Using Glove Foam
- Buy a baseball-glove foam treatment from a sporting-goods store. This method is equivalent to breaking in a new glove...
- Apply the foam and lather it into the glove. Cover the entire surface of the glove. Coat the back of the glove as...
- Place the glove in a 300ºF oven for four minutes. Put the foamed glove on a cloth-covered baking sheet.
How to take care of your gloves?
1. If the leather is dirty, clean with a damp cloth. Do not machine wash leather gloves. 2. Squeeze on the waterproofing wax, following the product instructions. 3. Rub the cream into the leather, paying special attention to the seams. Let it sit for a few minutes, then remove any significant excess with a damp cloth. 4. Air dry. Do not wring gloves.
What is the best way to break in a glove?
Dry the gloves in room temperature and avoid any heating source. Gloves made from goat leather and cowhide need to be balmed. We do not recommend any other balming or impregnation products then Hestras leather balm. Buy the leather balm. Replace the lining. When the lining is worn out, replace it with a new one rather than replacing the whole glove.
How do you use glove oil?
When using glove oil, apply to a sponge or cloth, then use the sponge or cloth to apply the oil to the areas of the glove that are currently firm. Start with the palm, then the breakpoint of the glove and then the web. Then use the glove oil on all other parts of the glove including the entire inside to help moisturize and protect the glove.
What should I do if my nitrile gloves are irritating?
Glove Wraps. To help your glove form its pocket, fold it in half, place a baseball or softball in the pocket, and tie it up using a glove wrap or old pair of shoelaces. You can also use this method to help your glove keep its shape when you aren’t using it. …
How do you use glove treatment?
How to Break in a Ball GloveMOISTEN THE GLOVE'S LEATHER. Pour a small amount of hot water (150 to 170 degrees Fahrenheit) over any area of your new glove you want to make softer. ... WORK THE MOST RIGID PARTS OF YOUR GLOVE. ... SOFTEN THE GLOVE. ... SHAPE THE GLOVE. ... JUST PLAY CATCH. ... CONDITIONING THE GLOVE THROUGHOUT THE SEASON.
What can you use to condition your glove?
Most people use shaving cream (preferably with lanolin), but you may also use others like Vaseline, mink oil, tanner's glove oil, glove manufacturers oils, saddle soap, etc. Lubricate the glove with your lube preference, say shaving cream. Take a very small amount, and put it on a soft, clean cloth like a dish towel.
How do you condition an old glove?
Use neatsfoot, mink oil or any other glove conditioning product to condition your glove, but stay away from petroleum-based products like Vaseline. Whichever conditioner you choose, work it into the leather well with a clean rag or small sponge. Dab (don't rub) the excess off with another clean, dry rag.
Is glove oil good for your glove?
Adding glove oil to your gloves will keep your glove last longer and be more durable. Oils and conditioners will soften the leather, making breaking in a glove easier. Not only that, but it also lubricates the leather and keeps your glove from cracking.
What can I use for glove oil?
Lanolin is the main ingredient in most glove conditioners, but you can use pure lanolin oil over glove conditioners if you want to avoid applying additional cleaning chemicals when breaking in your glove. You can purchase lanolin oil at most hardware stores and some sporting goods stores.
How often should you oil your glove?
In extremely dry climates it is best to oil your baseball glove at least once per week. Even in wetter climates, the glove should still be oiled once per month at a bare minimum. 1 Not too sure about Your Climate?
How can I make my gloves stiff again?
What Does “Stiffen Up On Baseball Gloves” Mean?Take some hot water, not more than heated in 150-170 degrees Fahrenheit.Pour the water on the new gloves.Wipe the extra water with a towel or cotton cloth.You can take a slight drop of gloves oil or condition on a sponge and apply it to the gloves.More items...•
Can you use mineral oil on a baseball glove?
Additionally, stay away from “glove oils” (such as Rawlings' Glovolium), mineral oil, neat's foot oil, mink oil, and all other oils. Putting oil in your glove will soften it, but it will also make your glove heavy.
Can you use linseed oil on baseball glove?
