Water Treatment Plant Process
- Chemical Coagulation. The first chemical added is chlorine dioxide and it is an oxidant used to break down naturally occurring organic matter such as decaying leaves and other ...
- Flocculation. The coagulated water then flows to the next major unit process, the flocculation process. ...
- Sedimentation. ...
- Disinfection. ...
- Filtration. ...
What are the steps of a water treatment plant?
Apr 08, 2022 · Both types of treatment plants serve the purpose of cleaning water, but in general, wastewater treatment plants will output water, or effluent, into streams or rivers and drinking water plants, or potable water treatment plants, will output their treated water into a city’s pipe distribution network.
What are the 5 stages of water treatment?
Jun 30, 2016 · Don't forget about the thankless water treatment plant operators that keep treatment plants running 24/7 so you can always have fresh water. A lot of work goes into making sure you can have that ...
How is the water treated in a water treatment plant?
These coagulants are introduced in the water when it enters the treatment plant. The water is then passed through flocculation basins where slow mixing takes place. This mixing makes sure that thorough coagulation takes place. Once coagulation is completed, the water is pumped into a sedimentation basin.
What work do they do at a sewage treatment plant?
Aug 03, 2020 · Among the more effective methods of controlling pollution is with a wastewater treatment plant, which is designed to clean water and sewage before the water is returned to the environment. Wastewater treatment plants are able to get rid all different kinds of pollutants and solids that can be found in sewage, which ensures that the majority of pollutants are removed …
What are the steps of a water treatment plant?
They typically consist of several steps in the treatment process. These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution.
What are the 4 steps of water treatment?
4 Steps of Community Water TreatmentCoagulation and Flocculation. ... Sedimentation. ... Filtration. ... Disinfection. ... Learn More. ... Recommended Readings.
How a treatment plant works?
4:3910:03How Do Wastewater Treatment Plants Work? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply it's the breakdown of organic matter along with the use of excess oxygen. Some older plantsMoreSimply it's the breakdown of organic matter along with the use of excess oxygen. Some older plants will add in another step before aeration basins referred to as bio filters or trickling filters.
What are the 3 major steps in a water treatment plant?
There are three main stages of the wastewater treatment process, aptly known as primary, secondary and tertiary water treatment.Dec 6, 2018
What are the 5 stages of water treatment?
The 5 major unit processes include chemical coagulation, flocculation, sedimentation, filtration, and disinfection (described below). There are chemicals added to the water as it enters the various treatment processes.
What happens to poop at the water treatment plant?
The wastewater flows through bar screens to remove trash and debris, then slowly moves through a grit tank where sand and heavy particles settle and are removed.
How is waste water treated?
Four common ways to treat wastewater include physical water treatment, biological water treatment, chemical treatment, and sludge treatment. Let us learn about these processes in detail. In this stage, physical methods are used for cleaning the wastewater.Feb 8, 2018
What is sewage treatment plant and how it works?
Essentially, a sewage treatment plant operates by circulating air to encourage the growth of bacteria to break down sewage. The goal is to deliver much cleaner, more environmentally friendly effluent. It involves a similar process to a typical septic tank but has some key differences.Oct 14, 2019
Why is chlorine added to water?
Drinking water chlorination is the addition of chlorine to drinking water systems. It is the most common type of drinking water disinfection. Disinfection kills bacteria, viruses, and other microorganisms that cause disease and immediate illness.Apr 4, 2019
Is the water drinkable after it has been treated?
Potable water is water that is considered safe to drink. Tap water has usually been treated by the local municipality to make it potable, but there are times when the supply has been contaminated and you must treat water before using it.Dec 9, 2021
Why is wastewater treated with chlorine or UV light?
Unlike chemical approaches to water disinfection, UV provides rapid, effective inactivation of microorganisms through a physical process. The retention time required to achieve disinfection ranges from a few seconds compared to several (>30) minutes for chlorine disinfection.Sep 17, 2018
3. Coagulation
Even if the water appears relatively clear and free from large pieces of organic material, looking at a drop under a microscope would probably reveal a world of floating particles and microorganisms. To remove the tiny floaters and swimmers, technicians add chemicals such as aluminum and iron compounds that make them coagulate into small clumps.
