hi float balloon treatment how long

Full Answer

How long will a Hi Float balloon last?

With ULTRA HI-FLOAT, party decorations can be prepared a day ahead of time, and balloon bouquets will float for several days. Helium-filled latex balloons float 25 times longer on average with ULTRA HI-FLOAT, and air-filled latex balloons maintain full size for over one month with ULTRA HI-FLOAT. HI-FLOAT is very safe.

What is Hi-Float balloon treatment?

HI-FLOAT balloon treatment is a solution of a plastic material dissolved in water. It forms a coating inside latex balloons that greatly reduces helium or air loss. Check out our What is HI-FLOAT video. With ULTRA HI-FLOAT, party decorations can be prepared a day ahead of time, and balloon bouquets will float for several days.

How do you increase the float life of a balloon?

Adding as much HI-FLOAT as possible will increase the float life, but the balloons do need to float upward. They should not lean to one side. For maximum float time at high altitudes, pre-stretch balloons with air before treating them with ULTRA HI-FLOAT and inflating with helium.

How do you use a Hi-Float® balloon pump?

1. Choose the correct size restriction clip from the pump set. This will allow the correct amount of ULTRA HI-FLOAT ® and SUPER HI-FLOAT ® to be used for each balloon. 2. Place the nozzle of the pump inside the balloon as deeply as possible and pump down only once. 3.

How long will balloons last with hi-float?

about 2-3 days11” latex balloons generally last between 12-20 hours filled with helium, and about 2-3 days when treated with Hi-Float. Foil balloons last approx. 5-7 days. Air-filled balloons generally last for a couple of weeks, but will not float.

Does Hi-float really work?

HI-FLOAT prevents air from escaping through the walls of a latex balloon. It actually does an even better job of preventing air loss than it does with helium. HI-FLOAT works in air-filled round and non-round balloons, such as 260s.

How do you use ULTRA HI-FLOAT balloon treatment?

1:143:19HI-FLOAT Basic Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe high float should go into the base of the balloon to press the pump plunger as far as it will goMoreThe high float should go into the base of the balloon to press the pump plunger as far as it will go pinch the balloon as it is removed cleaning. Off the pump outlet nozzle.

How long does a balloon installation last?

Inside air-filled balloon arch A standard balloon arch made with properly inflated latex balloons will last anywhere from 12 hours to 2 days without any significant issues.

How long does it take HI-FLOAT to dry?

Latex Balloon SizeLatex Balloon TypeAverage Flying Time (Helium and ULTRA HI-FLOAT*)11 inchesSTANDARD COLORS1-4 weeks11 inchesMETALLIC OR PEARLIZED1-3 weeks14 inchesROUND2-5 weeks16 inchesROUND3-7 weeks6 more rows

How much HI-FLOAT do you use?

It is very similar to the glue found on the back of postage stamps. The ULTRA HI-FLOAT pint will treat 100 11-inch balloons and the ULTRA HI-FLOAT 5 oz. will treat 25 11-inch balloons or 50 9-inch balloons.

Is HI-FLOAT safe to inhale?

Helium is not toxic nor flammable, but breathing it can result in asphyxiation (loss of consciousness due to insufficient oxygen). Most of our latex helium balloons are treated with Hi-Float and while it is non-toxic, you don't want to put it in your lungs either!

Does high float dry clear?

ULTRA HI-FLOAT® and SUPER HI-FLOAT® are non-toxic sealants that can be used inside latex balloons to increase the floating time. Both dry crystal clear and form a barrier to the helium inside the balloon.

Can you use HI-FLOAT without helium?

0:081:16HI FLOAT in Air Filled Balloons - YouTubeYouTubeStart of suggested clipEnd of suggested clipUltra-high float is not just for use with helium-filled balloons. It can also be used to prolong theMoreUltra-high float is not just for use with helium-filled balloons. It can also be used to prolong the life of air fill balloons high flow prevents air from escaping through the walls of latex balloon.

How long does a balloon arch take?

You can make a small balloon arch by yourself in 2-3 hours. If you have help blowing up balloons and tying them together, you could make it much faster.

Will a balloon arch last a week?

If kept indoors, your balloon arch can easily last for a few days, but it'll only last for less than a day if left outside. However, if you need it to last longer, some professionals can treat the arch with a specific material that can make it last for several weeks.

How early can I make balloon arch?

If it's a helium filled arch, like a String-of-Pearls Arch, it's best to do the arch on the day of the birthday party. Helium filled latex balloons only float well for about 10 to 12 hours. If you want to do your helium-filled arch the night before the event, I highly recommend you treat your balloons with hi-float.

How to use Ultra Hi-Float?

1. Choose the correct size restriction clip from the pump set. This will allow the correct amount of ULTRA HI-FLOAT ® and SUPER HI-FLOAT ® to be used for each balloon. 2. Place the nozzle of the pump inside the balloon as deeply as possible and pump down only once. 3.