Using Baseball Glove Oils and Conditioners When using oils and conditioners to break in your glove, the first thing you should know is that products like Vaseline, petroleum jelly, olive oil, mink oil, and linseed oil should never be used.
How do you oil a glove?
0:283:02How To Break-In A Baseball Or Softball Glove - YouTubeYouTubeStart of suggested clipEnd of suggested clipOil. Step 2 shaping the glove. Shaping the glove is an important step because this is where you formMoreOil. Step 2 shaping the glove. Shaping the glove is an important step because this is where you form the pocket. To begin place the ball inside the mitt where the pocket meets the palm.
How do MLB players break in their gloves?
Some break them in by dunking them in water or placing them in a microwave oven. Some, like Rodriguez, lather them with shaving cream. Others beat them with a mallet, as if tenderizing a steak.
Does shaving cream help break in a baseball glove?
You can expedite the breaking-in process by applying shaving cream to your baseball glove. The shaving cream helps soften the leather, making the baseball glove more comfortable.
Can you machine wash wool gloves?
When the lining is worn out, replace it with a new one rather than replacing the whole glove. If it is dirty, wash it! Wool linings should always be hand washed. Many other linings can be machine washed, but you should always follow the care label. Find linings.
Do Hestra gloves last?
Hestra gloves are made to last. A little love and care will help them last even longer. Good for you and the environment. Keep in mind that sport and dress gloves should be taken care of in different ways.
What to use to clean a baseball glove?
Clean and condition your baseball glove using safe leather product, such as Lexol leather cleaner and conditioner, or Kelley Glovolution. Some people recommend using a lanolin shaving cream! Don't spit on your glove, as the material in your saliva can deteriorate it. Reshape your glove.
How to store a glove?
Store your glove between uses on a shelf in a cool dry place, or at room temperature. Don't leave your glove sitting around outside, near a heater, or in your equipment bag. Keep your glove dry. If your glove gets wet, dry if off as well as you can with a clean absorbent rag and let it naturally air dry.
How to check for broken laces on gloves?
Check in between the fingers of your gloves for open seams and palms, and check for broken laces. If you find any, have them repaired as soon as possible to prevent injury and mishaps.
How to reshape a softball glove?
At least once a season place a softball in the pocket of your glove, and wrap it with a binder. Tighten or retie the laces in the fingers and web of your glove; best to use square and overhand knots.
How to keep baseball gloves in top condition?
Routine Maintenance. Clean your baseball glove after each use. Remove it from your equipment bag, wipe the dirt and debris off with a clean rag, and store it on a shelf.
How to break in a baseball glove?
Break in your glove naturally. Best way to break in your glove is to play ball with it! Don't try and force your glove using the old home remedies such as soaking, lubricating, baking, beating, etc. which will do nothing more than wreck your glove. (See How to Break in a Baseball Glove ).
How to clean a Lexol glove?
A little tender loving care between uses or at least once a season, and you'll have a glove that lasts you many seasons. Here's what to do: 1 Brush the dirt and dust off your glove with a light brush. 2 Use a damp cloth or sponge to apply a small amount of glove leather cleaner; Lexol leather cleaner is good. Wipe the entire glove with it. 3 Remove the cleaner from the glove with a damp cloth or sponge, and allow to air dry. 4 Rub in an oil product safe for baseball glove leather, such as Lexol leather conditioner, Kelley Glovolution, or a lanolin-based product to the entire glove, and store.
How to keep a glove from getting brittle?
Use the glove oil sparingly; you can always add more. At the end of the season, gently apply glove oil to keep your glove from becoming brittle. Store your glove in a dry place with a ball in the pocket to maintain shape. Do not use neat's-foot oil, linseed oil or silicon-type spray.
How to apply shaving cream to a glove?
If you are using shaving cream, you can apply it with your bare hand. When using glove oil, apply to a sponge or cloth, then use the sponge or cloth to apply the oil to the areas of the glove that are currently firm. Start with the palm, then the breakpoint of the glove and then the web.
Can you microwave a baseball glove?
Do not use an oven or microwave to break in your baseball or softball glove. This will damage your glove beyond repair.
Is there a shortcut to breaking in a glove?