4. Flocculation
Flocculation is similar to coagulation but with more dramatic results. In this step, turbines or paddles stir the water for 20 to 30 minutes to increase the frequency with which the smaller pieces bump into each other. This slow agitation causes clumped particles to form larger pieces called flocs.
5. Sedimentation
The flocculated water then rests in a sedimentation basin for 2 to 4 hours. During this time, the flocs gradually sink to the bottom, leaving behind water free from particulate matter. To ensure the sedimentation process removed all impurities, the product flows through a deep layer of sand or anthracite on its way to the final step.
6. Disinfection
The deadliest pathogens in drinking water are invisible to the naked eye. For this reason, the final step is to kill any microorganisms remaining in the otherwise clean drinking water by the addition of disinfectant chemicals. Chlorine is a common substance many plants use, but some also use ozone, chlorine dioxide, or chloramines.
What are the resources used in water treatment?
The local water treatment plants usually rely on natural resources for procuring water, however; that is not always the case. The resources include river, dam, and well. The water that is obtained from these sources is treated thus making it safe for humans to consume at a mass level.
How are coagulants introduced into water?
These coagulants are introduced in the water when it enters the treatment plant. The water is then passed through flocculation basins where slow mixing takes place. This mixing makes sure that thorough coagulation takes place. Once coagulation is completed, the water is pumped into a sedimentation basin. Water is allowed to sit thus enabling the ...
What are some examples of coagulants?
An example of a typical coagulant is aluminum sulfites that possess a charge opposite to that of the suspended solids. As you all know, opposite charges attract; coagulant and suspended solids become attached to one another. These coagulants are introduced in the water when it enters the treatment plant.
What is a coagulant in water?
This particular process is responsible for removing all of the natural particles that accompany water from the actual water source. Coagulants, when added to the water, can make the debris stick together. An example of a typical coagulant is aluminum sulfites that possess a charge opposite to that of the suspended solids.
How does water pass through a carbon filter?
Once the water reaches the filtration phase, it is made to pass through differing coarseness of sand. Particles keep on getting trapped as the coarseness of the sand filter decreases. In the end, the water is made to pass through an active carbon filter. Once the filtration is over, the water is disinfected. There are three approaches that can be ...
What are the three methods of disinfecting water?
Once the filtration is over, the water is disinfected. There are three approaches that can be employed; chlorination, ozone treatment, and ultraviolet treatment . These approaches can be used either individually or in combination. Once all of these steps are completed, water is pumped out to be used by the population.
Does filtration remove bacteria?
However, filtration helps remove the bacteria as well. Most of the water treatment plants make use of a sand filter. The sand filter is low-tech but is a very efficient way of carrying out water purification. Once the water reaches the filtration phase, it is made to pass through differing coarseness of sand.
1. Pre-treatment Phase
The pre-treatment phase that occurs at a wastewater treatment plant is designed to get rid of the larger and easier to remove items from the water. These items can include everything from tree branches and cans to plastic bottles and rags.
2. Primary Treatment Phase
Once the pre-treatment phase concludes, the primary treatment phase can begin. The wastewater will be collected in sedimentation tanks and large basins at this point, which is done to allow contaminants to sink to the bottom of the water.
3. Secondary Treatment Phase
This is a very important phase of the wastewater treatment process that involves the agitation and aeration of the water within secondary basins. It’s at this point in the process that microorganisms are added to the water in order to break down any organic matter into sludge that can be more readily discarded.
4. Sludge Treatment Phase
The final phase of the wastewater treatment process is referred to as the sludge treatment phase. During the secondary treatment phase, the solids and organic matter that remain in the water are converted into sludge that can be treated and recycled.
How is wastewater drained to the WWTP?
1. Firstly, wastewater is drained to the WWTP by gravity through the main sewer system of the size of a car. Having such size, objects you could hardly imagine reach the WWTPs, ranging from mattresses, fridges, tree branches to wallets disposed of by thieves in order to get rid of the evidence. 2.
What is wastewater water?
