Like a floating slab, treatment for this kind of construction is more labor intensive and as a result, more expensive. Layout
How much does it cost to repair concrete floors?
The average cost to polish existing concrete floors is $3 to $15 per square foot, depending on the job size, prep work, and complexity. Concrete surface repairs and design, stamping, staining, and sealing work can add $1 to $10 per square foot or more to the overall cost. Get free estimates from contractors near you. View Pros Size & Area of Floor
Can I treat termites myself?
Some of the best ways to get rid of termites is to apply termite-killing products to your home's exterior, use direct chemicals on the inside of your home, set up termite baits, and spray boric acid in your floors and walls.
What is slab treatment?
A "slab" is a type of concrete foundation that does not have a basement or crawlspace. To control a termite infestation underneath the slab, a pest control professional typically will recommend a termiticide treatment that can be applied through rods reaching under the house or holes drilled in the slab.
Is Tentless termite treatment effective?
Although both tenting and tentless methods are effective termite treatments, it's very clear that tentless is best in many situations. This treatment process is much less disruptive, uses organic components instead of poisonous chemicals, and is better for the environment.
How much does Xtermite cost?
You may pay a flat rate of $1,200 to $2,500 or more, depending on the size of the house, or by linear foot, around $5 to $20 per linear foot.
Can you have termites on a slab?
In fact, termites can go hide in the walls of slab homes much longer before we discover them leading to more termite damage than with a house with a crawlspace foundation. The termites in our area are subterranean, meaning that they live in/under the ground.
How do you treat termite slabs?
Concrete Slabs should be treated with Termidor SC. This job is much easier if the treatment is applied under the slab BEFORE it has been poured. If the slab is already in place, the chemical can be injected through a drill hole, though this may require the help of a professional.
Can you treat termites without fumigation?
Baiting systems, spot treatments, liquid termiticides (Termidor), soil treatment, wood treatment, orange oil, and even heat or cold treatments are all methods that have been used as alternatives to fumigation to varying degrees at success.
What is the most effective termite treatment?
1) Liquid termiticides This is one of the most major ways of termite control that can be done by yourself at home. This treatment is designed to stop the entry of termites into our home structures from outside. Liquid termiticides generally give you faster results.
What is the safest termite treatment?
Because of their precise delivery system and the small amounts of actual pesticide used, termite baiting systems are generally perceived as the “safest” of the available termite treatment methods.
What is the best treatment for subterranean termites?
Trenching, rodding and treating is the most common method of Subterranean termite extermination. This chemical barrier prevents termites from accessing your home through the soil. Drilling and treating the soil is a great way to put a defensive barrier between the slab of your home and Subterranean termites.
How much does termite tenting cost in California?
The average cost to tent a house for termite fumigation ranges from $1,280 to $3,000 or $1 to $4 per square foot depending on the level of infestation. The second option for the entire home is heat treatment which usually costs between $1 to $2.50 per square foot with most homeowners paying about $800 to $2,800.
How long does it take to get rid of termites?
Generally speaking, most infestations take about fourteen days to terminate. A heavy infestation can take up to eight weeks. These timelines are of course for professional exterminators.
How do you repair a damaged slab?
2:215:16How To Repair Concrete | Pro Tips For Repairing Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the same bonding product to the broken edges of the side wall making sure to get into all ofMoreApply the same bonding product to the broken edges of the side wall making sure to get into all of the crevices mix. Up your concrete patch with water and add some of the bonding product to the mix.
What do you spray on termites before pouring concrete?
Our most popular product is Dominon 2L for termite treatments. You should treat the entire area before they pour the slab. This is called a pre-treat. You should apply the product at a rate of 1 gallon per 10 square feet.
What causes cracks in slabs?
What are the causes of cracks in reinforced concrete slabs? Several factors like poor concrete quality, improper structural design, inappropriate steel bar spacing, insufficient concrete cover, large slab span, improper aggregates, and inadequate curing regime are responsible for the development of cracks in RCC slabs.
How do you repair a cracked slab?