There is no shortcut to breaking in a glove, playing catch remains the best way.
How long does it take for a glove to absorb oil?
Excessive glove conditioner/oil will damage and shorten the life of a new glove. Allow the glove oil to absorb into the leather for 24 hours in a warm area. Play catch daily until the glove is ready for gameplay. Use the glove oil sparingly; you can always add more.
Where are the tight spots on a baseball glove?
Some of the tightest spots are around the thumb and the pinky. It is helpful to pull these parts of the glove towards and away from each other. This helps to loosen the binding and leather to allow the glove to squeeze and catch the ball. It’s also helpful to pull and move the other fingers in the glove.
Why do my gloves crack?
Make sure that the laces get oiled so they can stay moisturized as well. Failure to do so can cause them to begin to crack and the webbing to become loose. Remember, leather is a skin and leather experts tell us not to treat glove leather any differently than you would your own skin.
What to do when breaking in a new glove?
Playing Catch. The number one recommendation when breaking in a new glove is to just play with it. Playing catch will allow the leather in the glove to mold to your hand and fingers.
How to keep a baseball glove in shape?
Glove Wraps. To help your glove form its pocket, fold it in half, place a baseball or softball in the pocket, and tie it up using a glove wrap or old pair of shoelaces. You can also use this method to help your glove keep its shape when you aren’t using it. In addition to this, treat your glove with respect.
How to stretch leather mitts?
Work the Hinges. Using both hands, grab the mitt on the left and right sides and while holding it tight, act like you are punching something, alternating hands. This helps to stretch the internal pad fibers and soften up the leather.
Does running a glove over help?
However, you just made an investment in a quality glove, and running it over isn’t going to help your glove keep that shape . There is a good chance that will likely just get it dirty instead and the leather will break down.
Can you microwave a ball glove?
Don’t Use the Oven or Microwave. Some people swear by heating up a ball glove in the oven or microwave to help soften the leather, but this can do irreversible damage. This dries out your glove, potentially to the point that your laces break or the overall glove shrinks in size.
Can you steam baseball gloves?
Many other companies recommend steaming leather baseball gloves. We definitely DO NOT. Like with any high quality leather, applying heat and water to it will cause the leather to break down. Although steaming may seem like a quick, easy shortcut to breaking in a glove, it will shorten the life span of the leather and will severely dry out the laces.
Does Nokona Leather Treatment really work?
While using Nokona Leather Treatment ( NLT) isn’t enough to completely break a glove in on its own, it can help make the leather softer. Also, using it consistently will also prolong the overall life of the glove. Be careful not to oversaturate the leather.
How to break in a glove?
So just throw a ball into the pocket of the glove over and over again. You can also use a little bit of oil, but not a lot; don't overdo it. Other than that, just play catch, and the better you get, the more you want to play with somebody that can throw hard. If you're playing catch and going hard and you're catching the ball in the pocket, then it will start breaking in.
How to soften leather baseball glove?
Purchase baseball glove conditioning oil. Most manufacturers offer oils specifically formulated to treat their gloves. Applying a small amount of conditioning oil will soften, enrich, and preserve the leather in the pocket of your glove.
How long to bake a glove in oven?
Place the glove in a 300ºF oven for four minutes. Put the foamed glove on a cloth-covered baking sheet. Set it on the top rack of the oven.
Where to hit a glove for a deeper pocket?
Hit the glove near the webbing for a deeper pocket or more toward the palm of the glove for a shallow pocket.
How to steam a leather glove?
Place the glove on a rack above a pot of water and turn the burner on. Be sure to keep your glove several inches above the water to avoid splashing. Place a curved lid or a large upside-down bowl over the glove to trap the steam. Let the glove sit in the steam for two-to-five minutes, depending on how soft you want the leather. You want the temperature of the glove to reach about 150° F.
Can you use string on a glove?
Don't use string for this. Tightly wound string or twine can leave an odd-looking imprint around the outside of the glove.
Where to put a ball in a glove?
Put a ball in the glove. Put it in the "sweet spot." The sweet spot is where you would ideally catch the ball, in the lower part of the webbing between the thumb and forefinger.
How to clean a glove?
