What kind of drill do you use to drill termite holes?
Drilling holes termite controll in the first place is simple. You should use a drill with a fitting head. For example, if drilling through wood – use something lighter and softer, otherwise, while drilling through materials like concrete, be sure to use something more serious,...
How many inches of trench does termite treatment take?
Traditional termite treatment uses a six-inch trench to make sure the termite treatment gets down to where the termites live.
Can termites get in through drilling?
Drilling into the slab is a good way to reach termites. Holes can also be drilled directly into infested wood, which is another way of reaching termites directly. Some of the other ways termites can infest your home is by getting into your crawl space or burrowing into your home through the soil along the foundation.
How do you use rodding for termites?
With rodding, after the trench is dug, a rod is inserted, to make a hole every twelve inches or so that’s afoot deeper than that six-inch Termiticide is poured into the trench, it flows down into those deep rod holes, providing some additional termite protection to the property. Drilling Drilling means exactly what you’d think it means.
Is drilling necessary for termite treatment?
Answer: The answer to this question is also in our How To Do A Termite Treatment Article. For your garage, porch, patios, or other contiguous slabs against the home, you will need to get the termiticide underneath the concrete against the foundation. To do this you will need a hammer drill with a 1/2" x 18" drill bit.
How deep should trench be for termite treatment?
Soil treatment for termite entails digging a six-inch-by-six-inch trench around the perimeter of the home, applying the solution to the soil, and allowing it to rest before replacing the excavated soil.
How long does drilling for termites last?
On average, termite treatment lasts about 5 years. Liquid termite treatment can last five years or more, whereas termite bait stations only last one year and need to be maintained annually.
How do you treat termites under concrete?
To control a termite infestation underneath the slab, a pest control professional typically will recommend a termiticide treatment that can be applied through rods reaching under the house or holes drilled in the slab.
Can you apply Termidor without a trench?
Answer: Termidor SC can only be applied to the top of the soil when you are using it as a perimeter pest control treatment against ants. If you are using Termidor SC to treat for active termites, or to protect your home against termites, you must apply the product into a trench.
Why do they drill holes in concrete for termites?
Drilling into the slab is a good way to reach termites. Holes can also be drilled directly into infested wood, which is another way of reaching termites directly. Some of the other ways termites can infest your home is by getting into your crawl space or burrowing into your home through the soil along the foundation.
How do I permanently get rid of termites?
#3: Spray Boric Acid To Get Rid of Termites Permanently Make a solution of borax powder and water and spray it on the affected areas to get rid of termites at home. It's a non-toxic method and ensures termites in cupboards and other wooden furniture vanish after a few applications.
What time of day are termites most active?
Subterranean termites swarm during the day, particularly after rainfall. They're most active in the spring. Invasive Formosan termites swarm at night and are generally at their peak in the late spring and summer. Drywood termites are also active at night, especially around lights.
What to do if termites are in your walls?
1:154:53How to Treat Invisible Termites Behind Drywall with the XT ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou would treat them locally with foam or with xt 2000 or your preferred termiticide. Then you'dMoreYou would treat them locally with foam or with xt 2000 or your preferred termiticide. Then you'd spray a preservative.
Should I spraying for termites before pouring concrete?
Our most popular product is Dominon 2L for termite treatments. You should treat the entire area before they pour the slab. This is called a pre-treat. You should apply the product at a rate of 1 gallon per 10 square feet.
How far can termites travel under concrete?
Subterranean termites will make underground tunnels as they forage to travel long distances (up to 80 metres) from their nest to find food.
What do you put in termite holes?
Some of the best ways to get rid of termites is to apply termite-killing products to your home's exterior, use direct chemicals on the inside of your home, set up termite baits, and spray boric acid in your floors and walls.
How far apart should I drill holes when drilling a patio slab for termites?
I have a concrete slab patio at the rear of my house. How far apart should I drill holes? Can I just pore the solution in the hole? How far apart should he holes be and how much solution per hole? Thanks!
Answer
When performing a termite treatment and treating concrete slabs, the holes should be drilled about 2-3 inches away from the house, and 10 inches apart. Typically a 1/2 inch drill bit is used. You can fill the holes using a funnel or a one gallon hand pump sprayer with the nozzle turned so the sprayer shoots out a pinstream.
How far apart should I drill holes in concrete?
You drill holes throughout the concrete about 3-4 inches away from the wall or foundation, and about every 10"-12" apart. Once the holes are drilled, you fill at the same rate you did the trench, 4 gallons per 10 feet. To fill these I would recommend using the one gallon sprayer on a "pin stream" setting so you can force the liquid down ...
How many gallons of termite per 10 feet?
It is difficult to get 4 gallons per 10 feet in the holes, so it is important that you use a long drill bit, at least 18" long so you can bore out enough dirt to hold the termiticide.
How do I treat a concrete slab for termite?