Wide cracks in concrete are best patched and sealed with a concrete patching compound. Smaller cracks, less than 1/4 inch wide, can be repaired with a concrete caulk or liquid filler. Patching compounds typically are mixed with water and applied with a trowel.
How much does a concrete slab cost?
Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Who gets better prices on concrete slabs?
Concrete Contractors or, Mason companies will most always get better prices on Concrete Slabs — saving your back and additional costs of Concrete Slabs materials, so shop around, ask your neighbors if they can recommend someone.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Can you install concrete slabs yourself?
Installing Concrete Slabs isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a Concrete Contractor or, mason company to perform the work for you. Concrete Contractors or, Mason companies will most always get better prices on Concrete Slabs — saving your back and additional costs of Concrete Slabs materials, so shop around, ask your neighbors if they can recommend someone.
How much does it cost to fix a slab leak?
Most likely, you will want to find a leak detection specialist to find the location of your slab leak repair spot. You should be able to find a quality specialist for around $150-$400. Slab leaks are very difficult to fix on your own and attempting to do so can lead to more severe damage to your property. When faced with a slab leak, it is best to leave the DIY book on its shelf and call a plumbers professional in Indianapolis area. The professionals have several different options for fixing a slab leak:
How much does it cost to fix a slab leak in Indianapolis?
However, slab leak repair Indianapolis can be as low as $300 for a simple fix and as high as $8,000 if there is serious damage and it requires pipe re-routing. However, despite the high costs, you need to have slab leaks repaired immediately.
Why is it important to detect a slab leak?
It is important to detect a slab leak repair early, so it does not cause major damage. Once the slab leak is detected, it is important to act quickly. Each day you wait contributes more to the damage, raising repair costs.
When is a slab leak repaired?
Slab Leak Repair is needed when you have signs of a leak. A slab leak repair is needed when water leaks below the concrete slab upon which your house sits. Slab leaks can have many causes, lead to significant damage, and become very costly to repair. It’s important to discover you need a slab leak repair.
What causes a slab to leak?
The most common causes of slab leaks are: Ground Shifts: Over time, the massive weight of a house takes a toll on the. concrete slab and the earth on which it was built, leading to the slab settling and. the ground shifting.
What happens if you leak a slab?
Slab leaks can lead to mold, which can lead to deadly respiratory issues and cause major structural damage to your home by rotting supporting structures. At the first sign of any potential slab leak, it is best to bite the bullet, call an experienced plumber, and rectify the situation immediately.
Can a slab leak cause major damage?
causing a subtle electrical reaction that erodes the pipes until they leak. It is important to detect a slab leak repair early, so it does not cause major damage. Once the slab leak is detected, it is important to act quickly.
How long does it take for a concrete slab to cure?
Replacing the slab also takes longer than either concrete lifting method. New concrete needs to cure, which can take days or weeks, de pending on the location and weather conditions. If you replace the concrete but don’t address the cause of the original issue, this new slab may crack and shift just as the old one did.
How much does slabjacking cost?
You can estimate your potential slabjacking costs yourself, if you’d like! Generally speaking, the cost is $10 per square foot. If you need a quick refresher course on calculating square footage, Nolan can explain:
What is slabjacking in concrete?
Slabjacking is a form of concrete leveling. Small holes are drilled through the slab, and a fill material is injected through these holes into the space below the slab. As this void is filled, the injected material lifts the slab up. The most advanced slabjacking uses polyurethane foam as the injection material.
What is a concrete slab made of?
The concrete slab must be entirely made of concrete. The lifting process does not work for any other type of material- brick pavers, tiles, asphalt, etc.
What to do if you have a broken drain?
If you have a broken pipe or drain, these can also be the source of the issue. Repairing plumbing, extending downspouts, or rerouting drainage lines can resolve the situation, and allow the lifting repair to be a more permanent solution.
Can you lift a broken concrete slab?
If the slab is broken into multiple pieces, severely cracked, or deteriorated, lifting may not be possible or feasible. A good contractor will be able to evaluate the concrete and recommend the best course of action for you.