Start off by cleaning dust and dirt from your glove by shaking it and wiping it with a damp cloth — ideally, one made from microfiber . If you have some particularly difficult spots of dirt or marking you’d like to remove, you can try a dab of rubbing alcohol on the cloth; if there’s mold or mildew, soak a rag with vinegar and use it to wipe it away (for really tough grime or mold, try using a Mr. Clean Magic Eraser ). Now leave the glove to dry completely before applying the re-conditioner.
What soap is used on leather boots?
It makes sense — saddle soap is made for, well, leather horse saddles (as well as leather boots), and baseball gloves are made of leather, so, there you go. Boot lovers, horse people, cowboys, and others who live with leather swear that Fiebing’s Paste Saddle Soap.
Why do gloves make my skin red?
Contact dermatitis is usually caused by an allergic reaction to the rubber accelerators used to manufacture nitrile gloves. These chemicals include thiurams, dithiocarbamates, and mercaptobenzothiazole. They may be the true cause of a red, itchy rash after wearing nitrile rubber gloves.
What is the most common type of skin irritation for a variety of occupations requiring gloves?
Allergic contact dermatitis is an allergic skin reaction similar to eczema that forms after direct contact with the skin. This is the most common type of simple skin irritation for a variety of occupations requiring gloves.
What to do if your hands are red?
If redness of hands occurs, wash your hands with soap and use hydrocortisone cream on the area.
Do nitrile gloves have latex?
Do they have latex proteins? The latex proteins found in latex gloves are what cause many allergic reactions. Nitrile gloves do not contain latex proteins. An allergic reaction to the chemicals used to make the gloves will be milder and generally not life-threatening. Only 1% of people experience this problem.
Can nitrile gloves cause skin irritation?
Some people experience skin irritation when wearing nitrile gloves. Nitrile rubber is a synthetic rubber used to produce latex-free gloves. People can become allergic to the chemicals added during the manufacturing of nitrile processes. Those with very sensitive skin may need to avoid wearing them at all times.
Can you wear nitrile gloves for too long?
Do not wear the gloves for too long. Nitrile gloves, like other types of gloves, can chafe the skin and cause irritation if they are worn longer than necessary. The best way to prevent nitrile allergy reactions is to avoid wearing them.
Can you get nitrile gloves off?
At the first sign of irritation, take the gloves off immediately and wash your hands with soap and water. Use vinyl gloves in the meantime to see if the problem clears up completely.
How to treat vinyl glove allergies?
How to Treat Vinyl Glove Allergy. The best vinyl glove allergy treatment is to just take off the gloves. Any reaction that does occur is very mild and solved by simply removing the gloves and washing hands. Contact urticaria can also be treated with antihistamines.
What chemicals are used in gloves?
Many chemicals used in these gloves, including carba mix, mercaptobenzothiazole (MBT), thiuram mix, combined dialkyl thioureas, and black rubber mix, have been linked to contact allergic reactions to PVC. Allergic contact dermatitis has also been reported as a common type of reaction.
What gloves are good alternatives to chemical accelerators?
Both powder free and accelerator free are great options for those sensitive to latex and chemical accelerators. Synthetic gloves, such as neoprene or nitrile, manufactured with different additives are also good alternatives.
Why are my gloves irritated?
Accelerator free gloves do not contain chemical accelerators. The most common irritation that occurs with vinyl gloves is caused by chemical allergies. Sensitivity to accelerators used in manufacturing can cause skin irritation. Accelerator free gloves removes that risk.
How to treat hand allergies?
Remember to replace gloves regularly. Remove them immediately if your hands feel sweaty. Wash your hands thoroughly with mild soap and allow them to dry completely. Replace gloves every time you notice a puncture or tear.
Can petroleum be used in vinyl gloves?
Petroleum is also used in the manufacturing process of vinyl gloves and is often the source of an allergic reaction. While it is uncommon, it may occur in some people.
Why are vinyl gloves so popular?
Vinyl disposable gloves are a popular choice in the food industry. Many other industries love to use them because of their affordability. The risk of latex allergies is not a problem since this type of glove does not contain the protein found in latex gloves.
