This answer tells you how much pool shock you need to add. A good rule to remember is to use one bag of shock (1 gallon of liquid chlorine) per 10,000 gallons. Too Much Shock?
Full Answer
How much shock do I put in a 10000 gallon pool?
For a 10000 gallons swimming pool with no issue, the recommended is 1 lb. of pool shock. If there is a presence of visible algae, use 2 – 6 lb. of pool shock for the same volume of water.
How often should you Shock Your pool water?
The frequency of pool shocking isn’t set in stone, and it really only needs to be done when your water starts going haywire. Some things you’ll be able to visually see (ie. cloudy water, algae turning it green), but most water pollutants will be invisible.
How much shock does it take to remove pathogens from pool water?
The amount of shock needed to remove pathogens is dependent upon the level of pathogens in the water. You can test for bacteria with a bacteria test kit, or you can just shock the pool to 30 ppm. Bacteria, fungus, protozoa, viruses and even parasites can enter the pool water from swimmer waste or from organic contaminants.
How do you test pool water before adding shock treatment?
Before you add shock treatment, you need to test your pool water and balance its levels. The pH level should be between 7.2 and 7.6, with total alkalinity being between 80 and 120 ppm. Pool water testing is easy to do using test strips or liquid test kits. They give you quick and accurate readings regarding the chemical levels in the pool.
How many bags of shock do I need for my pool?
A good rule to remember is to use one bag of shock (1 gallon of liquid chlorine) per 10,000 gallons.
How much pool shock do I put in my pool?
Often, it will look something like this. 12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water.
How much will one bag of shock raise chlorine?
One bag of In The Swim cal hypo is always 1 pound, therefore, you need three bags to triple shock a 10,000-gallon swimming pool and get rid of algae. *For liquid chlorine or sodium hypochlorite with 12.5% chlorine, add 10 ounces for a 10,000-gallon pool to raise free chlorine (FC) by 1 ppm.
How much shock should I put in my pool weekly?
You should use two pounds of shock for every 10,000 gallons of water that's in your pool. This will assure that your pool gets the right amount of chemicals to treat it properly.
How many hours should you wait to swim after shocking a pool?
24 hoursAfter Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
Can you put too much shock in a pool?
Can you put too much shock in a pool? SKIMMER NOTES: It's unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you're safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.
How much shock do I add?
Typically for granular shock, you'll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn't a one-size-fits-all answer.
How long should you run filter after shocking pool?
While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.
What do you do after you shock your pool?
Answer: After shocking the pool, it will need filtration and circulation. Run the pump as much as possible. Keep the filter clean (daily) until the water runs clear. Be sure to brush the pool often during this process as above-ground pools do not have drains at the bottom.
How long should I run pool pump?
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
What happens if you swim in a shocked pool?
6 days agoWhat Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.
Is shock the same as chlorine?
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
How to shock a pool?
How to Shock the Pool 1 Clean the Pool. Leaves and debris on the floor and surface will waste your chlorine’s killing power, as it attacks these organic materials, rather than the A-B-C problem that we are trying to correct. 2 Lower the pH. Chlorine is very sluggish at high pH levels. At a pH of 8.0, less than half of the chlorine you add to the water will convert to hypochlorous acid, the killing form of chlorine. Lower the pH to 7.2 before shocking. 3 Read the Label. We have 8 different types of pool shock, all with slightly different dosages. For some pool shock, dilution in a bucket is necessary to dissolve the granules, to prevent damage to pool surfaces. 4 Add the Shock. Distribute the granular chlorine throughout the pool surface, with the pool pump running. Be careful not to spill any on your clothing or the pool deck, and don’t broadcast it into the wind! 5 Brush the Pool. This helps to distribute the chemical, and removes the layer of dust and film on your pool surfaces, which may allow some contaminants to escape treatment. A good brushing, vacuuming and backwashing should follow an algae shock treatment.
What can enter a pool from a swimmer?
Bacteria, fungus, protozoa and viruses and even parasites can enter the pool water from swimmer waste or from organic contaminants. Chlorine pool shocks in the correct amount kill these organisms by attacking the cell wall, which exposes vital cell constituents and terminates cell function.
What is the level of chlorine in a pool?
For a level at 0.3 ppm CAC, add enough chlorine to reach a level of 30 ppm in the pool. Chloramines, also known as Combined Chlorine, occur when a chlorine molecule combines with ammonia or nitrogen in the pool water. The attachment makes the molecule sluggish, and it becomes ineffective as a sanitizer.
How to remove algae from pool?
Using mechanical methods is usually necessary – brushing the walls and floor, vacuuming and backwashing, to remove algae cells from the pool, and flush them out of the system . 2). Kill Bacteria.