Is it cheaper to tear out concrete or re-pour?
Another option is to have the damaged concrete torn out and re-poured. This is more expensive than slabjacking; the cost for demolition and replacement can cost twice as much as slabjacking.
What is the labor required to remove concrete slab?
Basic labor to remove concrete slab with favorable site conditions. Jackhammer concrete into movable pieces. Remove all concrete and reinforcing material. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup.
How to estimate project cost?
To estimate costs for your project: 1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased. 2. Specify Project Size and Options Enter the number of "square feet" required for the project. 3.
How much does it cost to treat dry wood termites?
Click here for more information and images of termite droppings or frass. Treatment for this species of termite will likely require “tenting” the structure. The cost of such treatment can run anywhere from $1500 to tens of thousands depending on the square footage, number of stories, and other factors that can make treatment more complicated and labor intensive. There are also preventative treatments for dry wood termites that can be performed during the construction process. These can run from $500 to $2000. They will typically come with a lifetime guarantee, involve minimally toxic or mineral based chemicals, and are far less of a hassle for the homeowner than a post-construction treatment.
Is crawlspace more labor intensive?
Crawlspace: Like a floating slab, treatment for this kind of construction is more labor intensive and as a result, more expensive.
Can termites live in concrete block?
Block: Though at a lower risk for term ites than a wood frame structure, concrete block homes still commonly become infested with termites in the attic and interior walls which are usually wood frame .
Is post construction treatment more expensive than dry wood?
Treatment of structures post-construction is significantly more, but still generally less expensive than treatment for dry wood termites. The cost of a post-construction treatment for subterranean termites will vary greatly based on construction techniques and the amount of drilling required. A general range for this kind ...
Does drywood termite treatment increase?
Treatments for Drywood Termites will increase with additional levels. Lots of concrete or pavers: For Drywood Termites this shouldn’t be a factor that affects the price. For Subterranean Termites, however, it can significantly increase the cost of treatment.
How much does a polished concrete floor cost?
The cost of polished concrete floors is $3 to $12 per square foot vs. tile flooring costs $7 to $24 per square foot. Polished concrete floors can be stamped to look like most tiles and are water-resistant. Natural stone, like slate, offers more skid resistance than polished concrete.
How much does it cost to install polished concrete countertops?
Polished concrete countertops cost $60 to $130 per square foot to install, which is similar when compared to granite countertops at $50 to $200 per square foot. Prices depend on the design, colors, gloss polished level, edging, stenciling, stamping, and inlays.
How much does screed flooring cost?
Polished screed flooring costs $2 to $5 per square foot , depending on the condition of the concrete. Screed is a thin concrete overlay that's poured over the slab to create a level, smooth, insulating, durable, and protective surface necessary for grinding and polishing.
How much does it cost to install a cement board over a concrete floor?
Installing a cement underlayment adds $2 to $5 per square foot to the total cost of the polished concrete floors.
How much does it cost to polish a basement floor?
Polished concrete basement floors cost $3 to $12 per square foot or between $2,000 and $8,000 on average. By polishing the basement floor, the substrate, although dense, remains breathable, and the reduced moisture vapor eliminates mold and mildew growth. Polishing concrete also adds brightness to a basement if highly honed.
Why use polished concrete?
Polished concrete is used inside and outside the home due to its affordability, resiliency, and durability. It's an excellent option for kitchens, bathrooms, basements, patios, driveways, and garages.
How much does a precast concrete wall cost?
Polished precast concrete walls or block panels cost $10 to $60 per square foot, depending on the size, shape, and thickness of the wall, and whether it's on grade or above. An alternative is adding concrete micro-topping to vertical surfaces (drywall) for $1.50 to $2.00 per square foot.
How much does it cost to stain concrete?
The cost of staining an interior concrete floor varies depending on the level of stain. A single color over the entire floor at once costs about $2 per square foot. If you choose to do a more intricate stain, a layered stain to mimic stone, or use stencils, your costs per square foot can approach $25 per foot.
How much does it cost to stain a basement floor?