Wastewater can be divided into two major groups: Sewage water is all wastewater used in domestic dwellings (e. g. originating from toilets, showers or sinks). Industrial wastewater originates from production, industrial and commercial activities, and has a different chemical composition to sewage water.
How long does it take for sludge to dry out?
9. Sludge, digested and dewatered to the optimal degree, is finally disposed of at the dump. In about a month, sludge is adequately dried out and ripe. If it complies with agricultural standards, it can be reused for fertilisation of industrial crops.
What is the first stage of wastewater treatment?
The first mechanical stage is called preliminary treatment or rather pre-treatment. Water flows through gravel chamber for settling out the grit from water. Afterwards, gravel is disposed of at the dump. Water further reaches the bar screens used to remove large objects from the wastewater.
What is wastewater in agriculture?
What is wastewater? It is used water originating from domestic, industrial, agricultural, and medical or transport activities. Used water becomes wastewater upon the change of its quality, composition and/or temperature. However, wastewater does not include water released from ponds or reservoirs for fish farming.
What is the purpose of bar screens in wastewater treatment?
Water further reaches the bar screens used to remove large objects from the wastewater. At first come the coarse screens and then the fine screens which remove smaller objects such as matches, cigarette butts or undigested foods. 3. After the removal of large objects, grit is to be removed from the wastewater.
What is secondary treatment?
The secondary treatment, also called biological stage, is based on natural processes. WWTPs use bacteria which consume the contaminants, in particular biodegradable organics, carbon and phosphorus. Dead bacteria and organic residues subsequently transform into sludge. 6.
How is wastewater drained?
Waste water is drained through pipe systems and thus enters the public sewerage system . Here we differentiate between two types of drainage. In the combined sewer system, domestic and commercial wastewater is fed into a sewer together with rainwater that accumulates on sealed surfaces (e.g. streets and roofs).
What is the process of removing nutrient from wastewater?
In the actual clarifier, bacteria and fungi have the task of metabolising organic components in the wastewater into its individual parts. This process is called Biological nutrient removal. Oxygen-rich and oxygen-poor areas provide optimal conditions for breaking down all carbon and phosphate compounds and urea from the urine.
How does a separate sewer system work?
The separate sewer system divides the media. Dirty water is fed into one sewer, surface water into another. Because of the low dirt load, the collected surface water is usually discharged into neighbouring waters (lakes or rivers). The wastewater and the combined sewer both end up at the treatment plant. Of course, in the case of combined sewer ...
What is the process of cleaning a toilet called?
Rakes filter everything that is not permeable as solid matter in the wastewater. This can be toilet paper, wet wipes, but also a toothbrush or other things that do not belong in a toilet. This process is called pretreatment.
Where does wastewater end up in a combined sewer system?
The wastewater and the combined sewer both end up at the treatment plant. Of course, in the case of combined sewer systems, the sewage treatment plant has more work to do, as all the surface water has to be cleaned as well.
What happens to clarified water?
In the end, the clarified water is returned to the natural water cycle, usually lakes or streams. Very modern sewage treatment plants have additional treatment stages for further phosphorus elimination or the killing of pathogens.
How much water does a person use?
Each person uses an average of 120 litres of water per day. This is used for a wide variety of purposes (body cleansing, cooking, flushing toilets, etc.).
Pre-Sedimentation
- If the filtered water is cloudy, pipes divert it to pre-sedimentation basins. Spending time here allows organic materials, sand, and silt to sink to the bottom. Hopper bottoms and continuous mechanical sludge removal devices are additions to the basins that speed up the process. The main goal of this step is a decrease in turbidity, which is the technical term to describe water’s c…
Coagulation
Flocculation
Sedimentation
- The flocculated water then rests in a sedimentation basin for 2 to 4 hours. During this time, the flocs gradually sink to the bottom, leaving behind water free from particulate matter. To ensure the sedimentation process removed all impurities, the product flows through a deep layer of sand or anthracite on its way to the final step.
Disinfection
- The deadliest pathogens in drinking water are invisible to the naked eye. For this reason, the final step is to kill any microorganisms remaining in the otherwise clean drinking water by the addition of disinfectant chemicals. Chlorine is a common substance many plants use, but some also use ozone, chlorine dioxide, or chloramines.