What is free available chlorine?
Free Available Chlorine (FAC) is an attractive target for ammonia and nitrogen that gets into the pool water. When combined, FAC becomes ineffective as a sanitizer and causes eye irritation, or red eyes.
How much chlorine should I use to remove chloramines?
To effectively remove chloramines, many sources say that you need 10x the amount of combined chlorine, but for complete removal I may double that amount, to compensate for stabilizer (cyanuric acid) levels, or after active pool use, or when treating algae.
What is a pathogen in a pool?
A pathogen is a disease-causing substance. Bacteria, Viruses and Parasites can live in pool and spa water. Your normal sanitation and filtration likely removes most pathogens, but if you want to be sure – a good pool shock would be in order.
How many gallons of shock to superchlorinate pool?
As discussed earlier, the bigger the pool, the more bags of shock that will be required to superchlorinate the water. If this sounds like your pool (anything 30,000 gallons and up), repeat this process as necessary.
When to use shock treatment in pool?
You’ll also want to apply shock treatment when opening the pool, and closing it down for the season. On opening, after you’ve balanced it’s pH level, shocking will sanitize and oxidize the pool, restoring its clear water. On closing, pool shock is used as a disinfectant to prepare the pool for the winter months.
How to know if your pool is in shock?
Chloramines irritate your eyes, nasal passage, lungs, and skin. If the pool has a very strong chlorine smell to it, you know it’s time to shock. Clearing up cloudy water: Pools can get cloudy from insufficient chlorine, or an abundance of chlorine. The sweet spot for chlorine levels is between 1 and 3 ppm.
What is non chlorine shock?
Non-Chlorine Shock: Also known as Potassium Monopersulfate (MPS), this is a chlorine-free shock that oxidizes contaminants, but won’t rid the pool of bacteria. Compared to chlorinated shock, you can use MPS shock at any time of day and be swimming in the pool 15 minutes later.
What is pool shock?
Pool shock is a “super dose” of granular pool chlorine that oxidizes chloramines (combined chlorine) and kills bacteria in the water. Shocking depletes combined chlorine and increases free chlorine . If your chlorine levels are low, a chlorinated shock is required.
How many volts does a pool shock?
As a pool owner, you’re gonna need to learn how to shock a pool. Pool shocking doesn’t mean sending 5000 volts of electricity through the water (although that would be pretty cool to see). However, what it does refer to is the rebalancing of pool chlorine levels, keeping the pool water safe to swim in.
How to test pool water for shock?
Step 1. Test & Balance Your Water. Before you add shock treatment, you need to test your pool water and balance its levels. The pH level should be between 7.2 and 7.6, with total alkalinity being between 80 and 120 ppm. Pool water testing is easy to do using test strips or liquid test kits.
How often should I shock my pool?
If the pool is heavily used it’s highly recommended to shock dose your pool every week. If you do not regularly use your pool than shock dosing at least once every two weeks will maintain a healthy water environment. Pool owners should ensure they have a maintenance schedule, this will help to regulate the cleanliness and correct chemical levels ...
Why do you shock dosing a pool?
It will ensure a clean, healthy swimming pool by preventing and eradicating issues such as bacteria and algae growth.
How to get pool water back to top quality?
How to Resolve Cloudy Water. To get your pool water back to top quality you will need to deep clean your pool and shock dose the water. Here are some simple instructions to help: - Remove any large debris with a heavy-duty skimmer. - Brush down the walls with a stiff pool brush.
What are the things that deplete chlorine in a pool?
They play an important role in maintaining a clean, healthy swimming environment. Natural debris such as leaves and other solids that enter your pool such as sweat, sunscreen, urine, algae and beauty products will deplete the chlorine levels.
What is the recommended chlorine level for an outdoor pool?
Chlorine or Bromine Chemical Levels. Outdoor pools require a reading of 3-5ppm. If a swimming pools chlorine or bromine levels are not maintained and tested regularly this can entail insufficient sanitisation, leading to bacteria and algae growth. A solution to this particular issue is to shock dose the pool.
What does a chlorine shock do to a pool?
The short term raise in chlorine will help break down any organic waste such as bacteria and other contaminants such as algae, slime and loss of water clarity or quality. For a guide on how to shock dose your pool, you can refer to the guide at the end of this article where you will find information appropriate to the size ...
How to clean algae from pool?
To remove the algae and clean your pool you will need to: - Set the valve on your filter to ‘waste’ and vacuum the pool with your pool vacuum. - Brush down the walls with an algae pool brush. - Shock dose the water. - Run the pool filter until the water is completely clear, this can take a few days. - Test and correct the water chemistry levels of ...