Stains can be layered on one another to give your basement floor depth and interest. Stains have a wide range of costs depending on the type. A single coat of stain in a solid color is around $2 per square foot. An intricate design that uses stencils or creates a pattern with different colors can cost as much as $25 per square foot. The average basement is around 1,000 sq. ft, making the cost of staining it between $2,000 and $25,000, depending on the stain you use.
What is the best way to stain concrete?
By building up the stains in layers, you give the floor a wide variety of different appearances, from a texture that resembles stone and wood to stenciled finishes in intricate patterns. In most cases, the stained floor is topped with a high gloss finish, giving it a polished, refined appearance.
How much does epoxy cost per square foot?
The epoxy garage floor cost per square foot is around $10 to $15 a square foot . For a two-car garage, this comes out to around $5,760 to $8,640. If you don’t use your garage for car storage, you can use other types of concrete coatings.
How much does concrete paint cost?
Concrete paint prices start at $30 to $50 per gallon or around $2 to $4 per square foot installed.
How long does concrete last?
Concrete lasts for many years, but it needs to be properly cared for to prevent cracks, staining, and wear and tear. Part of that care is either sealing or coating your concrete floor with a long-wearing topcoat. You can coat your concrete floor in many different ways.
What section was updated with information on concrete repair?
The enhancements section was updated with information on concrete repair.
How much does it cost to bait a house for termites?
A termite baiting system costs between $6 and $10 per linear foot, or $960 to $1,600 for treatment on a 1,600 square foot house. For this treatment, your treatment specialist will set up bait stations every 15–20 feet around your home and monitor them every 30 to 90 days to see if the poison is being ingested by termites in those areas. Baiting is a critical element in killing the whole colony.
How much does termite bait cost?
Termite control using bait systems or chemical treatment costs between $5–$12 per linear foot or about $550 for the average infestation. The total price depends on the linear footprint or the length of the walls and perimeter infested in the home.
How much does it cost to fumigate a house?
The average cost to tent a house for termite fumigation ranges from $1,280 to $3,000 or $1 to $4 per square foot depending on the level of infestation. The second option for the entire home is heat treatment which usually costs between $1 to $2.50 per square foot with most homeowners paying about $800 to $2,800.
Does insurance cover termite removal?
No. According to Esurance “Homeowners insurance doesn't normally cover termite damage or removal. That's because termite infestations can typically be prevented through routine home maintenance, which homeowners are responsible for.”
How Much Does A Concrete Slab Cost?
Additional Cost Factors
- Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80per square for materials and installation.
- Colored concrete will cost you an extra .75 – $1.25per square added to a basic concrete mix.
- Sub-base preparation – this runs on average .60 – $1.25 per square footand involves site-wo…
- Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80per square for materials and installation.
- Colored concrete will cost you an extra .75 – $1.25per square added to a basic concrete mix.
- Sub-base preparation – this runs on average .60 – $1.25 per square footand involves site-work prep: Grading, compacting the top-grade, 2″x4″ or 2″x6″ wood forms, 3/4 crushed stone and installing wi...
- Concrete Mix – Concrete costs an average of $100 per cubic yardaccording to NRMCA
Concrete Slabs – Pricing and Installation Cost Checklist
- Expect the Concrete Slabs prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
- Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
- Try to budget and additional 7-15% more on top of what our calculator gives out for Concret…
- Expect the Concrete Slabs prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
- Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
- Try to budget and additional 7-15% more on top of what our calculator gives out for Concrete Slabs costs.
- Visit every supply house that sell your particular brand of Concrete Slabs and try to negotiate a better price with each supplier – I save on average 20%.
An Overview of Slabjacking
Alternatives to Slabjacking
Limitations of Slabjacking
What Does Slabjacking Cost?
- The job minimum for this process is $2000 (price includes labor and materials). At Acculevel, we define the “job site” as your entire property. This means that if you have multiple places around your home that need repair, we will combine all of these to meet the minimum cost. For example, you may have a patio in your backyard, and two steps leadin...
Additional Costs to Consider
Have Concrete That Needs Repair? The Next Step