To do this you will need a hammer drill with a 1/2" x 18" drill bit. You drill holes throughout the concrete about 3-4 inches away from the wall or foundation, and about every 10"-12" apart. Once the holes are drilled, you fill at the same rate you did the trench, 4 gallons per 10 feet. To fill these I would recommend using the one gallon sprayer on a "pin stream" setting so you can force the liquid down the hole and not splash it everywhere. You can also use a funnel and pour the termiticide down the holes. It is difficult to get 4 gallons per 10 feet in the holes, so it is important that you use a long drill bit, at least 18" long so you can bore out enough dirt to hold the termiticide. Once the holes are filled all you need to do is patch them with a concrete patch filler you can buy at Home Depot or you can use our Trebor plugs that will close the hole with no concrete mess.
What Is Termite Drilling?
Termite drilling involves drilling directly into the foundation of the termite-infested building. This process allows the termiticide to reach the area of the infestation directly.
Is Drilling Necessary for Termite Treatment?
Subterranean termites are the most common type of termite and cause billions of dollars in damage each year. These termites can eat books, paper products, cellulose-based products, and other plant-based goods. When trying to get rid of these termites, the recommendation is that you directly treat the infestation.
How To Use Drilling To Treat Termites
If you determine that drilling is necessary for termite treatment you need to locate the infestation. Once you locate your termite infestation, you need to drill into the drywall or infested wood then apply the product. Drill holes into the drywall about 18 inches above the floor and between each stud of the infested area.
Other Types of Termite Treatments
In addition to drilling, there are other termite treatments to rid your property of a termite infestation. Some common types are rodding, chemical treatment, bait treatment, tenting, fumigation, and heat treatment.
Related Questions
A number of factors will influence the cost to treat your home for termites. These include the size of the colony, the type of termite, the severity of the infestation, and the location of the infestation. Some termite control professionals will also take into account the size of the structure that requires treatment.
How Is Termite Treatment Performed
A termite treatment is a process of treating a house for termites. Among these termite treatments includes chemical treatment to the foundation of your home.
Why Do Professionals Drill Holes For Termite Treatment?
If you are puzzled why professionals drill holes for termite treatment, then you’re not alone!
Are These Holes Patched Up After Termite Treatment?
If you’re worried about the holes after termite treatment, then you can rest assured.
What Are Other Ways to Treat For Termites Without Drilling Holes?
If drilling holes doesn’t seem to be your best bet, there are still other methods of termite treatment.
In a Nutshell
As a homeowner, it is important to understand the importance of why professionals drill holes in the first place.
What is drilling in a house?
Drilling means exactly what you’d think it means. It involves drilling into the foundation of the building. It’s the same overall concept as rodding because it’s focused on getting the termiticide to the place where the termites live, but obviously, drilling requires more tools and more skill, because you’re drilling into the actual house or surrounding structures.
What is termite rodding?
Rodding. Rodding is used in conjunction with a trench dug in the soil to deliver treatment to an infested area. Traditional termite treatment uses a six-inch trench to make sure the termite treatment gets down to where the termites live.
How often are chemical injection holes drilled?
Holes were drilled every 12 inches around the perimeter for the chemical injection. The holes were filled with standard non-expansive grout. The installer said of this ‘oh, they pop out all the time’. ‘If you’re doing any sort of construction and banging around they come out’.
Can termite be treated with injection?
The injection method is most commonly used where there is extensive woodwork on wall, or where the area is highly infected by termite. Injection treatment is definitely not suitable for concrete buildings as shown in pic. The more suitable treatment can be tanting for such construction type. Antitermite.
Do termite exterminators inspect property?
it looks like the termite exterminators you have hired were not professionals. Usually termite control companies inspect property before choosing a suitable termite treatment. The injection method is most commonly used where there is extensive woodwork on wall, or where the area is highly infected by termite.
Is a termite plug water tight?
The typical plug appears about 10% smaller than the hole it is in, and it rattles if you wiggle it. This is not water tight, not radon resistant, not chemical resistant and most importantly the gaps are big enough to allow the entry of termites (the termiticide used is non-repellent). See also here.
Pros and Cons
- So, drilling holes is something you are interested in. When termite treatment drilling should be used and why? So, one of the most notable reasons for you to drill holes, is to insert repellents and/or baits inside the ground or your house’s wooden walls. And is it effective to drill holes in y…
Effective Or Not?
- If you would ask a professional the question above, then the answer would be: “Yes, yes of course!” Indeed, mostly, the further you go in pest-control, the better. In our case, we are going so far, that we are even drilling holes in the house! You are transporting the insecticide right into the termites’ habitat, there’s not many thing more effective than that. Though the speed of the progr…
Useful Articles
- If you interested in more information of termites we recommend you to read the following articles: 1. All types of termites. Are they harmful to humans? Can they bite you? And what is the difference between drywood and subterraneanones? 2. What does swarmers of different species look like: drywood, subterranean, formosan? 3. Signs of infestation outside and in the house: in …
Helpful Video
- This video show termite treatment drilling holes in concrete around a home for subterranean termites:
Conclusion
- All in all, drilling holes in your building, especially if you have an ongoing infestation should be done with care. You don’t want to fail and re-drill a hole, do you? Still, all thing considered, the method you’ve just read about is a really good and effective way and can not only be used for removing the currently existing nests, but, as it has already been stated above, for preventing th…