When to use Hi-Float?

You can use Hi-Float for any event that you are going to be using balloons at. However, many people use it for more formal events and celebrations where the balloons are going to need to remain floating for longer than usual. Examples of such events may include but are not limited to: corporate events, weddings, and tradeshows.

What is ultra hifloat?

Hi-Float®. ULTRA HI-FLOAT ® and SUPER HI-FLOAT® are non-toxic sealants that can be used inside latex balloons to increase the floating time. Both dry crystal clear and form a barrier to the helium inside the balloon. Only use ULTRA HI-FLOAT® and SUPER HI-FLOAT® with latex balloons. 1.

Can you use Ultra Hi-Float in Superagate?

These balloons are heavier due to composition and will float better if slightly less of the solution is used. ULTRA HI-FLOAT ® and SUPER HI-FLOAT ® should not be used inside Superagate ® latex balloons. Welcome!

Does Hi-Float really work?

Absolutely! The secret is the Hi-Float doesn't allow the inflating gas to escape through the surface of the balloon. In fact, Hi-Float works even better with oxygen than it does with helium.

How long does it take for Ultra Hi-Float to dry?

It takes a few hours after inflation for the ULTRA HI-FLOAT to dry enough so that it will not splatter if the balloon bursts. Although it is not toxic, wet, splattered ULTRA HI-FLOAT is sticky and could damage furniture or surfaces such as walls. Inflate the balloons and keep them away from such surfaces for the first few hours after inflation. If this is not possible, cover the immediate area with drop-cloths.

How to get HI-flat out of balloon?

5. Rub the balloon for a couple of seconds to spread the HI-FLOAT inside the balloon. While rubbing, elevate the opening to allow air to escape and to prevent liquid from entering the neck of the balloon. See Figure 7.

What is a hi float?

One final note: HI-FLOAT is designed to work in balloons that are kept indoors in a climatecontrolled location, with heater or air-conditioner running. HI-FLOAT treated balloons that are kept outdoors, in humid environments or in non-climate-controlled locations may not float for an extended time. FIGURE 1. FIGURE 2.

How to use a HI-FLOAT pump?

1. Remove the cap from the bottle and securely attach the pump, then turn the pump counterclockwise to unlock the nozzle. (For the first use, hold a cup under the nozzle and pump several times until the HI-FLOAT comes out.) See Figures 1-4.

How long should I flush my eye with water?

If ULTRA HI-FLOAT contacts the eye, flush with water for several minutes. If irritation persists, consult a physician. One final note: HI-FLOAT is designed to work in balloons that are kept indoors in a climate-controlled location, with heater or air-conditioner running.

Is Hi-Float irritating?

HI-FLOAT is nontoxic and non-irritating. It is very similar to the glue found on the back of postage stamps. In addition to a bottle of ULTRA HI-FLOAT, a reusable pump kit is required.

Can you use glasses with Ultra Hi balloons?

For added safety, glasses or safety goggles are recommended when inflating treated balloons to avoid eye contact. If ULTRA HI-FLOAT contacts the eye, flush with water for several minutes. If irritation persists, consult a physician.

What is the best way to make a balloon last longer?

try to use foil balloons instead of latex ones. Hi-Float is a liquid-like coating, a solution of a plastic material dissolved in water that goes inside of the balloon. It spreads on the inside and prevents helium from escaping as easily. This is definitely the best way to make latex helium balloons last the longest.

What is a hi float balloon?

the shape of the balloon (round ones last longer) how well it’s sealed ( quality) Hi-float is a liquid used to extend the life of the helium balloons. If your balloons are treated with hi-float then they will definitelly last overnight, and will look good the next day as well.

Why do latex balloons last longer?

Reason why latex balloons last for a shorter time is because they are porous, so helium leaks out of them easily. Foil balloons are less porous, so they last much longer.

How does the size of a balloon affect the float time?

The size, as well as the shape, affects the float time. The more helium the balloon has, and the “more round” it is, the longer it will last.

Why do balloons pop?

This is because helium expands in the heat, so it will escape faster from the balloon. These balloons can pop if you leave them in a very hot place, such as in your car during a hot summer day, and even on the sun. Mylar/Foil balloons will last much longer than latex in the sun, up to 24 hours, sometimes longer.

How long does a 9-12 balloon last?

A 9-12” latex helium filled balloon will last 8 to 12 hours in a box, perhaps longer if it’s of good quality. Chilled areas are good for balloons, rather than hot or cold areas, because they will retain their helium molecules (will last for long because it’s not hot) and won’t shrink due to cold temperatures.

How does temperature affect helium balloons?

Temperature greatly affects the longevity of the helium filled balloons. In fact, the hotter it is outside, the shorter the life span of the helium balloon. For the best possible results, keep your balloons indoors, in an air-conditioned room. Let’s see how the environment affects how long the balloons will last.